The only use is in `builder/builder-next/adapters/snapshot.EnsureLayer()`,
which always calls the function with an _empty_ `oldTarDataPath`;
7082aecd54/builder/builder-next/adapters/snapshot/layer.go (L81)
When called with an empty `oldTarDataPath`, this function was an alias for
`checksumForGraphIDNoTarsplit`, so let's make it that.
Note that this code was added in 500e77bad0, as
part of the migration from "v1" images to "v2" (content-addressable) images.
Given that the remaining code lives in a "migration" file, possibly more code
can be removed.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `ExecBackend.ContainerKill()` function was called before removing a build-
container.
This function is backed by `daemon.ContainerKill()` which, if no signal is passed,
performed a `daemon.Kill()`, using `SIGKILL` as signal. However, the
`ExecBackend.ContainerRm()` (backed by `daemonContainerRm()`), which is called
after this, is executed with the `ForceRemove` option set, which calls
`daemon.cleanupContainer()` with `ForceRemove` set, which also results in
`daemon.Kill()` being called:
1a0c15abbb/daemon/delete.go (L84-L95)
This makes the `ExecBackend.ContainerKill()` redundant, so removing this from
the interface.
While looking at this code, one (possible) race-condition was found in
`daemon.cleanupContainer()`, where `daemon.Kill()` could return a `errdefs.Conflict`
if the container was already stopped. An extra check was added for this case to
prevent `daemon.cleanupContainer()` from terminating early.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Prevent cleanup from terminating early when failing to remove a container;
- continue trying to remove remaining containers
- ignore errors due to containers that were not found
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This was just a very thin wrapper for backend.ContainerRm(), and the
error it returned was not handled, so moving this code inline.
Moving it inline also allows differentiating the error message to
distinguish the "removing all intermediate containers" from "removing container"
(when cancelling a build).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The output var was used in a `defer`, but named `err` and shadowed in various
places. Rename the var to a more explicit name to make clear where it's used
and to prevent it being accidentally shadowed.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
release notes:
- NewSystemd handles UnitExists when starting units
- makefile fixes
- cgroups2: export memory max usage and swap max usage
- build(deps): bump github.com/cilium/ebpf from v0.9.1 to v0.11.0
- support psi
- feat: add Threads for cgroupv2
- Linux.Swap is defined as memory+swap combined, while in cgroup v2 swap is a separate value
- fix(): support re-enabling oom killer refs #307 by @kestrelcjx
full diff: https://github.com/containerd/cgroups/compare/v3.0.2...v3.0.3
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
To make the version format in the `moby-bin` consistent with the
version we use in the release pipeline.
```diff
Server: Docker Engine - Community
Engine:
- Version: v25.0.0
+ Version: 25.0.0
...
```
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
If the daemon is configured to use a mirror for the default (Docker Hub)
registry, the endpoint did not fall back to querying the upstream if the mirror
did not contain the given reference.
For pull-through registry-mirrors, this was not a problem, as in that case the
registry would forward the request, but for other mirrors, no fallback would
happen. This was inconsistent with how "pulling" images handled this situation;
when pulling images, both the mirror and upstream would be tried.
This patch brings the daemon-side lookup of image-manifests on-par with the
client-side lookup (the GET /distribution endpoint) as used in API 1.30 and
higher.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
If the daemon is configured to use a mirror for the default (Docker Hub)
registry, the endpoint did not fall back to querying the upstream if the mirror
did not contain the given reference.
If the daemon is configured to use a mirror for the default (Docker Hub)
registry, did not fall back to querying the upstream if the mirror did not
contain the given reference.
For pull-through registry-mirrors, this was not a problem, as in that case the
registry would forward the request, but for other mirrors, no fallback would
happen. This was inconsistent with how "pulling" images handled this situation;
when pulling images, both the mirror and upstream would be tried.
This problem was caused by the logic used in GetRepository, which had an
optimization to only return the first registry it was successfully able to
configure (and connect to), with the assumption that the mirror either contained
all images used, or to be configured as a pull-through mirror.
This patch:
- Introduces a GetRepositories method, which returns all candidates (both
mirror(s) and upstream).
- Updates the endpoint to try all
Before this patch:
# the daemon is configured to use a mirror for Docker Hub
cat /etc/docker/daemon.json
{ "registry-mirrors": ["http://localhost:5000"]}
# start the mirror (empty registry, not configured as pull-through mirror)
docker run -d --name registry -p 127.0.0.1:5000:5000 registry:2
# querying the endpoint fails, because the image-manifest is not found in the mirror:
curl -s --unix-socket /var/run/docker.sock http://localhost/v1.43/distribution/docker.io/library/hello-world:latest/json
{
"message": "manifest unknown: manifest unknown"
}
With this patch applied:
# the daemon is configured to use a mirror for Docker Hub
cat /etc/docker/daemon.json
{ "registry-mirrors": ["http://localhost:5000"]}
# start the mirror (empty registry, not configured as pull-through mirror)
docker run -d --name registry -p 127.0.0.1:5000:5000 registry:2
# querying the endpoint succeeds (manifest is fetched from the upstream Docker Hub registry):
curl -s --unix-socket /var/run/docker.sock http://localhost/v1.43/distribution/docker.io/library/hello-world:latest/json | jq .
{
"Descriptor": {
"mediaType": "application/vnd.oci.image.index.v1+json",
"digest": "sha256:1b9844d846ce3a6a6af7013e999a373112c3c0450aca49e155ae444526a2c45e",
"size": 3849
},
"Platforms": [
{
"architecture": "amd64",
"os": "linux"
}
]
}
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
A check was added to the bridge driver to detect when it was called to
create the default bridge nw whereas a stale default bridge already
existed. In such case, the bridge driver was deleting the stale network
before re-creating it. This check was introduced in docker/libnetwork@6b158eac6a
to fix an issue related to newly introduced live-restore.
However, since commit docker/docker@ecffb6d58c,
the daemon doesn't even try to create default networks if there're
active sandboxes (ie. due to live-restore).
Thus, now it's impossible for the default bridge network to be stale and
to exists when the driver's CreateNetwork() method is called. As such,
the check introduced in the first commit mentioned above is dead code
and can be safely removed.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
The Go 1.21.5 compiler has a bug: per-file language version override
directives do not take effect when instantiating generic functions which
have certain nontrivial type constraints. Consequently, a module-mode
project with Moby as a dependency may fail to compile when the compiler
incorrectly applies go1.16 semantics to the generic function call.
As the offending function is trivial and is only used in one place, work
around the issue by converting it to a concretely-typed function.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Copy the swagger / OpenAPI file to the documentation. This is the API
version used by the upcoming v25.0.0 release.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The following fields are never written and are now marked as deprecated:
- `HairpinMode`
- `LinkLocalIPv6Address`
- `LinkLocalIPv6PrefixLen`
- `SecondaryIPAddress`
- `SecondaryIPv6Addresses`
Co-authored-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
