Loggers that implement BufSize() (e.g. awslogs) uses the method to
tell Copier about the maximum log line length. However loggerWithCache
and RingBuffer hide the method by wrapping loggers.
As a result, Copier uses its default 16KB limit which breaks log
lines > 16kB even the destinations can handle that.
This change implements BufSize() on loggerWithCache and RingBuffer to
make sure these logger wrappes don't hide the method on the underlying
loggers.
Fixes#41794.
Signed-off-by: Kazuyoshi Kato <katokazu@amazon.com>
(cherry picked from commit bb11365e96)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Backport of 2db5676c6e to the swagger files
used in the documentation
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 240d0b37bb)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This PR was originally proposed by @phillc here: https://github.com/docker/engine/pull/456
Signed-off-by: FreddieOliveira <fredf_oliveira@ufu.br>
(cherry picked from commit 2db5676c6e)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This parameter was removed by kernel commit 4c145dce260137,
which made its way to kernel v5.3-rc1. Since that commit,
the functionality is built-in (i.e. it is available as long
as CONFIG_XFRM is on).
Make the check conditional.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit 06d9020fac)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These config options are removed by kernel commit f382fb0bcef4,
which made its way into kernel v5.0-rc1.
Make the check conditional.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit 18e0543587)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Kernel commit 2d1c498072de69e (which made its way into kernel v5.8-rc1)
removed CONFIG_MEMCG_SWAP_ENABLED Kconfig option, making swap accounting
always enabled (unless swapaccount=0 boot option is provided).
Make the check conditional.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit 070f9d9dd3)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
CONFIG_NF_NAT_NEEDED was removed in kernel commit 4806e975729f99c7,
which made its way into v5.2-rc1. The functionality is now under
NF_NAT which we already check for.
Make the check for NF_NAT_NEEDED conditional.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit 03da41152a)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
CONFIG_NF_NAT_IPV4 was removed in kernel commit 3bf195ae6037e310,
which made its way into v5.1-rc1. The functionality is now under
NF_NAT which we already check for.
Make the check for NF_NAT_IPV4 conditional.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit eeb53c1f22)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This fixes a panic when an invalid "device cgroup rule" is passed, resulting
in an "index out of range".
This bug was introduced in the original implementation in 1756af6faf,
but was not reproducible when using the CLI, because the same commit also added
client-side validation on the flag before making an API request. The following
example, uses an invalid rule (`c *:* rwm` - two spaces before the permissions);
```console
$ docker run --rm --network=host --device-cgroup-rule='c *:* rwm' busybox
invalid argument "c *:* rwm" for "--device-cgroup-rule" flag: invalid device cgroup format 'c *:* rwm'
```
Doing the same, but using the API results in a daemon panic when starting the container;
Create a container with an invalid device cgroup rule:
```console
curl -v \
--unix-socket /var/run/docker.sock \
"http://localhost/v1.41/containers/create?name=foobar" \
-H "Content-Type: application/json" \
-d '{"Image":"busybox:latest", "HostConfig":{"DeviceCgroupRules": ["c *:* rwm"]}}'
```
Start the container:
```console
curl -v \
--unix-socket /var/run/docker.sock \
-X POST \
"http://localhost/v1.41/containers/foobar/start"
```
Observe the daemon logs:
```
2021-01-22 12:53:03.313806 I | http: panic serving @: runtime error: index out of range [0] with length 0
goroutine 571 [running]:
net/http.(*conn).serve.func1(0xc000cb2d20)
/usr/local/go/src/net/http/server.go:1795 +0x13b
panic(0x2f32380, 0xc000aebfc0)
/usr/local/go/src/runtime/panic.go:679 +0x1b6
github.com/docker/docker/oci.AppendDevicePermissionsFromCgroupRules(0xc000175c00, 0x8, 0x8, 0xc0000bd380, 0x1, 0x4, 0x0, 0x0, 0xc0000e69c0, 0x0, ...)
/go/src/github.com/docker/docker/oci/oci.go:34 +0x64f
```
This patch:
- fixes the panic, allowing the daemon to return an error on container start
- adds a unit-test to validate various permutations
- adds a "todo" to verify the regular expression (and handling) of the "a" (all) value
We should also consider performing this validation when _creating_ the container,
so that an error is produced early.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 5cc1753f2c)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
While the field in the Go struct is named `NanoCPUs`, it has a JSON label to
use `NanoCpus`, which was added in the original pull request (not clear what
the reason was); 846baf1fd3
Some notes:
- Golang processes field names case-insensitive, so when *using* the API,
both cases should work, but when inspecting a container, the field is
returned as `NanoCpus`.
- This only affects Containers.Resources. The `Limits` and `Reservation`
for SwarmKit services and SwarmKit "nodes" do not override the name
for JSON, so have the canonical (`NanoCPUs`) casing.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 8e2343ffd4)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
While the field in the Go struct is named `NanoCPUs`, it has a JSON label to
use `NanoCpus`, which was added in the original pull request (not clear what
the reason was); 846baf1fd3
Some notes:
- Golang processes field names case-insensitive, so when *using* the API,
both cases should work, but when inspecting a container, the field is
returned as `NanoCpus`.
- This only affects Containers.Resources. The `Limits` and `Reservation`
for SwarmKit services and SwarmKit "nodes" do not override the name
for JSON, so have the canonical (`NanoCPUs`) casing.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 2bd46ed7e5)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
full diff: https://github.com/opencontainers/runc/compare/v1.0.0-rc92...v1.0.0-rc93
release notes: https://github.com/opencontainers/runc/releases/tag/v1.0.0-rc93
Release notes for runc v1.0.0-rc93
-------------------------------------------------
This is the last feature-rich RC release and we are in a feature-freeze until
1.0. 1.0.0~rc94 will be released in a few weeks with minimal bug fixes only,
and 1.0.0 will be released soon afterwards.
- runc's cgroupv2 support is no longer considered experimental. It is now
believed to be fully ready for production deployments. In addition, runc's
cgroup code has been improved:
- The systemd cgroup driver has been improved to be more resilient and
handle more systemd properties correctly.
- We now make use of openat2(2) when possible to improve the security of
cgroup operations (in future runc will be wholesale ported to libpathrs to
get this protection in all codepaths).
- runc's mountinfo parsing code has been reworked significantly, making
container startup times significantly faster and less wasteful in general.
- runc now has special handling for seccomp profiles to avoid making new
syscalls unusable for glibc. This is done by installing a custom prefix to
all seccomp filters which returns -ENOSYS for syscalls that are newer than
any syscall in the profile (meaning they have a larger syscall number).
This should not cause any regressions (because previously users would simply
get -EPERM rather than -ENOSYS, and the rule applied above is the most
conservative rule possible) but please report any regressions you find as a
result of this change -- in particular, programs which have special fallback
code that is only run in the case of -EPERM.
- runc now supports the following new runtime-spec features:
- The umask of a container can now be specified.
- The new Linux 5.9 capabilities (CAP_PERFMON, CAP_BPF, and
CAP_CHECKPOINT_RESTORE) are now supported.
- The "unified" cgroup configuration option, which allows users to explicitly
specify the limits based on the cgroup file names rather than abstracting
them through OCI configuration. This is currently limited in scope to
cgroupv2.
- Various rootless containers improvements:
- runc will no longer cause conflicts if a user specifies a custom device
which conflicts with a user-configured device -- the user device takes
precedence.
- runc no longer panics if /sys/fs/cgroup is missing in rootless mode.
- runc --root is now always treated as local to the current working directory.
- The --no-pivot-root hardening was improved to handle nested mounts properly
(please note that we still strongly recommend that users do not use
--no-pivot-root -- it is still an insecure option).
- A large number of code cleanliness and other various cleanups, including
fairly large changes to our tests and CI to make them all run more
efficiently.
For packagers the following changes have been made which will have impact on
your packaging of runc:
- The "selinux" and "apparmor" buildtags have been removed, and now all runc
builds will have SELinux and AppArmor support enabled. Note that "seccomp"
is still optional (though we very highly recommend you enable it).
- make install DESTDIR= now functions correctly.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 28e5a3c5a4)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
v0.13.1
- Refactor `ParsePortSpec` to handle IPv6 addresses, and improve validation
v0.13.0
- `rootlesskit --pidns`: fix propagating exit status
- Support cgroup2 evacuation, e.g., `systemd-run -p Delegate=yes --user -t rootlesskit --cgroupns --pidns --evacuate-cgroup2=evac --net=slirp4netns bash`
v0.12.0
- Port forwarding API now supports setting `ChildIP`
- The `vendor` directory is no longer included in this repo. Run `go mod vendor` if you need
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit e32ae1973a)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Fix docker0 subnet missmatch when running from docker in docker (dind)
Signed-off-by: Alexis Ries <ries.alexis@gmail.com>
(cherry picked from commit 96e103feb1)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Check if the `docker build` completed successfully before continuing.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit fa480403c7)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This currently doesn't make a difference, because load.FrozenImagesLinux()
currently loads all frozen images, not just the specified one, but in case
that is fixed/implemented at some point.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 26965fbfa0)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Thanks to Stefan Scherer for setting up the Jenkins nodes.
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
(cherry picked from commit c23b99f4db)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Use the image build from Dockerfile.simple to build docker binary failed
with not find <brtfs/ioctl.h>, we need to install libbtrfs-dev to fix this.
```
Building: bundles/dynbinary-daemon/dockerd-dev
GOOS="" GOARCH="" GOARM=""
.gopath/src/github.com/docker/docker/daemon/graphdriver/btrfs/btrfs.go:8:10: fatal error: btrfs/ioctl.h: No such file or directory
#include <btrfs/ioctl.h>
```
Signed-off-by: Lei Jitang <leijitang@outlook.com>
(cherry picked from commit dd7ee8ea3e)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
run docker-py integration tests of the latest release;
full diff: https://github.com/docker/docker-py/compare/4.3.0...4.4.1
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 14fb165085)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Commit f2f5106c92 added this test to verify loading
of images that were built with user-namespaces enabled.
However, because this test spins up a new daemon, not the daemon that's set up by
the test-suite's `TestMain()` (which loads the frozen images).
As a result, the `debian:bullseye` image was pulled from Docker Hub when running
the test;
Calling POST /v1.41/images/load?quiet=1
Applying tar in /go/src/github.com/docker/docker/bundles/test-integration/TestBuildUserNamespaceValidateCapabilitiesAreV2/d4d366b15997b/root/165536.165536/overlay2/3f7f9375197667acaf7bc810b34689c21f8fed9c52c6765c032497092ca023d6/diff" storage-driver=overlay
Applied tar sha256:845f0e5159140e9dbcad00c0326c2a506fbe375aa1c229c43f082867d283149c to 3f7f9375197667acaf7bc810b34689c21f8fed9c52c6765c032497092ca023d6, size: 5922359
Calling POST /v1.41/build?buildargs=null&cachefrom=null&cgroupparent=&cpuperiod=0&cpuquota=0&cpusetcpus=&cpusetmems=&cpushares=0&dockerfile=&labels=null&memory=0&memswap=0&networkmode=&rm=0&shmsize=0&t=capabilities%3A1.0&target=&ulimits=null&version=
Trying to pull debian from https://registry-1.docker.io v2
Fetching manifest from remote" digest="sha256:f169dbadc9021fc0b08e371d50a772809286a167f62a8b6ae86e4745878d283d" error="<nil>" remote="docker.io/library/debian:bullseye
Pulling ref from V2 registry: debian:bullseye
...
This patch updates `TestBuildUserNamespaceValidateCapabilitiesAreV2` to load the
frozen image. `StartWithBusybox` is also changed to `Start`, because the test
is not using the busybox image, so there's no need to load it.
In a followup, we should probably add some utilities to make this easier to set up
(and to allow passing the list frozen images that we want to load, without having
to "hard-code" the image name to load).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 46dfc31342)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Using `d.Kill()` with rootless mode causes the restarted daemon to not
be able to start containerd (it times out).
Originally this was SIGKILLing the daemon because we were hoping to not
have to manipulate on disk state, but since we need to anyway we can
shut it down normally.
I also tested this to ensure the test fails correctly without the fix
that the test was added to check for.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit e6591a9c7a)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
(cherry picked from commit 00225e220f)
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
The following warnings in `docker info` are now discarded,
because there is no action user can actually take.
On cgroup v1:
- "WARNING: No blkio weight support"
- "WARNING: No blkio weight_device support"
On cgroup v2:
- "WARNING: No kernel memory TCP limit support"
- "WARNING: No oom kill disable support"
`docker run` still prints warnings when the missing feature is being attempted to use.
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
(cherry picked from commit 8086443a44)
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
Fix#41803
Also attempt to mknod devices.
Mknodding devices are likely to fail, but still worth trying when
running with a seccomp user notification.
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
(cherry picked from commit d5d5cccb7e)
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
Now `systemctl --user stop docker` completes just with in 1 or 2 seconds.
Fix issue 41944 ("Docker rootless does not exit properly if containers are running")
See systemd.kill(5) https://www.freedesktop.org/software/systemd/man/systemd.kill.html
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
(cherry picked from commit 05566adf71)
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
