The API's EndpointConfig struct has a MacAddress field that's used for
both the configured address, and the current address (which may be generated).
A configured address must be restored when a container is restarted, but a
generated address must not.
The previous attempt to differentiate between the two, without adding a field
to the API's EndpointConfig that would show up in 'inspect' output, was a
field in the daemon's version of EndpointSettings, MACOperational. It did
not work, MACOperational was set to true when a configured address was
used. So, while it ensured addresses were regenerated, it failed to preserve
a configured address.
So, this change removes that code, and adds DesiredMacAddress to the wrapped
version of EndpointSettings, where it is persisted but does not appear in
'inspect' results. Its value is copied from MacAddress (the API field) when
a container is created.
Signed-off-by: Rob Murray <rob.murray@docker.com>
Functional programming for the win! Add a utility function to map the
values of a slice, along with a curried variant, to tide us over until
equivalent functionality gets added to the standard library
(https://go.dev/issue/61898)
Signed-off-by: Cory Snider <csnider@mirantis.com>
We need to isolate the images that we are remapping to a userns, we
can't mix them with "normal" images. In the graph driver case this means
we create a new root directory where we store the images and everything
else, in the containerd case we can use a new namespace.
Signed-off-by: Djordje Lukic <djordje.lukic@docker.com>
These types were deprecated in v25.0, and moved to api/types/container;
This patch removes the aliases for;
- api/types.ResizeOptions (deprecated in 95b92b1f97)
- api/types.ContainerAttachOptions (deprecated in 30f09b4a1a)
- api/types.ContainerCommitOptions (deprecated in 9498d897ab)
- api/types.ContainerRemoveOptions (deprecated in 0f77875220)
- api/types.ContainerStartOptions (deprecated in 7bce33eb0f)
- api/types.ContainerListOptions (deprecated in 9670d9364d)
- api/types.ContainerLogsOptions (deprecated in ebef4efb88)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These types were deprecated in v25.0, and moved to api/types/swarm;
This patch removes the aliases for;
- api/types.ServiceUpdateResponse (deprecated in 5b3e6555a3)
- api/types.ServiceCreateResponse (deprecated in ec69501e94)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These types were deprecated in 48cacbca24
(v25.0), and moved to api/types/image.
This patch removes the aliases for;
- api/types.ImageDeleteResponseItem
- api/types.ImageSummary
- api/types.ImageMetadata
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These types were deprecated in b688af2226
(v25.0), and moved to api/types/checkpoint.
This patch removes the aliases for;
- api/types.CheckpointCreateOptions
- api/types.CheckpointListOptions
- api/types.CheckpointDeleteOptions
- api/types.Checkpoint
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These types were deprecated in c90229ed9a
(v25.0), and moved to api/types/system.
This patch removes the aliases for;
- api/types.Info
- api/types.Commit
- api/types.PluginsInfo
- api/types.NetworkAddressPool
- api/types.Runtime
- api/types.SecurityOpt
- api/types.KeyValue
- api/types.DecodeSecurityOptions
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
To prevent a circular import between api/types and api/types image,
the RequestPrivilegeFunc reference was not moved, but defined as
part of the PullOptions / PushOptions.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Commit 8b7af1d0f added some code to update the DNSNames of all
endpoints attached to a sandbox by loading a new instance of each
affected endpoints from the datastore through a call to
`Network.EndpointByID()`.
This method then calls `Network.getEndpointFromStore()`, that in
turn calls `store.GetObject()`, which then calls `cache.get()`,
which calls `o.CopyTo(kvObject)`. This effectively creates a fresh
new instance of an Endpoint. However, endpoints are already kept in
memory by Sandbox, meaning we now have two in-memory instances of
the same Endpoint.
As it turns out, libnetwork is built around the idea that no two objects
representing the same thing should leave in-memory, otherwise breaking
mutex locking and optimistic locking (as both instances will have a drifting
version tracking ID -- dbIndex in libnetwork parliance).
In this specific case, this bug materializes by container rename failing
when applied a second time for a given container. An integration test is
added to make sure this won't happen again.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
I made a mistake in the last commit - after resolving the IP from the
passed `addr` for CIFS it would still resolve the `device` part.
Apply only one name resolution
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Prior to 7a9b680a, the container short ID was added to the network
aliases only for custom networks. However, this logic wasn't preserved
in 6a2542d and now the cid is always added to the list of network
aliases.
This commit reintroduces the old logic.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
Commit 21e50b89c9 added a label on the buildkit
worker to advertise the host-gateway-ip. This option can be either set by the
user in the daemon config, or otherwise defaults to the gateway-ip.
If no value is set by the user, discovery of the gateway-ip happens when
initializing the network-controller (`NewDaemon`, `daemon.restore()`).
However d222bf097c changed how we handle the
daemon config. As a result, the `cli.Config` used when initializing the
builder only holds configuration information form the daemon config
(user-specified or defaults), but is not updated with information set
by `NewDaemon`.
This patch adds an accessor on the daemon to get the current daemon config.
An alternative could be to return the config by `NewDaemon` (which should
likely be a _copy_ of the config).
Before this patch:
docker buildx inspect default
Name: default
Driver: docker
Nodes:
Name: default
Endpoint: default
Status: running
Buildkit: v0.12.4+3b6880d2a00f
Platforms: linux/arm64, linux/amd64, linux/amd64/v2, linux/riscv64, linux/ppc64le, linux/s390x, linux/386, linux/mips64le, linux/mips64, linux/arm/v7, linux/arm/v6
Labels:
org.mobyproject.buildkit.worker.moby.host-gateway-ip: <nil>
After this patch:
docker buildx inspect default
Name: default
Driver: docker
Nodes:
Name: default
Endpoint: default
Status: running
Buildkit: v0.12.4+3b6880d2a00f
Platforms: linux/arm64, linux/amd64, linux/amd64/v2, linux/riscv64, linux/ppc64le, linux/s390x, linux/386, linux/mips64le, linux/mips64, linux/arm/v7, linux/arm/v6
Labels:
org.mobyproject.buildkit.worker.moby.host-gateway-ip: 172.18.0.1
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Commit 8ae94cafa5 added a DNS resolution
of the `device` part of the volume option.
The previous way to resolve the passed hostname was to use `addr`
option, which was handled by the same code path as the `nfs` mount type.
The issue is that `addr` is also an SMB module option handled by kernel
and passing a hostname as `addr` produces an invalid argument error.
To fix that, restore the old behavior to handle `addr` the same way as
before, and only perform the new DNS resolution of `device` if there is
no `addr` passed.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Update the version of compose used in CI to the latest version.
- full diff: docker/compose@v2.24.1...v2.24.2
- release notes: https://github.com/docker/compose/releases/tag/v2.24.2
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Also fixes some potentially unclosed file-handles,
inlines some variables, and use consts for fixed
values.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Also fixing a "defer in loop" warning, instead changing to use
sub-tests, and simplifying some code, using os.WriteFile() instead.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The names of extended attributes are not completely freeform. Attributes
are namespaced, and the kernel enforces (among other things) that only
attributes whose names are prefixed with a valid namespace are
permitted. The name of the attribute therefore needs to be known in
order to diagnose issues with lsetxattr. Include the name of the
extended attribute in the errors returned from the Lsetxattr and
Lgetxattr so users and us can more easily troubleshoot xattr-related
issues. Include the name in a separate rich-error field to provide code
handling the error enough information to determine whether or not the
failure can be ignored.
Signed-off-by: Cory Snider <csnider@mirantis.com>
The `GetImageOpts` struct is used for options to be passed to the backend,
and are not used in client code. This struct currently is intended for internal
use only.
This patch moves the `GetImageOpts` struct to the backend package to prevent
it being imported in the client, and to make it more clear that this is part
of internal APIs, and not public-facing.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The MAC address of a running container was stored in the same place as
the configured address for a container.
When starting a stopped container, a generated address was treated as a
configured address. If that generated address (based on an IPAM-assigned
IP address) had been reused, the containers ended up with duplicate MAC
addresses.
So, remember whether the MAC address was explicitly configured, and
clear it if not.
Signed-off-by: Rob Murray <rob.murray@docker.com>
With containerd snapshotters enabled `docker run` currently fails when
creating a container from an image that doesn't have the default host
platform without an explicit `--platform` selection:
```
$ docker run image:amd64
Unable to find image 'asdf:amd64' locally
docker: Error response from daemon: pull access denied for asdf, repository does not exist or may require 'docker login'.
See 'docker run --help'.
```
This is confusing and the graphdriver behavior is much better here,
because it runs whatever platform the image has, but prints a warning:
```
$ docker run image:amd64
WARNING: The requested image's platform (linux/amd64) does not match the detected host platform (linux/arm64/v8) and no specific platform was requested
```
This commits changes the containerd snapshotter behavior to be the same
as the graphdriver. This doesn't affect container creation when platform
is specified explicitly.
```
$ docker run --rm --platform linux/arm64 asdf:amd64
Unable to find image 'asdf:amd64' locally
docker: Error response from daemon: pull access denied for asdf, repository does not exist or may require 'docker login'.
See 'docker run --help'.
```
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
