--------------------------
Setup:
* When upgrading from versions before v0.40, setup will now warn that ownCloud/Nextcloud data cannot be migrated rather than failing the installation.
Mail:
* An MTA-STS policy for incoming mail is now published (in DNS and over HTTPS) when the primary hostname and email address domain both have a signed TLS certificate installed, allowing senders to know that an encrypted connection should be enforced.
* The per-IP connection limit to the IMAP server has been doubled to allow more devices to connect at once, especially with multiple users behind a NAT.
DNS:
* autoconfig and autodiscover subdomains and CalDAV/CardDAV SRV records are no longer generated for domains that don't have user accounts since they are unnecessary.
* IPv6 addresses can now be specified for secondary DNS nameservers in the control panel.
TLS:
* TLS certificates are now provisioned in groups by parent domain to limit easy domain enumeration and make provisioning more resilient to errors for particular domains.
Control Panel:
* The control panel API is now fully documented at https://mailinabox.email/api-docs.html.
* User passwords can now have spaces.
* Status checks for automatic subdomains have been moved into the section for the parent domain.
* Typo fixed.
Web:
* The default web page served on fresh installations now adds the `noindex` meta tag.
* The HSTS header is revised to also be sent on non-success responses.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAtFiEEX0wOcxPM10RpOyrquSBB9MEL3YEFAl9t2AgPHGp0QG9jY2Ft
cy5pbmZvAAoJELkgQfTBC92BZNkH/1jIGoWTz0xlS+e+TeXpHoCp/7zYAvQq/a/y
vj9t1N1+bBg6Ywbd8UxyvOHwuL/UQU/5LTq6hk3gD+2ARfJUvDRbb047Xzlisg3N
LhNoVhVbsxqKP1X2ZjeIBq9DgzMavuB64Bwd5UNdceM0Addi8KuCDOMF+FNY2t8k
xytGjYdBi1/BG6SLBX+FAm5yrJghmkUJs2FnJjebSyyeV2HP3L1iBrk2N8UBd6PU
fVjde534lgygFZK/8yXJpY2olfLMYJv7CaOMxvaW6RpbMI8VeLwDLfRt5LcrQZqq
YXkuEnUI0eygbQYkeK/Vr1Vey6uQAWzIfbImEglHfvOXsZSYFXs=
=SJNM
-----END PGP SIGNATURE-----
Merge tag 'v0.50' of https://github.com/mail-in-a-box/mailinabox into master
v0.50 (September 25, 2020)
--------------------------
Setup:
* When upgrading from versions before v0.40, setup will now warn that ownCloud/Nextcloud data cannot be migrated rather than failing the installation.
Mail:
* An MTA-STS policy for incoming mail is now published (in DNS and over HTTPS) when the primary hostname and email address domain both have a signed TLS certificate installed, allowing senders to know that an encrypted connection should be enforced.
* The per-IP connection limit to the IMAP server has been doubled to allow more devices to connect at once, especially with multiple users behind a NAT.
DNS:
* autoconfig and autodiscover subdomains and CalDAV/CardDAV SRV records are no longer generated for domains that don't have user accounts since they are unnecessary.
* IPv6 addresses can now be specified for secondary DNS nameservers in the control panel.
TLS:
* TLS certificates are now provisioned in groups by parent domain to limit easy domain enumeration and make provisioning more resilient to errors for particular domains.
Control Panel:
* The control panel API is now fully documented at https://mailinabox.email/api-docs.html.
* User passwords can now have spaces.
* Status checks for automatic subdomains have been moved into the section for the parent domain.
* Typo fixed.
Web:
* The default web page served on fresh installations now adds the `noindex` meta tag.
* The HSTS header is revised to also be sent on non-success responses.
# gpg verification failed.
# Conflicts:
# .gitignore
# setup/bootstrap.sh
v0.50 (September 25, 2020)
--------------------------
Setup:
* When upgrading from versions before v0.40, setup will now warn that ownCloud/Nextcloud data cannot be migrated rather than failing the installation.
Mail:
* An MTA-STS policy for incoming mail is now published (in DNS and over HTTPS) when the primary hostname and email address domain both have a signed TLS certificate installed, allowing senders to know that an encrypted connection should be enforced.
* The per-IP connection limit to the IMAP server has been doubled to allow more devices to connect at once, especially with multiple users behind a NAT.
DNS:
* autoconfig and autodiscover subdomains and CalDAV/CardDAV SRV records are no longer generated for domains that don't have user accounts since they are unnecessary.
* IPv6 addresses can now be specified for secondary DNS nameservers in the control panel.
TLS:
* TLS certificates are now provisioned in groups by parent domain to limit easy domain enumeration and make provisioning more resilient to errors for particular domains.
Control Panel:
* The control panel API is now fully documented at https://mailinabox.email/api-docs.html.
* User passwords can now have spaces.
* Status checks for automatic subdomains have been moved into the section for the parent domain.
* Typo fixed.
Web:
* The default web page served on fresh installations now adds the `noindex` meta tag.
* The HSTS header is revised to also be sent on non-success responses.
* Only spawn a thread pool when strictly needed
For --check-primary-hostname, the pool is not used.
When exiting, the other processes are left alive and will hang.
* Acquire pools with the 'with' statement
This will make it so that the HSTS header is sent regardless of the request status code (until this point it would only be sent if "the response code equals 200, 201, 206, 301, 302, 303, 307, or 308." - according to thttp://nginx.org/en/docs/http/ngx_http_headers_module.html#add_header)
These subdomains/records are for automatic configuration of mail clients, but if there are no user accounts on a domain, there is no need to publish a DNS record, provision a TLS certificate, or create an nginx server config block.
When the management commands fail, they can print something to the standard error output.
The administrator would never notice, because it wouldn't be send to him with the usual emails.
Fixes#1763
* Create the mta_sts A/AAAA records even if there is no valid TLS certificate because we can't get a TLS certificate if we don't set up the domains.
* Make the policy id in the TXT record stable by using a hash of the policy file so that the DNS record doesn't change every day, which means no nightly notification and also it allows for longer caching by sending MTAs.
Folks didn't want certificates exposing all of the domains hosted by the server (although this can already be found on the internet).
Additionally, if one domain fails (usually because of a misconfiguration), it would be nice if not everything fails. So grouping them helps with that.
Fixes#690.
Security fixes:
* Fix missing brute force login protection for Roundcube logins.
Software updates:
* Upgraded Roundcube from 1.4.2 to 1.4.4.
* Upgraded Nextcloud from 17.0.2 to 17.0.6 (with Contacts from 3.1.6 to 3.3.0 and Calendar from 1.7.1 to v2.0.3)
* Upgraded Z-Push to 2.5.2.
System:
* Nightly backups now occur on a random minute in the 3am hour (in the system time zone). The minute is chosen during Mail-in-a-Box installation/upgrade and remains the same until the next upgrade.
* Fix for mail log statistics report on leap days.
* Fix Mozilla autoconfig useGlobalPreferredServer setting.
Web:
* Add a new hidden feature to set nginx alias in www/custom.yaml.
Setup:
* Improved error handling.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAtFiEEX0wOcxPM10RpOyrquSBB9MEL3YEFAl7AbCoPHGp0QG9jY2Ft
cy5pbmZvAAoJELkgQfTBC92BjbEIAIwmIpgNCT+age/SsUhDY8pjnFQWXBCl1nwa
RFN40Ev73DoBXUP+za4RE0eyCLIw5/laCwCjaESobiBTuc6boC1QU4abFUV5NfJQ
P3AnQ2qXkrtcmIQX42ge4AGsL3vMVRtjZWb+bvut2SmLB8BI5w/9XsQAS59lqSz0
kK6ShlDmFaToMgTQqwl0CW8a0vdjRca5Mq011xUZrvqTAm7ACQIvS6np4UYBGSNy
bU8O1xWMJb0HlO7f+bWCDYr1I+nRS1xXMW9pKsE08YFwcRLa+C42QkDXDuS/o/zj
EXBLGwYcB0DEu4wLLbih8xdbED2ZiMO2t6IHtbXPcoLtHo3Tv6I=
=RUkr
-----END PGP SIGNATURE-----
Merge tag 'v0.45' of https://github.com/mail-in-a-box/mailinabox
v0.45 (May 16, 2020)
Security fixes:
* Fix missing brute force login protection for Roundcube logins.
Software updates:
* Upgraded Roundcube from 1.4.2 to 1.4.4.
* Upgraded Nextcloud from 17.0.2 to 17.0.6 (with Contacts from 3.1.6 to 3.3.0 and Calendar from 1.7.1 to v2.0.3)
* Upgraded Z-Push to 2.5.2.
System:
* Nightly backups now occur on a random minute in the 3am hour (in the system time zone). The minute is chosen during Mail-in-a-Box installation/upgrade and remains the same until the next upgrade.
* Fix for mail log statistics report on leap days.
* Fix Mozilla autoconfig useGlobalPreferredServer setting.
Web:
* Add a new hidden feature to set nginx alias in www/custom.yaml.
Setup:
* Improved error handling.
- The MIAB version check regularly fails at 03:00, presumably because a
large portion of installations is checking mailinabox.email at the same
time.
- At installation time, the time of the nightly clock is configured to
run at a random minute after 03:00, but before 04:00.
- Users might expect the nightly tasks to be over at a certain time and
run their own custom tasks afterwards. This could thus interfere with
custom backup routines.
- This breaks reproducibility of the installation process.
- Users might also be surprised by the nightly task time changing after
updating MIAB.
with this nginx will keep on proxying requests and serve static content
instead of passing this responsibility to proxied server
Without this the one needs to run an additional server to server static
content on the proxied url
