These Markdown files are now embedded in a YAML
file for templating in the documentation, and
these special markers are no longer needed.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 7e3169f26d)
Command name should be a H1
Only Description, Examples, and Related Commands should be H2
Changed 'Related information' heading to 'Related commands' since 99% it is only linking commands
Added some examples where relevant
Signed-off-by: Misty Stanley-Jones <misty@docker.com>
(cherry picked from commit 52df69f00d)
Add zsh completion for missing 'docker plugin' commands and options
(cherry picked from commit da9a162301)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
fix status-code for "locked" swarm and "certificate expired"
(cherry picked from commit 6486924f0b)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Windows: Retry workaround for RS1/RS2 compute system enumeration
(cherry picked from commit 7761c69e23)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- otherwise the attachment task will stay in store and
consume IP addresses and there is no way to remove it.
Signed-off-by: Alessandro Boch <aboch@docker.com>
add status code 404 for plugin api endpoint enable and disable
(cherry picked from commit 0113128b2a)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
API: Delete container can return 409, but that isn't documented.
(cherry picked from commit 86f962a4a8)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This was added in 03c6949739 but spec was
not updated.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit ae48cd04da)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
Fixes manpages for p and z by downloading a specific version
of go instead of relying on the distro version.
Signed-off-by: Christopher Jones <tophj@linux.vnet.ibm.com>
(cherry picked from commit 5bec1b6864)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
While it is important to not create controllers for an invalid task,
certain properties should only be checked immediately before use. Early
host validation of mounts prevents resolution of the task Executor when
the mounts are not relevant to execution flow. In this case, we have a
check for the existence of a bind mount path in a creation function that
prevents a task controller from being resolved. Such early validation
prevents one from interacting directly with a controller and result in
unnecessary error reporting.
In accordance with the above, we move the validation of the existence of
host bind mount paths to the `Controller.Start` phase. We also call
these "checks", as they are valid mounts but reference non-existent
paths.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
(cherry picked from commit 92899ffac8)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
This persists the "propagated mount" for plugins outside the main
rootfs. This enables `docker plugin upgrade` to not remove potentially
important data during upgrade rather than forcing plugin authors to hard
code a host path to persist data to.
Also migrates old plugins that have a propagated mount which is in the
rootfs on daemon startup.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit e8307b868d)
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This allows a plugin to be upgraded without requiring to
uninstall/reinstall a plugin.
Since plugin resources (e.g. volumes) are tied to a plugin ID, this is
important to ensure resources aren't lost.
The plugin must be disabled while upgrading (errors out if enabled).
This does not add any convenience flags for automatically
disabling/re-enabling the plugin during before/after upgrade.
Since an upgrade may change requested permissions, the user is required
to accept permissions just like `docker plugin install`.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit 03c6949739)
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This fix tries to address the issue raised in 29291 where
the output of `--replicas` in `service create/update`:
```
--replicas uint Number of tasks (default none)
```
is misleading. User might incorrectly assume the number of replicas
would be `0` (`none`) by default, while the actual default is `1`.
The issue comes from the fact that some of the default values are
from daemon and it is not possible for client to find out the default
value.
In this case, it might be better to just simply not displaying `(default none)`.
This fix returns "" for `Uint64Opt` so that `(default none)` is hidden.
In addition to `--replicas`, this fix also changes
`--restart-delay`, `--restart-max-attempts`, `--stop-grace-period`,
`--health-interval`, `--health-timeout`, and `--restart-window`
in a similiar fashion.
New Output:
```
--health-interval duration Time between running the check (ns|us|ms|s|m|h)
--health-timeout duration Maximum time to allow one check to run (ns|us|ms|s|m|h)
...
--replicas uint Number of tasks
...
--restart-delay duration Delay between restart attempts (ns|us|ms|s|m|h)
--restart-max-attempts uint Maximum number of restarts before giving up
--restart-window duration Window used to evaluate the restart policy (ns|us|ms|s|m|h)
...
--stop-grace-period duration Time to wait before force killing a container (ns|us|ms|s|m|h)
```
The docs has been updated. Note the docs for help output of `service create/update`
is out of sync with the current master. This fix replace with the update-to-date
help output.
This fix fixes 29291.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
(cherry picked from commit acc93db32b)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
Signed-off-by: John Howard <jhoward@microsoft.com>
Working directory processing was handled differently for Hyper-V and Windows-Server containers, as annotated in the builder documentation (updated in this PR). For Hyper-V containers, the working directory set by WORKDIR was not created. This PR makes Hyper-V containers work the same as Windows Server containers (and the same as Linux).
Example (only applies to Hyper-V containers, so not reproducible under CI environment)
Dockerfile:
FROM microsoft/nanoserver
WORKDIR c:\installer
ENV GOROOT=c:\installer
ADD go.exe .
RUN go --help
Running on Windows Server 2016, using docker master without this change, but with daemon set to --exec-opt isolation=hyperv as it would be for Client operating systems.
PS E:\go\src\github.com\docker\docker> dockerd -g c:\control --exec-opt isolation=hyperv
time="2017-02-01T15:48:09.657286100-08:00" level=info msg="Windows default isolation mode: hyperv"
time="2017-02-01T15:48:09.662720900-08:00" level=info msg="[graphdriver] using prior storage driver: windowsfilter"
time="2017-02-01T15:48:10.011588000-08:00" level=info msg="Graph migration to content-addressability took 0.00 seconds"
time="2017-02-01T15:48:10.016655800-08:00" level=info msg="Loading containers: start."
time="2017-02-01T15:48:10.460820000-08:00" level=info msg="Loading containers: done."
time="2017-02-01T15:48:10.509859600-08:00" level=info msg="Daemon has completed initialization"
time="2017-02-01T15:48:10.509859600-08:00" level=info msg="Docker daemon" commit=3c64061 graphdriver=windowsfilter version=1.14.0-dev
First with no explicit isolation:
PS E:\docker\build\unifyworkdir> docker build --no-cache .
Sending build context to Docker daemon 10.1 MB
Step 1/5 : FROM microsoft/nanoserver
---> 89b8556cb9ca
Step 2/5 : WORKDIR c:\installer
---> 7e0f41d08204
Removing intermediate container 236c7802042a
Step 3/5 : ENV GOROOT c:\installer
---> Running in 8ea5237183c1
---> 394b70435261
Removing intermediate container 8ea5237183c1
Step 4/5 : ADD go.exe .
---> e47401a1745c
Removing intermediate container 88dcc28e74b1
Step 5/5 : RUN go --help
---> Running in efe90e1b6b8b
container efe90e1b6b8b76586abc5c1dc0e2797b75adc26517c48733d90651e767c8463b encountered an error during CreateProcess: failure in a Windows system call: The directory name is invalid. (0x10b) extra info: {"ApplicationName":"","CommandLine":"cmd /S /C go --help","User":"","WorkingDirectory":"C:\\installer","Environment":{"GOROOT":"c:\\installer"},"EmulateConsole":false,"CreateStdInPipe":true,"CreateStdOutPipe":true,"CreateStdErrPipe":true,"ConsoleSize":[0,0]}
PS E:\docker\build\unifyworkdir>
Then forcing process isolation:
PS E:\docker\build\unifyworkdir> docker build --isolation=process --no-cache .
Sending build context to Docker daemon 10.1 MB
Step 1/5 : FROM microsoft/nanoserver
---> 89b8556cb9ca
Step 2/5 : WORKDIR c:\installer
---> 350c955980c8
Removing intermediate container 8339c1e9250c
Step 3/5 : ENV GOROOT c:\installer
---> Running in bde511c5e3e0
---> b8820063b5b6
Removing intermediate container bde511c5e3e0
Step 4/5 : ADD go.exe .
---> e4ac32f8902b
Removing intermediate container d586e8492eda
Step 5/5 : RUN go --help
---> Running in 9e1aa235af5f
Cannot mkdir: C:\installer is not a directory
PS E:\docker\build\unifyworkdir>
Now compare the same results after this PR. Again, first with no explicit isolation (defaulting to Hyper-V containers as that's what the daemon it set to) - note it now succeeds 😄
PS E:\docker\build\unifyworkdir> docker build --no-cache .
Sending build context to Docker daemon 10.1 MB
Step 1/5 : FROM microsoft/nanoserver
---> 89b8556cb9ca
Step 2/5 : WORKDIR c:\installer
---> 4f319f301c69
Removing intermediate container 61b9c0b1ff6f
Step 3/5 : ENV GOROOT c:\installer
---> Running in c464a1d612d8
---> 96a26ab9a7b5
Removing intermediate container c464a1d612d8
Step 4/5 : ADD go.exe .
---> 0290d61faf57
Removing intermediate container dc5a085fffe3
Step 5/5 : RUN go --help
---> Running in 60bd56042ff8
Go is a tool for managing Go source code.
Usage:
go command [arguments]
The commands are:
build compile packages and dependencies
clean remove object files
doc show documentation for package or symbol
env print Go environment information
fix run go tool fix on packages
fmt run gofmt on package sources
generate generate Go files by processing source
get download and install packages and dependencies
install compile and install packages and dependencies
list list packages
run compile and run Go program
test test packages
tool run specified go tool
version print Go version
vet run go tool vet on packages
Use "go help [command]" for more information about a command.
Additional help topics:
c calling between Go and C
buildmode description of build modes
filetype file types
gopath GOPATH environment variable
environment environment variables
importpath import path syntax
packages description of package lists
testflag description of testing flags
testfunc description of testing functions
Use "go help [topic]" for more information about that topic.
The command 'cmd /S /C go --help' returned a non-zero code: 2
And the same with forcing process isolation. Also works 😄
PS E:\docker\build\unifyworkdir> docker build --isolation=process --no-cache .
Sending build context to Docker daemon 10.1 MB
Step 1/5 : FROM microsoft/nanoserver
---> 89b8556cb9ca
Step 2/5 : WORKDIR c:\installer
---> f423b9cc3e78
Removing intermediate container 41330c88893d
Step 3/5 : ENV GOROOT c:\installer
---> Running in 0b99a2d7bf19
---> e051144bf8ec
Removing intermediate container 0b99a2d7bf19
Step 4/5 : ADD go.exe .
---> 7072e32b7c37
Removing intermediate container a7a97aa37fd1
Step 5/5 : RUN go --help
---> Running in 7097438a54e5
Go is a tool for managing Go source code.
Usage:
go command [arguments]
The commands are:
build compile packages and dependencies
clean remove object files
doc show documentation for package or symbol
env print Go environment information
fix run go tool fix on packages
fmt run gofmt on package sources
generate generate Go files by processing source
get download and install packages and dependencies
install compile and install packages and dependencies
list list packages
run compile and run Go program
test test packages
tool run specified go tool
version print Go version
vet run go tool vet on packages
Use "go help [command]" for more information about a command.
Additional help topics:
c calling between Go and C
buildmode description of build modes
filetype file types
gopath GOPATH environment variable
environment environment variables
importpath import path syntax
packages description of package lists
testflag description of testing flags
testfunc description of testing functions
Use "go help [topic]" for more information about that topic.
The command 'cmd /S /C go --help' returned a non-zero code: 2
PS E:\docker\build\unifyworkdir>
(cherry picked from commit f42033ba94)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
as of Ubuntu Yakkety, dirmngr is now in a separate
package (see https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1634464)
this patch updates the install script to install
the dirmngr package if it's not installed.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit f5263c8074)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
This bumps RunC and libcontainer to fix a regression
in 1.13 that caused SELinux labels to not be
applied correctly.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Also provide stack trace output in daemon logs.
Signed-off-by: Tibor Vass <tibor@docker.com>
(cherry picked from commit 26d0bac895)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
Right now it redirects, so change it to the correct one.
Signed-off-by: Christopher Jones <tophj@linux.vnet.ibm.com>
(cherry picked from commit 7c763b360a)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
This fix cherry-pick SwarmKit update to 0af40501a9cc98cd3e9425d2e4246dd3eff5526e
for branch 1.13.x. The following has been added:
- [docker/swarmkit#1909]: raft: Disable address change detection
- [docker/swarmkit#1910]: Fix issue in service update of published ports in host mode
This fix fixes#30199 in docker.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
cherry pick #30545
These are arm variants with different argument ordering because of
register alignment requirements.
Signed-off-by: Justin Cormack <justin.cormack@docker.com>
The `DOCKER_HIDE_LEGACY_COMMANDS` environment
variable was added in a7c8bcac2b
but not documented.
This adds the variable to the documentation.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 2ef82fd237)
Signed-off-by: Victor Vieux <vieux@docker.com>
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
(cherry picked from commit 1cd5af59bf)
Signed-off-by: Victor Vieux <vieux@docker.com>
- When the node leaves the cluster, if any user run
container(s) is connected to the swarm network,
then daemon needs to detach the container(s) and
remove the network.
Signed-off-by: Alessandro Boch <aboch@docker.com>
(cherry picked from commit 3cedca5d53)
Signed-off-by: Victor Vieux <vieux@docker.com>
Using source, the following error is made:
invalid field in secret request: src
Signed-off-by: Michael Irwin <mikesir87@gmail.com>
(cherry picked from commit 9250117d58)
Signed-off-by: Victor Vieux <vieux@docker.com>
This patch adds a "src" alias for `--secret`
to be consistent with `--mount`.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 950658bbb6)
Signed-off-by: Victor Vieux <vieux@docker.com>
This fix tries to address the issue raised in 30242 where the `Scope`
field always changed to `swarm` in the ouput of `docker network ls/inspect`
when duplicate networks name exist.
The reason for the issue was that `buildNetworkResource()` use network name
(which may not be unique) to check for the scope.
This fix fixes the issue by always use network ID in `buildNetworkResource()`.
A test has been added. The test fails before the fix and passes after the fix.
This fix fixes 30242.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
(cherry picked from commit 05a831a775)
Signed-off-by: Victor Vieux <vieux@docker.com>
go 1.7.4 introduced official go ppc64le binaries, so use those
instead of using older versions of go and building from src.
Signed-off-by: Christopher Jones <tophj@linux.vnet.ibm.com>
(cherry picked from commit 62ab6809bd)
Signed-off-by: Victor Vieux <vieux@docker.com>
This fix tries to fix the issue in 30279 where `docker ps --format`
fails if `.Label` has args. For example:
```
docker ps --format '{{.ID}}\t{{.Names}}\t{{.Label "some.label"}}'
```
The reason for the failure is that during the preprocessing phase
to detect the existance of `.Size`, the `listOptionsProcessor`
does not has a method of `Label(name string) string`.
This results in the failure of
```
template: :1:24: executing "" at <.Label>: Label is not a method but has arguments
```
This fix fixes the issue by adding needed method of `Label(name string) string`.
This fix fixes 30279.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
(cherry picked from commit 2cd4ba1e56)
Signed-off-by: Victor Vieux <vieux@docker.com>
When a plugin has an activation error, it was not being checked in the
`waitActive` loop. This means it will just wait forever for a manifest
to be populated even though it may never come.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit f2d384fca6)
Signed-off-by: Victor Vieux <vieux@docker.com>
commit 56f77d5ade
added support for cpu-rt-period and cpu-rt-runtime,
but always initialized the cgroup path, even if not
used.
As a result, containers failed to start on a
read-only filesystem.
This patch only creates the cgroup path if
one of these options is set.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit f285d5b3e8)
Signed-off-by: Victor Vieux <vieux@docker.com>
Upon each container create I'm seeing these warning **every** time in the
daemon output:
```
WARN[0002] Your kernel does not support swap memory limit
WARN[0002] Your kernel does not support cgroup rt period
WARN[0002] Your kernel does not support cgroup rt runtime
```
Showing them for each container.create() fills up the logs and encourages
people to ignore the output being generated - which means its less likely
they'll see real issues when they happen. In short, I don't think we
need to show these warnings more than once, so let's only show these
warnings at daemon start-up time.
Signed-off-by: Doug Davis <dug@us.ibm.com>
(cherry picked from commit ff42a2eb41)
Signed-off-by: Victor Vieux <vieux@docker.com>
c54b717 caused a regression for pluginv1 on Windows, where extraneous
backslashes were added to BasePath of the plugin. For pluginv1 on windows,
BasePath() should return an empty string, since the plugin is fully aware
of the mount path. Also, unlike Linux where all paths are relative to "/",
Windows paths are dependent on system drives and mapped drives.
Fixes#30148
Signed-off-by: Anusha Ragunathan <anusha.ragunathan@docker.com>
(cherry picked from commit 0ef21eb0e3)
Signed-off-by: Victor Vieux <vieux@docker.com>
The top-level `docker inspect` command could return
an error if the nodes Swarm certificates were expired.
In situations where the user did not explicitly
ask for an object-type (`--type=foo`), we should
ignore these errors, and consider them equal to
"node is not a swarm manager".
This change makes `docker inspect` ignore these
errors if no type was specified.
As a further optimization, the "swarm status"
result is now stored in a variable, so that
other swarm-specific API calls can be skipped.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 66cf4cc7f7)
Signed-off-by: Victor Vieux <vieux@docker.com>
Instead of a timeout the context is cancelled on error to ensure
proper cleanup of the associated fifos' goroutines.
Signed-off-by: Kenfe-Mickael Laventure <mickael.laventure@gmail.com>
(cherry picked from commit c178700a04)
Signed-off-by: Victor Vieux <vieux@docker.com>
As noted by #30083, the new strict checking of mediatypes misses some
cases where earlier bugs caused nonstandard mediatypes to be stored in
manifests. Two of the known cases are text/html and application/json,
which were returned by certain registries and stored by earlier versions
of Docker. Add special cases for text/html and application/json.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
(cherry picked from commit a215e15cb1)
Signed-off-by: Victor Vieux <vieux@docker.com>
When Size was reverted to be equal to VirtualSize, the df command
formatter was not correctly updated to account for the change.
Signed-off-by: Kenfe-Mickael Laventure <mickael.laventure@gmail.com>
(cherry picked from commit dcc1b4baf6)
Signed-off-by: Victor Vieux <vieux@docker.com>
This is necessary for swarmkit to support cluster wide plugins, such as
globally scoped network plugins.
Signed-off-by: Anusha Ragunathan <anusha.ragunathan@docker.com>
This test checks to make sure both v1.12 and v1.13 client against v1.13 daemon get correct `Size` after the fix.
This test is related to 30027.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
(cherry picked from commit d9451f1c8c)
Signed-off-by: Victor Vieux <vieux@docker.com>
The prune PR changed the meaning of the file to mean "space on disk
only unique to this image", this PR revert this change.
Signed-off-by: Kenfe-Mickael Laventure <mickael.laventure@gmail.com>
(cherry picked from commit be20dc15af)
Signed-off-by: Victor Vieux <vieux@docker.com>
When storeLayer.Parent returns the parent layer, it needs to use the same logic as Get where it wraps in a describablyStoreLayer if the layer is describable. Otherwise, on Windows, this can result in pushing the foreign layers, which is not supposed to be allowed.
This fixes https://github.com/docker/docker/issues/30080.
Signed-off-by: Stefan J. Wernli <swernli@microsoft.com>
(cherry picked from commit d14b7212ad)
Signed-off-by: Victor Vieux <vieux@docker.com>
This reverts commit 105bc63295,
which (although correct), resulted in a backward incompatible
change.
We can re-implement this in future, after this changes
goes through a deprecation cycle
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
commit 9322636c89
temporarily switched to a fork of go-memdb, because
a pull request that was needed was not yet merged
upstream.
this pull request was merged, so we can un-fork
this dependency.
this change does not bump the dependency, and
only un-forks. bumping the dependency should
be done in a separate change, if needed.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 5f057f6350)
Signed-off-by: Victor Vieux <vieux@docker.com>
Vendor the latest official logrus release instead of a custom fork
(which now happens to be identical to the fork).
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
(cherry picked from commit 11df2db538)
Signed-off-by: Victor Vieux <vieux@docker.com>
- default network is only created if needed
- it's possible to override default network configuration
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
The base selinux policies on centos/rhel/oraclelinux have all been
updated in a way that conflicts with the policies we install with
`docker-engine-selinux`. This patch fixes these conflicts.
In addition, removes special cases for old/unsupported versions of
fedora in our selinux package, and change to use a single minimum
version for the selinux base policy package, as this is the minimum
version required to use our selinux policy package.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit ec9a05e5e2)
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
`plugins.GetAll()` was not locking the plugin map when checking if a
plugin exists, this can cause a race and potentially a panic if another
goroutine is trying to load a plugin into the map at the same time.
Also fixes a race during activation where a plugin inserts itself into
the plugin map but does not check if something else is already there.
This is already checked before trying to activate the plugin, however
the map lock is not held for this entire period, so other plugins may be
loaded during this time.
To fix, before inserting the plugin into the map, check if one with the
same name already exists and use that instead.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit 21fcbb39b7)
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Call daemon.Mount will increase the refcount of mounted path,
for those previous running containers, `Mount` call will make
the refcount to 2. see
https://github.com/docker/docker/blob/v1.13.0-rc4/daemon/graphdriver/counter.go#L38
```
if !m.check {
m.check = true
if c.checker.IsMounted(path) {
m.count++
}
}
m.count++
```
graphdrive could restore on reboot after #22541, call
daemon.Mount to resore the graphdriver is not necessary.
And call `daemon.Mount` on restorting will mount all the containers
mounted layer even if it was stop.
This fix call Mount and then Unmount to get `BaseFs`
Signed-off-by: Lei Jitang <leijitang@huawei.com>
This fix is a follow up to #29365. In #29365 a bug was fixed for
`docker exec -u user` after live restore by remounting.
However, #29365 will prevent containers from restored if mount failed.
In this fix, containers will be restored even if mount in that step failed.
Some functionalities might be missing (like `docker exec -u user`) but
at least it is possible to do certain operations like stop/restart/delete.
This fix is related to #29365.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
(cherry picked from commit 3003ae1d8b)
returned in "docker info". Currently info endpoint isnt using the
GetAllByCap, but relies on existing networks to get the plugin names.
This causes a basic issue when it comes to global network plugins which
swarm-mode relies on, wherein swarmkit will not be able to schedule the
network on the worker nodes due to the filtering logic.
In order to break this chicken & egg issue, we must start to use the
GetAllManagedPluginsByCap. We are unable to use GetAllByCap due to
various issues with Plugin-V1's lazy loading approach causing issues
especially during daemon restarts (which uses SystemInfo)
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Signed-off-by: Lei Jitang <leijitang@huawei.com>
(cherry picked from commit 737b5b1781)
Signed-off-by: Victor Vieux <vieux@docker.com>
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Signed-off-by: Victor Vieux <vieux@docker.com>
(cherry picked from commit bcead9282e)
Signed-off-by: Victor Vieux <vieux@docker.com>
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
When a plugin is activated, and then `plugins.Handle` is called to
register a new handler for a given plugin type, a deadlock occurs when
for anything which calls `waitActive`, including `Get`, and `GetAll`.
This happens because `Handle()` is setting `activated` to `false` to
ensure that plugin handlers are run on next activation.
Maybe these handlers should be called immediately for any plugins which
are already registered... but to preserve the existing behavior while
fixing the deadlock, track if handlers have been run on plugins and
reset when a new handler is registered.
The simplest way to reproduce the deadlock with Docker is to add a `-v
/foo` to the test container created for the external graphdriver tests.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit 2938dce794)
Signed-off-by: Victor Vieux <vieux@docker.com>
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
This fix tries to address the issue raised in 28581 and 28927
where it is not possible to create a secret from a file (only
through STDIN).
This fix add a flag `--file` to `docker secret create` so that
it is possible to create a secret from a file with:
```
docker secret create --file secret.in secret.name
```
or
```
echo TEST | docker secret create --file - secret.name
```
Related docs has been updated.
An integration test has been added to cover the changes.
This fix fixes 28581.
This fix is related to 28927.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
(cherry picked from commit c6f0b7f448)
Signed-off-by: Victor Vieux <vieux@docker.com>
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
In #28507 and #28885, `docker service/node ps -a` has been removed so that
information about slots are show up even without `-a` flag.
The output of `docker stack ps` reused the same output as `docker service/node ps`.
However, the `-a` was still there. It might make sense to remove `docker stack ps -a`
as well to bring consistency with `docker service/node ps`.
This fix is related to #28507, #28885, and #25983.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
(cherry picked from commit 9155e14e77)
Signed-off-by: Victor Vieux <vieux@docker.com>
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
In cases where there is high latency (ie, not-local network)
`waitExitOrRemoved` was not receiving events for short-lived containers.
This caused the client to hang while waiting for a notification that the
container has stopped.
This happens because `client.Events()` returns immediately and spins a
goroutine up to process events. The problem here is it returns before
the request to the events endpoint is even made.
Even without high-latency issues, there is no guarantee that the
goroutine is even scheduled by the time the function returns.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit 47585996bf)
Signed-off-by: Victor Vieux <vieux@docker.com>
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Signed-off-by: Daniel Nephin <dnephin@docker.com>
(cherry picked from commit abe32de6b4)
Signed-off-by: Victor Vieux <vieux@docker.com>
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
This fix tries to fix 29667 where image's `CMD` is modified
after `WORKDIR` in Dockerfile.
The value of `b.runConfig.Cmd` was modified in the processing
of `WORKDIR`, in order to fix 28902. However, the same
`b.runConfig.Cmd` is passed to `commit()`.
This fix restored the `b.runConfig.Cmd` before `commit()`
the image for `WORKDIR`.
A test has been added.
This fix fixes 29667.
This fix is related to 28902, 28909, 28514.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
(cherry picked from commit 0836023847)
Signed-off-by: Victor Vieux <vieux@docker.com>
`docker plugin enable` and `docker plugin disable` only
accept one plugin.
Signed-off-by: Harald Albers <github@albersweb.de>
(cherry picked from commit 390effdd11)
Signed-off-by: Victor Vieux <vieux@docker.com>
bolt k/v pairs are only valid for the life of a transaction.
This means the memory that the k/v pair is referencing may be invalid if
it is accessed outside of the transaction.
This can potentially cause a panic.
For reference: https://godoc.org/github.com/boltdb/bolt#hdr-Caveats
To fix this issue, unmarshal the stored data into volume meta before
closing the transaction.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit 4876a9047e)
Signed-off-by: Victor Vieux <vieux@docker.com>
Add missing flag and more descriptions in manpage.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
(cherry picked from commit 977fd43985)
Signed-off-by: Victor Vieux <vieux@docker.com>
The current GetAll handles both V2 and legacy plugins. Also due to the
nature of V1 plugins, it also loads them. This causes problems when
loading is not required. Hence adding an independent API that will
return only the plugins that are loaded using v2 mangaed plugins.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
The current validation only checked for the
number of elements in the volume-spec, however,
did not validate if the elements were empty.
Because of this, an empty volume-spec (""),
or volume spec only containing separators ("::")
would not be invalidated.
This adds a simple check for empty elements in
the volume-spec, and returns an error if
the spec is invalid.
A unit-test is also added to verify the behavior.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
the `convertVolumeToMount()` function did not take
anonymous volumes into account when converting
volume specifications to bind-mounts.
this resulted in the conversion to try to
look up an empty "source" volume, which
lead to an error;
undefined volume:
this patch distinguishes "anonymous"
volumes from bind-mounts and named-volumes,
and skips further processing if no source
is defined (i.e. the volume is "anonymous").
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Move plugins to shared distribution stack with images.
Create immutable plugin config that matches schema2 requirements.
Ensure data being pushed is same as pulled/created.
Store distribution artifacts in a blobstore.
Run init layer setup for every plugin start.
Fix breakouts from unsafe file accesses.
Add support for `docker plugin install --alias`
Uses normalized references for default names to avoid collisions when using default hosts/tags.
Some refactoring of the plugin manager to support the change, like removing the singleton manager and adding manager config struct.
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
Signed-off-by: Derek McGowan <derek@mcgstyle.net>
(cherry picked from commit 3d86b0c79b)
Move configurations into a single file.
Abstract download manager in pull config.
Add supports for schema2 only and schema2 type checking.
Add interface for providing push layers.
Abstract image store to generically handle configurations.
Signed-off-by: Derek McGowan <derek@mcgstyle.net>
(cherry picked from commit 3c7676a057)
Manifest builder allows setting the configuration type
for the manifest being build. Additionally the default
type has been renamed to reflect it is an image type.
Signed-off-by: Derek McGowan <derek@mcgstyle.net>
(cherry picked from commit 61ac7c4bf8)
When plugins have a positive refcount, they were not allowed to be
removed. However, plugins could still be disabled when volumes
referenced it and containers using them were running.
This change fixes that by enforcing plugin refcount during disable.
A "force" disable option is also added to ignore reference refcounting.
Signed-off-by: Anusha Ragunathan <anusha@docker.com>
(cherry picked from commit 8cb2229cd1)
This fix is a follow up for comment:
https://github.com/docker/docker/pull/29186/files#r91277345
While #29186 addresses the issue of `docker inspect <unknown object>`
on Windows, it actually makes `docker plugin inspect <unknown object>`
out `object not found` on Windows as well. This is actually misleading
as plugin is not supported on Windows.
This fix reverted the change in #29186 while at the same time,
checks `not supported` in `docker inspect <unknown object>` so that
- `docker plugin inspect <unknown object>` returns `not supported` on Windows
- `docker inspect <unknown object>` returns `not found` on Windows
This fix is related to #29186 and #29185.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
(cherry picked from commit 0b3c10ac4d)
This fix is a follow up to the comment:
https://github.com/docker/docker/pull/28717#discussion_r90040589
Currently, the collision checking is done at the last step `Add()` of
plugin creation. However, at this stage the context such as plugin
directories have already been creation. In case of name collision,
rollback is needed which could be expensive.
This fix performs the check at the beginning of CreateFromContext using
GetByName. In this way, collision fails fast and no context creation
or rollback is needed.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
(cherry picked from commit 52405a9b58)
Previously, it was comparing against the driver name passed in by the
caller. This could lead to subtle issues when using plugins, like
"plugin" vs. "plugin:latest".
Also, remove "conflict:" prefix to improve the error message.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
(cherry picked from commit a854cf262336e5625ec06e8e12e8ebc1500ce656)
Ensures all known volumes (known b/c they are persisted to disk) have
their volume drivers refcounted properly.
In testing this, I found an issue with `--live-restore` (required since
currently the provided volume plugin doesn't keep state on restart)
where restorted plugins did not have a plugin client loaded causing a
panic when trying to use the plugin.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit 6ef1060cd0)
Signed-off-by: Victor Vieux <vieux@docker.com>
Previously, it doesn't allow creating such a network:
e.g.
$ docker network inspect -f '{{.Id}}' ingress
84xh9knigj6zyt00u31e26nj3
$ docker network create 84
Error response from daemon: network with name 84 already exists
Fix#27866
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
(cherry picked from commit edfbc3b876)
Signed-off-by: Victor Vieux <vieux@docker.com>
the "docker swarm leave" command description
mentioned that the command can only be used
for workers, however, the command can also
be used for managers (using the `-f` / `--force`
option).
this patch removes the "(workers only)" part
of the command description.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit f89eee5d9d)
Signed-off-by: Victor Vieux <vieux@docker.com>
Also enables `PropagatedMount` for graphdrivers.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit 500210475f)
Signed-off-by: Victor Vieux <vieux@docker.com>
This fix tries to address the issue raised in 24352. Previously,
when `docker swarm update` has no flags, the output is
```
Swarm updated.
```
even though nothing was updated. This could be misleading for
users.
This fix tries to address the issue by adding a `PreRunE` function
in the command so that in case no flag is provided (`cmd.Flags().NFlag() == 0`),
the usage will be outputed instead.
An integration has been added to cover the changes.
This fix fixes 24352.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
(cherry picked from commit 5aa5a1cb00)
Signed-off-by: Victor Vieux <vieux@docker.com>
Fixes a case where removing the plugin from disk would
fail silently. Also moves pluginStore remove after we
remove from disk, so 'docker plugin ls' doesn't isn't
empty in case it errors out.
Signed-off-by: Christopher Jones <tophj@linux.vnet.ibm.com>
(cherry picked from commit fb11164c4f)
Signed-off-by: Victor Vieux <vieux@docker.com>
This fix tries to address the issue raised in 29342 where
`docker exec -u` after docker daemon restart returns an error:
```
unable to find user test: no matching entries in passwd file
```
The reason was that `container.BaseFS` is not present after restart.
This fix adds the `daemon.Mount` during the restore to bring up the
`container.BaseFS`.
An integration test has been added to cover the changes.
This fix fixes 29342.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
(cherry picked from commit 7feb2a17e4)
Signed-off-by: Victor Vieux <vieux@docker.com>
Implement notary-based digest lookup in the client when
DOCKER_CONTENT_TRUST=1.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
(cherry picked from commit d4d6f8c0d0)
Split these into cli/trust so that other commands can make use of them.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
(cherry picked from commit 4b8c79f25e)
This removes some very old vestigial code that really should have been
removed during the content addressability transition. It implements
something called "reference" but it behaves differently from the actual
reference package. This was only used by client-side content trust code,
and is relatively easy to extricate.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
(cherry picked from commit d91ed88365)
`--publish-add 8081:81 --publish-add 8082:82 --publish-rm 80
--publish-rm 81/tcp --publish-rm 82/tcp` would thus result in 81 and
82 to be published.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
In #29071, we made the tags the correct name for generating types,
at the expense of the menu in the documentation looking good.
ReDoc now has support for tag display names
( https://github.com/Rebilly/ReDoc/pull/152 ), so we can assign
a more human-friendly name to the menu items.
Signed-off-by: Ben Firshman <ben@firshman.co.uk>
(cherry picked from commit 0caa6c218c)
Signed-off-by: Victor Vieux <vieux@docker.com>
Adds 2 new methods to v2 plugin `Acquire` and `Release` which allow
refcounting directly at the plugin level instead of just the store.
Since a graphdriver is initialized exactly once, and is really managed
by a separate object, it didn't really seem right to call
`getter.Get()` to refcount graphdriver plugins.
On shutdown it was particularly weird where we'd either need to keep a
driver reference in daemon, or keep a reference to the pluggin getter in
the layer store, and even then still store extra details on if the
graphdriver is a plugin or not.
Instead the plugin proxy itself will handle calling the neccessary
refcounting methods directly on the plugin object.
Also adds a new interface in `plugingetter` to account for these new
functions which are not going to be implemented by v1 plugins.
Changes terms `plugingetter.CREATE` and `plugingetter.REMOVE` to
`ACQUIRE` and `RELEASE` respectively, which seems to be better
adjectives for what we're doing.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit f29bbd16f5)
Signed-off-by: Victor Vieux <vieux@docker.com>
Fixes an issue when starting the daemon with live-restore
where previously it was not set, plugins are not running.
Fixes an issue when starting the daemon with live-restore, the plugin
client (for interacting with the plugins HTTP interface) is not set,
causing a panic when the plugin is called.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit cb6633175c)
Signed-off-by: Victor Vieux <vieux@docker.com>
commit bbd2018ee1
changed the output format of `docker service ps`.
this patch updates the reference docs
to match the updated output format.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 5902fa3384)
Signed-off-by: Victor Vieux <vieux@docker.com>
When inspecting a container, `NetworkSettings` contains top-level
information about the default ("bridge") network;
`EndpointID`, `Gateway`, `GlobalIPv6Address`, `GlobalIPv6PrefixLen`,
`IPAddress`, `IPPrefixLen`, `IPv6Gateway`, and `MacAddress`.
These properties are deprecated in favor of per-network properties in
`NetworkSettings.Networks`. These properties were already "deprecated" in
docker 1.9, but kept around for backward compatibility.
Refer to [#17538](https://github.com/docker/docker/pull/17538) for further
information.
This officially deprecates these properties, and marks them
for removal in 1.16
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit ae6f09b29c)
Signed-off-by: Victor Vieux <vieux@docker.com>
Due to the test plugins being architecture specific, these
tests fail to start the plugin (even though they don't fail yet)
Temporary fix until we can build architecture specific test
plugins.
Signed-off-by: Christopher Jones <tophj@linux.vnet.ibm.com>
(cherry picked from commit ebff8c79a3)
Signed-off-by: Victor Vieux <vieux@docker.com>
In certain cases (unattended upgrades), system services can disable
loaded AppArmor profiles. However, since /etc being read-only is a
supported setup we cannot just write a copy of the profile to
/etc/apparmor.d.
Instead, dynamically load the docker-default AppArmor profile if a
container is started with that profile set. This code will short-cut if
the profile is already loaded.
Fixes: 2f7596aaef ("apparmor: do not save profile to /etc/apparmor.d")
Signed-off-by: Aleksa Sarai <asarai@suse.de>
(cherry picked from commit 567ef8e785)
Signed-off-by: Victor Vieux <vieux@docker.com>
This fix tries to fix the issue raised in 29044 where
the IPAM options is missing in swarm network mode
after the service is deployed. Before the service
is deployed, the IPAM options is available.
The reason for the issue is that, before service is
deployed, `network inspect` is querying the swarm and
obtained the correct information.
However, after service is deployed, swarm executor
does not pass the IPAM options to the backend (daemon).
Also after service is deployed, `network inspect` is
actually querying the local daemon for information.
At this time the network information with missing IPAM
options is returned.
This fix fixes the issue by updating the swarm network
allocator and swarm executor.
A separate PR for swarmkit will be opened.
An integration test has been added to cover the change.
This fix fixes 29044.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
(cherry picked from commit 4d958e99c1)
Signed-off-by: Victor Vieux <vieux@docker.com>
- Display the ID column
- Do not append the task ID in the name column
- (NEW): Truncate task IDs, unless --no-trunc is specified
Signed-off-by: Andrea Luzzardi <aluzzardi@gmail.com>
(cherry picked from commit bbd2018ee1)
Signed-off-by: Victor Vieux <vieux@docker.com>
This fix update swarmkit to b5f07ce49c66d2f5feee83998b23d4c905b78155
The following changes have been included:
- Fix missing IPAM options in swarm network mode (docker/swarmkit#1789)
The above PR is related to docker PR #29074 and docker issue #29044.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the issue raised in 29129 where
"--hostname" not working when running in "--net=host" for
`docker run`.
The fix fixes the issue by not resetting the `container.Config.Hostname`
if the `Hostname` has already been assigned through `--hostname`.
An integration test has been added to cover the changes.
This fix fixes 29129.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
(cherry picked from commit b0a7b0120f)
Signed-off-by: Victor Vieux <vieux@docker.com>
This reverts 26103. 26103 was trying to make it so that if someone did:
docker build --build-arg FOO .
and FOO wasn't set as an env var then it would pick-up FOO from the
Dockerfile's ARG cmd. However, it went too far and removed the ability
to specify a build arg w/o any value. Meaning it required the --build-arg
param to always be in the form "name=value", and not just "name".
This PR does the right fix - it allows just "name" and it'll grab the value
from the env vars if set. If "name" isn't set in the env then it still needs
to send "name" to the server so that a warning can be printed about an
unused --build-arg. And this is why buildArgs in the options is now a
*string instead of just a string - 'nil' == mentioned but no value.
Closes#29084
Signed-off-by: Doug Davis <dug@us.ibm.com>
(cherry picked from commit cdb8ea90b0)
Signed-off-by: Victor Vieux <vieux@docker.com>
The install script currently includes some
distros that we don't actually have packages
for.
For these distros, the script currently
performs step to install Docker from
the distro's repository.
This patch removes those distros from
the install script, because we have no
control over these packages, and cannot
provide support for them.
Installing docker anyway will give the
false impression that they installed
a package from our repository (but they
didn't), and that they need to contact
us for support.
It's better to tell people that we don't
install in that case, and refer them to
the installation documentation, or the
documentation of their distro.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 29b98b6ee6)
Signed-off-by: Victor Vieux <vieux@docker.com>
Legacy plugins expect host-relative paths (such as for Volume.Mount).
However, a containerized plugin cannot respond with a host-relative
path. Therefore, this commit modifies new volume plugins' paths in Mount
and List to prepend the container's rootfs path.
This introduces a new PropagatedMount field in the Plugin Config.
When it is set for volume plugins, RootfsPropagation is set to rshared
and the path specified by PropagatedMount is bind-mounted with rshared
prior to launching the container. This is so that the daemon code can
access the paths returned by the plugin from the host mount namespace.
Signed-off-by: Tibor Vass <tibor@docker.com>
(cherry picked from commit c54b717caf)
Signed-off-by: Victor Vieux <vieux@docker.com>
v2/Plugin struct had fields that were
- purely used by the manager.
- unsafely exposed without proper locking.
This change fixes this, by moving relevant fields to the manager as well
as making remaining fields as private and providing proper accessors for
them.
Signed-off-by: Anusha Ragunathan <anusha@docker.com>
(cherry picked from commit b35490a8ba)
Signed-off-by: Victor Vieux <vieux@docker.com>
It provides an ASLR-bypassing target with usable ROP gadgets.
Signed-off-by: Ian Campbell <ian.campbell@docker.com>
(cherry picked from commit 49dcce7ba0)
Signed-off-by: Victor Vieux <vieux@docker.com>
Distribution client change for class in resource
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
(cherry picked from commit d1f5e0f7a6)
Signed-off-by: Victor Vieux <vieux@docker.com>
This fix tries to address the issue raised on 29185 where
`docker inspect <unknown object>` on Windows will return:
```
Error response from daemon: plugins are not supported on this platform
```
The reason was that in case `--type` is not specified, `docker inspect`
will iterate through different types `container`, `image`, `network`,
`plugin` etc. The `plugin` object is the last type to check.
However, as `plugin` is not supported on Windows yet, the error message
is not very informative for `plugins are not supported on this platform`.
This fix tries to fix the issue by return a `not found` error on unsupported
platforms as well.
An integration test has been added to cover the changes for Windows/Linux.
This fix fixes 29185.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
(cherry picked from commit 88fcdb0a82)
Signed-off-by: Victor Vieux <vieux@docker.com>
Logging configuration was completely ignore when deploy a compose file
to swarm. This fixes it.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
(cherry picked from commit 806cc1e0f8)
Signed-off-by: Victor Vieux <vieux@docker.com>
This fix tries to address the issue in 28884 where
it is possible to mask the secret ID by name.
The reason was that searching a secret is based on name.
However, searching a secret should be done based on:
- Full ID
- Full Name
- Partial ID (prefix)
This fix addresses the issue by changing related implementation
in `getCliRequestedSecretIDs()`
An integration test has been added to cover the changes.
This fix fixes 28884
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
(cherry picked from commit 3638ca4d14)
Signed-off-by: Victor Vieux <vieux@docker.com>
This fix convert DanglingOnly in ImagesPruneConfig to Filters,
so that it is possible to maintain API compatibility in the future.
Several integration tests have been added to cover changes.
This fix is related to 28497.
A follow up to this PR will be done once this PR is merged.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
(cherry picked from commit a6be56b54e)
Signed-off-by: Victor Vieux <vieux@docker.com>
This reverts commit 3e1b539e8d.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
(cherry picked from commit 6e0666e622)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
Validation is still done by swarmkit on the service side.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
(cherry picked from commit ef39256dfb)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
This fix tries to address the proposal raised in 28946
to support plugins in `docker inspect`.
The command `docker inspect` already supports
"container", "image", "node", "network", "service", "volume", "task".
However, `--type plugin` is not supported yet at the moment.
This fix address this issue by adding the support of `--type plugin`
for `docker inspect`.
An additional integration test has been added to cover the changes.
This fix fixes 28946.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
(cherry picked from commit 90bb2cdb9f)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
This fix tries to address the enhancement proposed in 28708 to display
ID field for the output of `docker plugin ls`.
This fix add `ID` field to the output of `docker plugin ls`
Related docs has been updated.
This fix fixes 28708.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
(cherry picked from commit 8a226ed643)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
Fix issue where out-of-band deletions and then a `docker volume create`
on the same driver caused volume to not be re-created in the driver but
return as created since it was stored in the cache.
Previous fix only worked if the driver names did not match.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit d8ce4a6e10)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
This is required to make the type generation put things in the
correct directory, but unfortunately makes the names in the
documentation menu look a bit crap.
I think the best solution would be to add a `x-display-name`
extension to tags to determine how the tags show up in the menu,
rather than it depend on the name of the tag. I shall do this in
a follow-up PR - for now, let's fix the breakage.
Fixes#29045
Signed-off-by: Ben Firshman <ben@firshman.co.uk>
(cherry picked from commit 30a9249e15)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
This pins the version of go-swagger used, because
the results generated by different versions
can differ quite a bit (tested between 0.7.2 - 0.7.4),
and can cause CI / validation to fail.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit ba20c3e65e)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
the restart policy validation was moved from
the client to the daemon in 94e95e4711
As part of that change, retry-counts < 1
were marked as "invalid".
However, the default is 0 (unlimited), causing
docker run -d --restart=on-failure nginx
To fail.
This changes the validation to only invalidate
retry-counts < 0.
A test was added, and other tests renamed
to allow running just these tests :)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 9db5d649ae)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
This fix tries to address the issue raised in discussion of
PR 28735 where it was not possible to manage plugin based on
plugin ID. Previously it was not possible to invoke
`docker plugin inspect` with a plugin ID (or ID prefix).
This fix updates the implementation of `docker plugin inspect`
so that it is possbile to search based on a plugin name, or a
plugin ID. A short format of plugin ID (prefix) is also possible,
as long as there is no ambiguity.
Previously the check of `docker plugin inspect` was mostly done
on the client side. This could potentially cause inconsistency
between API and CMD. This fix move all the checks to daemon side
so that API and CMD will be consistent.
An integration test has been added to cover the changes.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
(cherry picked from commit 0ce6e070f7)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
- Consistent naming (plural, etc)
- Add section descriptions
- Add docs in swagger.yaml about how to maintain them
Signed-off-by: Ben Firshman <ben@firshman.co.uk>
(cherry picked from commit 2aea9ad56b)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
Jekyll automatically adds titles based on the title of the page,
so this was causing duplicate titles.
Also, made all the headings the correct level.
Signed-off-by: Ben Firshman <ben@firshman.co.uk>
(cherry picked from commit d9b109b807)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
This commit reverts 273eeb813c (#26825).
For the discussion so far, please refer to #28527.
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
(cherry picked from commit e6d9b7de64)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
This ensures that graphdriver plugins can properly cleanup on daemon
exit.
Also prevents errors during shutdown when it tries to send the plugin a
`Cleanup()` request but ultimately times out since it's already been
shutdown.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit 4b400ecc4d)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
When building a manifest during a push operation, all layers must have
an associated descriptor. If a layer is missing a descriptor, that leads
to a panic.
A break inside a switch in layerAlreadyExists meant to break from the
loop surrounding the switch, but instead breaks from the switch. This
causes the loop to continue, and can overwrite the descriptor with an
empty one, leading to the panic.
Also, fix layerAlreadyExists not to abort the push when a speculative
stat on a candidate layer digest fails with an error. This could happen
in situations like a potential cross-repository mount where the user
does not have permission to access the source repository.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
(cherry picked from commit e0702e9f37)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
Allows replacing of the default httpredir.debian.org in /etc/apt/sources.list
with a user-specified mirror. This will (hopefully) fix CI apt issues.
Signed-off-by: Christopher Jones <tophj@linux.vnet.ibm.com>
(cherry picked from commit 150a519a0b)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
If a swarm service is created using an image ID, it's useless to try to
pull this reference or resolve it to a manifest digest. Avoid doing this
when a fully qualified image ID is given.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
(cherry picked from commit 089842c4b4)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
This reverts commit 188d2fac57.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
(cherry picked from commit cee0fff9fe)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
This reverts commit 139fff2bf0.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
(cherry picked from commit eb55d03f3c)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
If the network is marked as external, don't use the namespace on
it. Otherwise, it's not found.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
(cherry picked from commit 6fff845409)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
Because .. `hardcore_hamilton` and `inspiring_murdock`
https://twitter.com/swiftonsecurity/status/801195049165799424
Also replacing adjectives that could be interpreted as
refering to body size, (mental) health, intoxication.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 169b4d92a1)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
Dump stack dumps to exec root instead of daemon root.
When no path is provided to the stack dumper, such is the case with
SIGQUIT, dump to stderr.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit 0bd720b28d)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
If, using the API, a user submits an init request with a spec that has a
name other than "default", the engine will rename the "default" cluster
object. Some parts of swarmkit depend on having a cluster object named
"default". Reject any specs that use other names.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
(cherry picked from commit 9dba9e3248)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
(cherry picked from commit eeac871946)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
Make sure current client code can talk for ImageList can still talk to
older daemon.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
(cherry picked from commit c6e31454ba)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
A plugin has an `ExitChan` channel which is used to signal the exit of
the plugin process. In a recent change, the initialization was
incorrectly moved to the daemon Shutdown path.
Fix this by initializing the channel during plugin enable.
Signed-off-by: Anusha Ragunathan <anusha@docker.com>
(cherry picked from commit 890a98ceed)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
Docker-DCO-1.1-Signed-off-by: William Henry <whenry@redhat.com> (github: ipbabble)
Signed-off-by: William Henry <whenry@redhat.com>
(cherry picked from commit 798c00a7ee)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
This fix tries to fix the issue raised in 28684:
1. Duplicate plugin create with the same name will override the old plugin reference
2. In case an error happens in the middle of the plugin creation, plugin directories
in `/var/lib/docker/plugins` are not cleaned up.
This fix update the plugin store so that `Add()` will return an error if a plugin
with the same name already exist.
This fix also will clean up the directory in `/var/lib/docker/plugins` in case
an error happens in the middle of the plugin creation.
This fix fixes 28684.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
(cherry picked from commit 662d456928)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
`docker stack config` command does not exists anymore, removing it
from the command reference documentation.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
(cherry picked from commit 3f98871a19)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
The error didn't hint at how to resolve it. Google auto-suggest
also implies that people have been Googling this error.
Signed-off-by: Ben Firshman <ben@firshman.co.uk>
(cherry picked from commit 70acb89fa2)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
Chosing LEGACY_VSYSCALL_NONE (over NATIVE or EMULATE) will mean that binaries
using eglibc <= 2.13 will not run (segfault).
Fixes#28705.
Signed-off-by: Ian Campbell <ian.campbell@docker.com>
(cherry picked from commit 163db04452)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
Currently the help output of `docker network ls --filter` is:
```
Options:
-f, --filter value Provide filter values (i.e. 'dangling=true') (default [])
...
```
This caused confusion as only the following filters are supported at the moment:
- `driver`
- `type`
- `name`
- `id`
- `label`
This fix update the help output of `docker network ls --filter` and `network_ls.md`.
The `dangling=true` description has been replace to:
```
Options:
-f, --filter filter Provide filter values (i.e. 'driver=bridge')
...
```
This fix fixes 28786.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
(cherry picked from commit 2510f254ee)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
This fix tries to address the issue raised in 28769 where
checkpoint name was not checked before passing to containerd.
As a result, it was possible to use a special checkpoint name
to get outside of the container's directory.
This fix add restriction `[a-zA-Z0-9][a-zA-Z0-9_.-]+` (`RestrictedNamePattern`).
This is the same as container name restriction.
This fix fixes 28769.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
(cherry picked from commit c90ec05175)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
Mainly adding requirements on Network or NotUserNamespace to make it pass.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
(cherry picked from commit eb5fe064cf)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
This updates secret inspect to support inspect by ID in addition to name
as well as inspecting multiple secrets. This also cleans up the
help text for consistency.
Signed-off-by: Evan Hazlett <ejhazlett@gmail.com>
(cherry picked from commit 70d2cefd51)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
Fedora 25 was released today, and the official
image will be available soon.
This removes the temporary override, so that
we can build using the official image.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 545a2f009e)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
Up to and including 673c5ee559
Signed-off-by: Ben Firshman <ben@firshman.co.uk>
(cherry picked from commit 44c50807c6)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
- Tidied up copy
- API version is now mandatory
- Links to previous API versions
Signed-off-by: Ben Firshman <ben@firshman.co.uk>
(cherry picked from commit c97f67dbab)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
See: https://github.com/docker/docker.github.io/pull/606
Also:
- Add missing redirects to API reference pages
- Remove v1.25 and 1.26, because they are being replaced with
swagger generated docs.
- Remove all other docs which aren't reference material, because
this can live in docker/docker.github.io
Signed-off-by: Ben Firshman <ben@firshman.co.uk>
(cherry picked from commit 993854f58f)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
Document and link to the concurrent uploads/downloads daemon option.
Signed-off-by: Jacob Tomlinson <jacob@tom.linson.uk>
(cherry picked from commit b303381a4d)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
In the plugin manifest, Capabilities has been moved to
Linux.Capabilities to avoid confusion with Interface.Types[i].Capability
A DeviceCreation boolean has also been added to the manifest. This could
be changed in the future to be specific to a major number.
Signed-off-by: Tibor Vass <tibor@docker.com>
(cherry picked from commit 9f239281b1)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
Instead of converting nicely typed service mounts into untyped `Binds`
when creating containers, use the new `Mounts` API which is a 1-1
mapping between service mounts and container mounts.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit 821aeb6a6f)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
This fixes services networks list to be ignored when loading.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
(cherry picked from commit 01b70a95c9)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
For previous versions of Docker, `--rm` was handled client side, as such
there was no support in the daemon for it.
Now it is handled daemon side, but we still need to handle the case of a
newer client talking to an older daemon.
Falls back to client-side removal when the daemon does not support it.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit f4bb8c51de)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
The "--no-trunc" option toggles between showing/hiding
digests.
This updates the reference to show this difference.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 90993640f0)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
Signed-off-by: Evan Hazlett <ejhazlett@gmail.com>
use secret store interface instead of embedded secret data into container
Signed-off-by: Evan Hazlett <ejhazlett@gmail.com>
(cherry picked from commit bebd472e40)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
A recent PR added `(ns|us|ms|s|m|h)` to the descriptions of some
duration options, but not all. Add it to the remaining options for
consistency.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
(cherry picked from commit 32b12a28fc)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
network is `nil` if the following case:
```
services:
foo:
image: nginx
networks:
mynetwork:
```
It's a valid compose so we should not panic.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
(cherry picked from commit 158388ef8d)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
If env var "DOCKER_API_VERSION" is specified by user, we'll set
`cli.manualOverride`, before this, this field is always true due to
wrong logic.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
(cherry picked from commit 4d54d30477)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
Adds section about the hub deprecating the v1 protocol.
Adds note about intent to disable by default and remove support.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
(cherry picked from commit c8f826f407)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
`docker stack deploy` now supports a composefile v3 format that have a
healthcheck.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
(cherry picked from commit 3bd64de7a9)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
In case, a container is restarting indefinitely running
"docker stats --no-stream <restarting_container>" is suspended.
To fix this, the daemon makes sure the container is either not
running or restarting if `--no-stream` is set to true and if so
returns an empty stats.
Should fix#27772.
Signed-off-by: Boaz Shuster <ripcurld.github@gmail.com>
(cherry picked from commit 786a95493d)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
Currently the plugin initialization is too late for a loaded v2 plugin
to be usable as a graph driver.
This moves the initialization up before we create the graph driver.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit 020b051dfb)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
Instead of not adding experimental routes at all, fail with an explicit
message if the daemon is not running in experimental mode.
Added the `router.Experimental` which does this automatically.
Signed-off-by: Andrea Luzzardi <aluzzardi@gmail.com>
(cherry picked from commit 3976a33c1a)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
… for healthcheck. It make the code a little cleaner and more
future/usage proof.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
(cherry picked from commit 5f81cf11f6)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
the service definition uses the format as defined
in http://man7.org/linux/man-pages/man5/hosts.5.html
(IP_address canonical_hostname [aliases...])
This format is the _reverse_ of the format used in
the container API.
Commit f32869d956
inadvertently used the incorrect order.
This fixes the order, and correctly sets it to;
IP-Address hostname
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit f1b9df9172)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
For some reason, `go vet` and `go fmt` validate does not capture
several issues.
The following was the output of `go vet`:
```
ubuntu@ubuntu:~/docker$ go vet ./... 2>&1 | grep -v ^vendor | grep -v '^exit status 1$'
cli/command/formatter/container_test.go:393: possible formatting directive in Log call
volume/volume_test.go:257: arg mp.RW for printf verb %s of wrong type: bool
```
The following was the output of `go fmt -s`:
```
ubuntu@ubuntu:~/docker$ gofmt -s -l . | grep -v ^vendor
cli/command/stack/list.go
daemon/commit.go
```
Fixed above issues with `go vet` and `go fmt -s`
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
(cherry picked from commit ace786e9d5)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
Modify the service update and create APIs to return optional warning
messages as part of the response. Populate these messages with an
informative reason when digest resolution fails.
This is a small API change, but significantly improves the UX. The user
can now get immediate feedback when they've specified a nonexistent
image or unreachable registry.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
(cherry picked from commit 948e60691e)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
When swarm-mode is disabled, we need to return an error indicating this.
406 was chosen for the "Not Acceptable" verbiage, but this code has
specific semantics in relation to the `Accept` header, which aren't
applicable here.
We now use a 503 for this case. While it is not a perfect match, it does
make it clear that the particular "service" (read: API endpoint) is not
available. The body of the message provides the user with enough
information to take action on it by enabling swarm-mode and ensuring the
service is available.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
(cherry picked from commit 1d90d76048)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
This fix is an attempt to address the issue raised in 28339. In
`docker ps`, the formatter needs to expose all fields of `types.Container`
to `preProcessor` so that template could be executed.
This direct exposing is unreliable and could cause issues as user may incorrectly
assume all fields in `types.Container` will be available for templating.
However, the purpose of `preProcessor` is to only find out if `.Size`
is defined (so that opts.size could be set accordingly).
This fix defines `preProcessor` as `map[string]bool` with a func `Size()`.
In this way, any unknown fields will be ignored.
This fix adds several test cases to the existing `TestBuildContainerListOptions`.
This fix fixes 28339.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
(cherry picked from commit 312cc7eebd)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
This fix fixes error messages for `--cpus` from daemon.
When `docker run` takes `--cpus`, it will translate into NanoCPUs
and pass the value to daemon. The `NanoCPU` is not visible to the user.
The error message generated from daemon used 'NanoCPU' which may cause
some confusion to the user.
This fix fixes this issue by returning the error in CPUs instead.
This fix fixes 28456.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
(cherry picked from commit d22ac2f3a0)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
During error cases, we dont cleanup correctly. This commit takes care
of removing the plugin, if there are errors after the pull passed. It
also shuts down the plugin, if there are errors after the plugin in the
enable path.
Signed-off-by: Anusha Ragunathan <anusha@docker.com>
(cherry picked from commit 1144f8f1d4)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
It doesn't make sense to use omitempty here. 0 is a meaningful value and
it's different from the default. If someone sets Parallelism to 0, we
want to show that Parallelism is 0, not hide the field.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
(cherry picked from commit d8b8b12994)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
This fix tries to fix the crash caused by `docker service inspect --pretty`,
by performing necessary nil pointer check.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
(cherry picked from commit b6857e91c1)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
Error code resolution is powered by string matching. Not the greatest
thing in the world and I hope no one is proud of this code, but it
works. However, because a map is used, the iteration order of the map is
random, such that if an error matches two of the snippets, it may return
a different error code depending on the seed of the hashmap. This change
converts it to use a slice instead.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
(cherry picked from commit 3484e02590)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
DEVPTS_MULTIPLE_INSTANCES is no longer an option, it is always set, so
do not check for this post 4.8.
Signed-off-by: Justin Cormack <justin.cormack@docker.com>
(cherry picked from commit 228ee16df3)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
Signed-off-by: Felipe Oliveira <felipeweb.programador@gmail.com>
(cherry picked from commit 271b1f2756)
Signed-off-by: Victor Vieux <victorvieux@gmail.com>
Cli initialization pings back to remote API and
creates a deadlock if socket is already being
listened by systemd.
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
All images in the default registry (AKA docker.io, index.docker.io, and
registry-1.docker.io) are available via the v2 protocol, so there's no
reason to use the v1 protocol. Disabling it prevents useless fallbacks.
Signed-off-by: Noah Treuhaft <noah.treuhaft@docker.com>
Daemon still does validation and errors out on incorrect options.
Fixes an issue where non-Linux clients attempting to pass tmpfs options
on `docker run` to a Linux daemon will incorrectly error out.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
It is not required to have version prefix for all the remote
APIs. Though there are still quite a few example requests
in api docs that does not have the version prefix.
This fix update the remote api docs to address this issue.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix updates docs for `docker info` for most recent changes.
It also made several chagnes:
1. Replace 0.12.0-dev to 0.13.0 for api docs v1.24.
2. Replace 0.13.0-dev to 0.13.0 for api docs v1.25
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Quite a few changes, as it seems like previous wrapping was done
manually, so it's all over the place.
As noted in #28424
Signed-off-by: Jonathan Boulle <jonathanboulle@gmail.com>
In 28186, `dns-options-add/rm` has been changed to `dns-option-add/rm`
in `docker service create/update`, for the purpose of consistency.
This fix updates bash completion to remove extra `s`.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
`StreamConfig` carries with it a dep on libcontainerd, which is used by
other projects, but libcontainerd doesn't compile on all platforms, so
move it to `github.com/docker/docker/container/stream`
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
change reading order from beginning at the end to beginning at a buffer start
added intergration tests for boundary cases
Removed whitespace
Signed-off-by: Shayne Wang <shaynexwang@gmail.com>
@ -5,9 +5,102 @@ information on the list of deprecated flags and APIs please have a look at
https://docs.docker.com/engine/deprecated/ where target removal dates can also
be found.
## 1.13.0 (2016-12-08)
## 17.03.0-ce (2017-03-01)
### Client
* Fix panic in `docker stats --format`
### Contrib
* Update various `bash` and `zsh` completion scripts [#30823](https://github.com/docker/docker/pull/30823), [#30945](https://github.com/docker/docker/pull/30945) and more...
2. Restart Docker. Verify that the Docker daemon starts with no errors.
3. Reinstall your plugins.
### Builder
+ Add capability to specify images used as a cache source on build. These images do not need to have local parent chain and can be pulled from other registries [#26839](https://github.com/docker/docker/pull/26839)
+ (experimental) Add option to squash image layers to the FROM image after successful builds [#22641](https://github.com/docker/docker/pull/22641)
* Fix dockerfile parser with empty line after escape [#24725](https://github.com/docker/docker/pull/24725)
@ -18,15 +111,20 @@ be found.
- Fix image layer inconsistencies when using the overlay storage driver [#27209](https://github.com/docker/docker/pull/27209)
* Unused build-args are now allowed. A warning is presented instead of an error and failed build [#27412](https://github.com/docker/docker/pull/27412)
- Fix builder cache issue on Windows [#27805](https://github.com/docker/docker/pull/27805)
+ Allow `USER` in builder on Windows [#28415](https://github.com/docker/docker/pull/28415)
+ Handle env case-insensitive on Windows [#28725](https://github.com/docker/docker/pull/28725)
### Contrib
+ Add support for building docker debs for Ubuntu Xenial on PPC64 [#23438](https://github.com/docker/docker/pull/23438)
+ Add support for building docker debs for Ubuntu Xenial on s390x [#26104](https://github.com/docker/docker/pull/26104)
+ Add support for building docker debs for Ubuntu 16.04 Xenial on PPC64LE [#23438](https://github.com/docker/docker/pull/23438)
+ Add support for building docker debs for Ubuntu 16.04 Xenial on s390x [#26104](https://github.com/docker/docker/pull/26104)
+ Add support for building docker debs for Ubuntu 16.10 Yakkety Yak on PPC64LE [#28046](https://github.com/docker/docker/pull/28046)
- Add RPM builder for VMWare Photon OS [#24116](https://github.com/docker/docker/pull/24116)
+ Add shell completions to tgz [#27735](https://github.com/docker/docker/pull/27735)
* Update the install script to allow using the mirror in China [#27005](https://github.com/docker/docker/pull/27005)
+ Add DEB builder for Ubuntu 16.10 Yakkety Yak [#27993](https://github.com/docker/docker/pull/27993)
+ Add RPM builder for Fedora 25 [#28222](https://github.com/docker/docker/pull/28222)
+ Add `make deb` support for aarch64 [#27625](https://github.com/docker/docker/pull/27625)
### Distribution
@ -52,11 +150,14 @@ be found.
+ Unix socket support for fluentd [#26088](https://github.com/docker/docker/pull/26088)
* Enable fluentd logging driver on Windows [#28189](https://github.com/docker/docker/pull/28189)
- Sanitize docker labels when used as journald field names [#23725](https://github.com/docker/docker/pull/23725)
- Fix an issue where `docker logs --tail` returned less lines than expected [#28203](https://github.com/docker/docker/pull/28203)
- Splunk Logging Driver: performance and reliability improvements [#26207](https://github.com/docker/docker/pull/26207)
- Splunk Logging Driver: configurable formats and skip for verifying connection [#25786](https://github.com/docker/docker/pull/25786)
### Networking
+ Add `--attachable` network support to enable `docker run` to work in swarm-mode overlay network [#25962](https://github.com/docker/docker/pull/25962)
+ Add support for host port PublishMode in services using the `--port` option in `docker service create` [#27917](https://github.com/docker/docker/pull/27917)
+ Add support for host port PublishMode in services using the `--publish` option in `docker service create` [#27917](https://github.com/docker/docker/pull/27917) and [#28943](https://github.com/docker/docker/pull/28943)
+ Add support for Windows server 2016 overlay network driver (requires upcoming ws2016 update) [#28182](https://github.com/docker/docker/pull/28182)
* Change the default `FORWARD` policy to `DROP` [#28257](https://github.com/docker/docker/pull/28257)
+ Add support for specifying static IP addresses for predefined network on windows [#22208](https://github.com/docker/docker/pull/22208)
+ Add a new `is-task` ps filter [#24411](https://github.com/docker/docker/pull/24411)
+ Add `--env-file` flag to `docker create service` [#24844](https://github.com/docker/docker/pull/24844)
+ Add `--env-file` flag to `docker service create` [#24844](https://github.com/docker/docker/pull/24844)
+ Add `--format` on `docker stats` [#24987](https://github.com/docker/docker/pull/24987)
+ Make `docker node ps` default to `self` in swarm node [#25214](https://github.com/docker/docker/pull/25214)
+ Add `--group` in `docker service create` [#25317](https://github.com/docker/docker/pull/25317)
+ Add `--no-trunc` to service/node/stack ps output [#25337(https://github.com/docker/docker/pull/25337)
+ Add `--no-trunc` to service/node/stack ps output [#25337](https://github.com/docker/docker/pull/25337)
+ Add Logs to `ContainerAttachOptions` so go clients can request to retrieve container logs as part of the attach process [#26718](https://github.com/docker/docker/pull/26718)
+ Allow client to talk to an older server [#27745](https://github.com/docker/docker/pull/27745)
* Inform user client-side that a container removal is in progress [#26074](https://github.com/docker/docker/pull/26074)
+ Add `Isolation` to the /info endpoint [#26255](https://github.com/docker/docker/pull/26255)
+ Add `userns` to the /info endpoint [#27840](https://github.com/docker/docker/pull/27840)
- Do not allow more than one mode be requested at once in the services endpoint [#26643](https://github.com/docker/docker/pull/26643)
+ Add `--mount` flag to `docker create` and `docker run` [#26825](https://github.com/docker/docker/pull/26825)[#28150](https://github.com/docker/docker/pull/28150)
+ Add capability to /containers/create API to specify mounts in a more granular and safer way [#22373](https://github.com/docker/docker/pull/22373)
+ Add `--format` flag to `network ls` and `volume ls` [#23475](https://github.com/docker/docker/pull/23475)
* Allow the top-level `docker inspect` command to inspect any kind of resource [#23614](https://github.com/docker/docker/pull/23614)
+ Add --cpus flag to control cpu resources for `docker run` and `docker create`, and add `NanoCPUs` to `HostConfig` [#27958](https://github.com/docker/docker/pull/27958)
- Allow unsetting the `--entrypoint` in `docker run` or `docker create` [#23718](https://github.com/docker/docker/pull/23718)
* Restructure CLI commands by adding `docker image` and `docker container` commands for more consistency [#26025](https://github.com/docker/docker/pull/26025)
- Remove `COMMAND` column from `service ls` output [#28029](https://github.com/docker/docker/pull/28029)
@ -132,7 +234,7 @@ be found.
- Fix a race condition between device deferred removal and resume device, when using the devicemapper graphdriver [#23497](https://github.com/docker/docker/pull/23497)
- Add `docker stats` support in Windows [#25737](https://github.com/docker/docker/pull/25737)
- Allow using `--pid=host` and `--net=host` when `--userns=host` [#25771](https://github.com/docker/docker/pull/25771)
+ Add support for templating service options (hostname, mounts, and environment variables) [#28025](https://github.com/docker/docker/pull/28025)
* Display the endpoint mode in the output of `docker service inspect --pretty` [#26906](https://github.com/docker/docker/pull/26906)
* Make `docker service ps` output more bearable by shortening service IDs in task names [#28088](https://github.com/docker/docker/pull/28088)
* `docker node ps` now defaults to the current node [#25214](https://github.com/docker/docker/pull/25214)
+ Add `-a`/`--all` flags to `docker service ps` and `docker node ps` to show all results [#25983](https://github.com/docker/docker/pull/25983)
* Make `docker node ps` default to the current node [#25214](https://github.com/docker/docker/pull/25214)
+ Add `--dns`, -`-dns-opt`, and `--dns-search` to service create. [#27567](https://github.com/docker/docker/pull/27567)
+ Add `--force` to `docker service update` [#27596](https://github.com/docker/docker/pull/27596)
+ Add `--health-*` and `--no-healthcheck` flags to `docker service create` and `docker service update` [#27369](https://github.com/docker/docker/pull/27369)
+ Add `-q` to `docker service ps` [#27654](https://github.com/docker/docker/pull/27654)
* Display number of global services in `docker service ls` [#27710](https://github.com/docker/docker/pull/27710)
- Remove `--name` flag from `docker service update`. This flag is only functional on `docker service create`, so was removed from the `update` command [#26988](https://github.com/docker/docker/pull/26988)
- Fix worker nodes failing to recover because of transient networking issues [#26646](https://github.com/docker/docker/issues/26646)
* Add support for health aware load balancing and DNS records [#27279](https://github.com/docker/docker/pull/27279)
* Add `--hostname` to `docker service create` [#27857](https://github.com/docker/docker/pull/27857)
- Add `--tty` flag to `docker service create`/`update` [#28076](https://github.com/docker/docker/pull/28076)
+ Add `--hostname` to `docker service create` [#27857](https://github.com/docker/docker/pull/27857)
+ Add `--host` to `docker service create`, and `--host-add`, `--host-rm` to `docker service update` [#28031](https://github.com/docker/docker/pull/28031)
+ Add `--tty` flag to `docker service create`/`update` [#28076](https://github.com/docker/docker/pull/28076)
* Autodetect, store, and expose node IP address as seen by the manager [#27910](https://github.com/docker/docker/pull/27910)
* Encryption at rest of manager keys and raft data [#27967](https://github.com/docker/docker/pull/27967)
+ Add `--update-max-failure-ratio`, `--update-monitor` and `--rollback` flags to `docker service update` [#26421](https://github.com/docker/docker/pull/26421)
- Fix an issue with address autodiscovery on `docker swarm init` running inside a container [#26457](https://github.com/docker/docker/pull/26457)
+ (experimental) Add `docker service logs` command to view logs for a service [#28089](https://github.com/docker/docker/pull/28089)
- Pin images by digest for `docker service create` and `update` [#28173](https://github.com/docker/docker/pull/28173)
- Add short (`-f`) flag for `docker node rm --force` and `docker swarm leave --force` [#28196](https://github.com/docker/docker/pull/28196)
+ Don't repull image if pinned by digest [#28265](https://github.com/docker/docker/pull/28265)
+ swarm-mode support for indows [#27838](https://github.com/docker/docker/pull/27838)
+ Pin images by digest for `docker service create` and `update` [#28173](https://github.com/docker/docker/pull/28173)
* Add short (`-f`) flag for `docker node rm --force` and `docker swarm leave --force` [#28196](https://github.com/docker/docker/pull/28196)
+ Add options to customize Raft snapshots (`--max-snapshots`, `--snapshot-interval`) [#27997](https://github.com/docker/docker/pull/27997)
- Don't repull image if pinned by digest [#28265](https://github.com/docker/docker/pull/28265)
+ Swarm-mode support for Windows [#27838](https://github.com/docker/docker/pull/27838)
+ Allow hostname to be updated on service [#28771](https://github.com/docker/docker/pull/28771)
+ Support v2 plugins [#29433](https://github.com/docker/docker/pull/29433)
+ Add content trust for services [#29469](https://github.com/docker/docker/pull/29469)
### Volume
+ Add support for labels on volumes [#25628](https://github.com/docker/docker/pull/21567)
+ Add support for labels on volumes [#21270](https://github.com/docker/docker/pull/21270)
+ Add support for filtering volumes by label [#25628](https://github.com/docker/docker/pull/25628)
* Add a `--force` flag in `docker volume rm` to forcefully purge the data of the volume that has already been deleted [#23436](https://github.com/docker/docker/pull/23436)
* Enhance `docker volume inspect` to show all options used when creating the volume [#26671](https://github.com/docker/docker/pull/26671)
@ -192,10 +300,236 @@ be found.
- Deprecate unversioned API endpoints [#28208](https://github.com/docker/docker/pull/28208)
- Remove Ubuntu 15.10 (Wily Werewolf) as supported platform. Ubuntu 15.10 is EOL, and no longer receives updates [#27042](https://github.com/docker/docker/pull/27042)
- Remove Fedora 22 as supported platform. Fedora 22 is EOL, and no longer receives updates [#27432](https://github.com/docker/docker/pull/27432)
- Remove Fedora 23 as supported platform. Fedora 23 is EOL, and no longer receives updates [#29455](https://github.com/docker/docker/pull/29455)
- Deprecate the `repo:shortid` syntax on `docker pull` [#27207](https://github.com/docker/docker/pull/27207)
- Deprecate backing filesystem without d_type for overlay/overlay2 storage drivers [#27433](https://github.com/docker/docker/pull/27433)
- Deprecate MAINTAINER in Dockerfile [#25466](https://github.com/docker/docker/pull/25466)
- Deprecated filter param for endpoint `/images/json` [#27872](https://github.com/docker/docker/pull/27872)
- Deprecate backing filesystem without `d_type` for overlay and overlay2 storage drivers [#27433](https://github.com/docker/docker/pull/27433)
- Deprecate `MAINTAINER` in Dockerfile [#25466](https://github.com/docker/docker/pull/25466)
- Deprecate `filter` param for endpoint `/images/json` [#27872](https://github.com/docker/docker/pull/27872)
default "bridge" network: failed to parse pool request
for address space "LocalDefault" pool " subpool ":
could not find an available, non-overlapping IPv6 address
pool among the defaults to assign to the network
```
To resolve this error, either remove the `--ipv6` flag (to preserve the same
behavior as in Docker 1.12.3 and earlier), or provide an IPv6 subnet as the
value of the `--fixed-cidr-v6` flag.
In a similar way, if you specify the `--ipv6` flag when creating a network
with the default IPAM driver, without providing an IPv6 `--subnet`, network
creation will fail with the following message:
```none
Error response from daemon: failed to parse pool request for address space
"LocalDefault" pool "" subpool "": could not find an
available, non-overlapping IPv6 address pool among
the defaults to assign to the network
```
To resolve this, either remove the `--ipv6` flag (to preserve the same behavior
as in Docker 1.12.3 and earlier), or provide an IPv6 subnet as the value of the
`--subnet` flag.
The network network creation will instead succeed if you use an external IPAM driver
which supports automatic allocation of IPv6 subnets.
### Runtime
- Fix race on sending stdin close event [#29424](https://github.com/docker/docker/pull/29424)
### Networking
- Fix panic in docker network ls when a network was created with `--ipv6` and no ipv6 `--subnet` in older docker versions [#29416](https://github.com/docker/docker/pull/29416)
### Contrib
- Fix compilation on Darwin [#29370](https://github.com/docker/docker/pull/29370)
## 1.12.4 (2016-12-12)
**IMPORTANT**: Docker 1.12 ships with an updated systemd unit file for rpm
based installs (which includes RHEL, Fedora, CentOS, and Oracle Linux 7). When
upgrading from an older version of docker, the upgrade process may not
automatically install the updated version of the unit file, or fail to start
the docker service if;
- the systemd unit file (`/usr/lib/systemd/system/docker.service`) contains local changes, or
- a systemd drop-in file is present, and contains `-H fd://` in the `ExecStart` directive
Starting the docker service will produce an error:
Failed to start docker.service: Unit docker.socket failed to load: No such file or directory.
or
no sockets found via socket activation: make sure the service was started by systemd.
To resolve this:
- Backup the current version of the unit file, and replace the file with the
[version that ships with docker 1.12](https://raw.githubusercontent.com/docker/docker/v1.12.0/contrib/init/systemd/docker.service.rpm)
- Remove the `Requires=docker.socket` directive from the `/usr/lib/systemd/system/docker.service` file if present
- Remove `-H fd://` from the `ExecStart` directive (both in the main unit file, and in any drop-in files present).
After making those changes, run `sudo systemctl daemon-reload`, and `sudo
systemctl restart docker` to reload changes and (re)start the docker daemon.
### Runtime
- Fix issue where volume metadata was not removed [#29083](https://github.com/docker/docker/pull/29083)
- Asynchronously close streams to prevent holding container lock [#29050](https://github.com/docker/docker/pull/29050)
- Fix selinux labels for newly created container volumes [#29050](https://github.com/docker/docker/pull/29050)
This directory contains code pertaining to the Docker API:
# Working on the Engine API
- Used by the docker client when communicating with the docker daemon
The Engine API is an HTTP API used by the command-line client to communicate with the daemon. It can also be used by third-party software to control the daemon.
- Used by third party tools wishing to interface with the docker daemon
It consists of various components in this repository:
- `api/swagger.yaml` A Swagger definition of the API.
- `api/types/` Types shared by both the client and server, representing various objects, options, responses, etc. Most are written manually, but some are automatically generated from the Swagger definition. See [#27919](https://github.com/docker/docker/issues/27919) for progress on this.
- `cli/` The command-line client.
- `client/` The Go client used by the command-line client. It can also be used by third-party Go programs.
- `daemon/` The daemon, which serves the API.
##Swagger definition
The API is defined by the [Swagger](http://swagger.io/specification/) definition in `api/swagger.yaml`. This definition can be used to:
1. To automatically generate documentation.
2. To automatically generate the Go server and client. (A work-in-progress.)
3. Provide a machine readable version of the API for introspecting what it can do, automatically generating clients for other languages, etc.
## Updating the API documentation
The API documentation is generated entirely from `api/swagger.yaml`. If you make updates to the API, you'll need to edit this file to represent the change in the documentation.
The file is split into two main sections:
- `definitions`, which defines re-usable objects used in requests and responses
- `paths`, which defines the API endpoints (and some inline objects which don't need to be reusable)
To make an edit, first look for the endpoint you want to edit under `paths`, then make the required edits. Endpoints may reference reusable objects with `$ref`, which can be found in the `definitions` section.
There is hopefully enough example material in the file for you to copy a similar pattern from elsewhere in the file (e.g. adding new fields or endpoints), but for the full reference, see the [Swagger specification](https://github.com/docker/docker/issues/27919)
`swagger.yaml` is validated by `hack/validate/swagger` to ensure it is a valid Swagger definition. This is useful for when you are making edits to ensure you are doing the right thing.
## Viewing the API documentation
When you make edits to `swagger.yaml`, you may want to check the generated API documentation to ensure it renders correctly.
All the documentation generation is done in the documentation repository, [docker/docker.github.io](https://github.com/docker/docker.github.io). The Swagger definition is vendored periodically into this repository, but you can manually copy over the Swagger definition to test changes.
Copy `api/swagger.yaml` in this repository to `engine/api/[VERSION_NUMBER]/swagger.yaml` in the documentation repository, overwriting what is already there. Then, run `docker-compose up` in the documentation repository and browse to [http://localhost:4000/engine/api/](http://localhost:4000/engine/api/) when it finishes rendering.
errExperimentalFeature=errors.New("This experimental feature is disabled by default. Start the Docker daemon with --experimental in order to enable it.")
)
// ExperimentalRoute defines an experimental API route that can be enabled or disabled.
typeExperimentalRouteinterface{
Route
Enable()
Disable()
}
// experimentalRoute defines an experimental API route that can be enabled or disabled.
