This is a continuation of the previous two commits.
As allocating a JS cell already primarily involves a realm instead of a
global object, and we'll need to pass one to the allocate() function
itself eventually (it's bridged via the global object right now), the
create() functions need to receive a realm as well.
The plan is for this to be the highest-level function that actually
receives a realm and passes it around, AOs on an even higher level will
use the "current realm" concept via VM::current_realm() as that's what
the spec assumes; passing around realms (or global objects, for that
matter) on higher AO levels is pointless and unlike for allocating
individual objects, which may happen outside of regular JS execution, we
don't need control over the specific realm that is being used there.
This doesn't matter per se as the value is immediately validated to be
in the 0 to 2^32 - 1 range, but it avoids having to cast a number that
potentially doesn't fit into a size_t into one at the call site. More
often than not, array-like lengths are only validated to be <= 2^52 - 1,
i.e. MAX_SAFE_INTEGER.
This is fully backwards compatible with existing code as a size_t always
fits into an u64, but an u64 might not always fit into a size_t.
This commit removes all exception related code:
Remove VM::exception(), VM::throw_exception() etc. Any leftover
throw_exception calls are moved to throw_completion.
The one method left is clear_exception() which is now a no-op. Most of
these calls are just to clear whatever exception might have been thrown
when handling a Completion. So to have a cleaner commit this will be
removed in a next commit.
It also removes the actual Exception and TemporaryClearException classes
since these are no longer used.
In any spot where the exception was actually used an attempt was made to
preserve that behavior. However since it is no longer tracked by the VM
we cannot access exceptions which were thrown in previous calls.
There are two such cases which might have different behavior:
- In Web::DOM::Document::interpreter() the on_call_stack_emptied hook
used to print any uncaught exception but this is now no longer
possible as the VM does not store uncaught exceptions.
- In js the code used to be interruptable by throwing an exception on
the VM. This is no longer possible but was already somewhat fragile
before as you could happen to throw an exception just before a VERIFY.
It relies on a mapper function to convert each T& to a JS::Value. This
allows us to avoid awkward Vector<T> to MarkedValueList conversion at
the call site.
It's way too easy to get this wrong: for the IsArray abstract operation,
Value::is_array() needs to be called. Since we have RTTI, the virtual
Object::is_array() method is not needed anymore - if we need to know
whether something is *actually* a JS::Array (we currently check in more
cases than we should, I think) and not a Proxy with an Array target, we
should do that in a way that doesn't look like an abstract operation.
This is a huge patch, I know. In hindsight this perhaps could've been
done slightly more incremental, but I started and then fixed everything
until it worked, and here we are. I tried splitting of some completely
unrelated changes into separate commits, however. Anyway.
This is a rewrite of most of Object, and by extension large parts of
Array, Proxy, Reflect, String, TypedArray, and some other things.
What we already had worked fine for about 90% of things, but getting the
last 10% right proved to be increasingly difficult with the current code
that sort of grew organically and is only very loosely based on the
spec - this became especially obvious when we started fixing a large
number of test262 failures.
Key changes include:
- 1:1 matching function names and parameters of all object-related
functions, to avoid ambiguity. Previously we had things like put(),
which the spec doesn't have - as a result it wasn't always clear which
need to be used.
- Better separation between object abstract operations and internal
methods - the former are always the same, the latter can be overridden
(and are therefore virtual). The internal methods (i.e. [[Foo]] in the
spec) are now prefixed with 'internal_' for clarity - again, it was
previously not always clear which AO a certain method represents,
get() could've been both Get and [[Get]] (I don't know which one it
was closer to right now).
Note that some of the old names have been kept until all code relying
on them is updated, but they are now simple wrappers around the
closest matching standard abstract operation.
- Simplifications of the storage layer: functions that write values to
storage are now prefixed with 'storage_' to make their purpose clear,
and as they are not part of the spec they should not contain any steps
specified by it. Much functionality is now covered by the layers above
it and was removed (e.g. handling of accessors, attribute checks).
- PropertyAttributes has been greatly simplified, and is being replaced
by PropertyDescriptor - a concept similar to the current
implementation, but more aligned with the actual spec. See the commit
message of the previous commit where it was introduced for details.
- As a bonus, and since I had to look at the spec a whole lot anyway, I
introduced more inline comments with the exact steps from the spec -
this makes it super easy to verify correctness.
- East-const all the things.
As a result of all of this, things are much more correct but a bit
slower now. Retaining speed wasn't a consideration at all, I have done
no profiling of the new code - there might be low hanging fruits, which
we can then harvest separately.
Special thanks to Idan for helping me with this by tracking down bugs,
updating everything outside of LibJS to work with these changes (LibWeb,
Spreadsheet, HackStudio), as well as providing countless patches to fix
regressions I introduced - there still are very few (we got it down to
5), but we also get many new passing test262 tests in return. :^)
Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
Specifically, this now explicitly takes the length, adds missing
exceptions checks to calls with user-supplied lengths, takes and uses
the prototype argument, and fixes some spec non-conformance in
ArrayConstructor and its native functions around the use of ArrayCreate
This is now a bit closer to the spec's 10.4.2.2 ArrayCreate - it will
throw a RangeError if the requested length exceeds 2^32 - 1, so anyone
passing in a custom value (defaults to zero for same behaviour as
before) will need an exception check at the call site.
SPDX License Identifiers are a more compact / standardized
way of representing file license information.
See: https://spdx.dev/resources/use/#identifiers
This was done with the `ambr` search and replace tool.
ambr --no-parent-ignore --key-from-file --rep-from-file key.txt rep.txt *
Letting these create and return a JS::Array directly is pretty awkward
since we then need to go through the indexed properties for iteration.
Just use a MarkedValueList (i.e. Vector<Value>) for this and add a new
Array::create_from() function to turn the Vector into a returnable
Array as we did before.
This brings it a lot closer to the spec as well, which uses the
CreateArrayFromList abstract operation to do exactly this.
There's an optimization opportunity for the future here, since we know
the Vector's size we could prepare the newly created Array accordingly,
e.g. by switching to generic storage upfront if needed.
https://tc39.es/ecma262/#sec-properties-of-the-array-prototype-object
The Array prototype object: [...] is an Array exotic object and has the
internal methods specified for such objects.
NOTE: The Array prototype object is specified to be an Array exotic
object to ensure compatibility with ECMAScript code that was created
prior to the ECMAScript 2015 specification.
