It will Tar up contents of child directory onto tmpfs if mounted over
This patch will use the new PreMount and PostMount hooks to "tar"
up the contents of the base image on top of tmpfs mount points.
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
libcontainer v0.0.4 introduces setting `/proc/self/oom_score_adj` to
better tune oom killing preferences for container process. This patch
simply integrates OomScoreAdj libcontainer's config option and adjust
the cli with this new option.
Signed-off-by: Antonio Murdaca <amurdaca@redhat.com>
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
This is a small configuration struct used in two scenarios:
1. To attach I/O pipes to a running containers.
2. To attach to execution processes inside running containers.
Although they are similar, keeping the struct in the same package
than exec and container can generate cycled dependencies if we
move any of them outside the daemon, like we want to do
with the container.
Signed-off-by: David Calavera <david.calavera@gmail.com>
- Optional "--shm-size=" was added to the sub-command(run, create,and build).
- The size of /dev/shm in the container can be changed
when container is made.
- Being able to specify is a numerical value that applies number,
b, k, m, and g.
- The default value is 64MB, when this option is not set.
- It deals with both native and lxc drivers.
Signed-off-by: NIWA Hideyuki <niwa.hiedyuki@jp.fujitsu.com>
So we don't print those <no value> in the client and we don't fail
executing inspect templates with API field names.
Make sure those fields are initialized as empty slices when
a container is loaded from disk and their values are nil.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Container has private network namespace can not to connect to host
and container with host network can not be disconnected from host.
Signed-off-by: Lei Jitang <leijitang@huawei.com>
The LXC driver was deprecated in Docker 1.8.
Following the deprecation rules, we can remove a deprecated feature
after two major releases. LXC won't be supported anymore starting on Docker 1.10.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Generate a hash chain involving the image configuration, layer digests,
and parent image hashes. Use the digests to compute IDs for each image
in a manifest, instead of using the remotely specified IDs.
To avoid breaking users' caches, check for images already in the graph
under old IDs, and avoid repulling an image if the version on disk under
the legacy ID ends up with the same digest that was computed from the
manifest for that image.
When a calculated ID already exists in the graph but can't be verified,
continue trying SHA256(digest) until a suitable ID is found.
"save" and "load" are not changed to use a similar scheme. "load" will
preserve the IDs present in the tar file.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
* Moving Network Remote APIs out of experimental
* --net can now accept user created networks using network drivers/plugins
* Removed the experimental services concept and --default-network option
* Neccessary backend changes to accomodate multiple networks per container
* Integration Tests
Signed-off-by: David Calavera <david.calavera@gmail.com>
Signed-off-by: Madhu Venugopal <madhu@docker.com>
- The build-time variables are passed as environment-context for command(s)
run as part of the RUN primitve. These variables are not persisted in environment of
intermediate and final images when passed as context for RUN. The build environment
is prepended to the intermediate continer's command string for aiding cache lookups.
It also helps with build traceability. But this also makes the feature less secure from
point of view of passing build time secrets.
- The build-time variables also get used to expand the symbols used in certain
Dockerfile primitves like ADD, COPY, USER etc, without an explicit prior definiton using a
ENV primitive. These variables get persisted in the intermediate and final images
whenever they are expanded.
- The build-time variables are only expanded or passed to the RUN primtive if they
are defined in Dockerfile using the ARG primitive or belong to list of built-in variables.
HTTP_PROXY, HTTPS_PROXY, http_proxy, https_proxy, FTP_PROXY and NO_PROXY are built-in
variables that needn't be explicitly defined in Dockerfile to use this feature.
Signed-off-by: Madhav Puri <madhav.puri@gmail.com>
Allow to set the signal to stop a container in `docker run`:
- Use `--stop-signal` with docker-run to set the default signal the container will use to exit.
Signed-off-by: David Calavera <david.calavera@gmail.com>
This fixes two problems:
1. docker run --device /dev/sda:rw ubuntu bash doesn't work
2. --device /dev/zero:/dev/noro:ro doesn't show clear error message,
but fail when writing to cgroup file.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
This reverts commit 40b71adee3.
Original commit (for which this is effectively a rebased version) is
72a500e9e5 and was provided by Lei Jitang
<leijitang@huawei.com>.
Signed-off-by: Tim Dettrick <t.dettrick@uq.edu.au>
It may happen that host system settings are changed while the daemon is running.
This will cause errors at libcontainer level when starting a container with a
particular hostConfig (e.g. hostConfig with memory swappiness but the memory
cgroup was umounted).
This patch adds an hostConfig check on container start to prevent the daemon
from even calling libcontainer with the wrong configuration as we're already
doing on container's creation).
Signed-off-by: Antonio Murdaca <runcom@linux.com>
(cherry picked from commit 0d2628cdf1)
This patch creates a new cli package that allows to combine both client
and daemon commands (there is only one daemon command: docker daemon).
The `-d` and `--daemon` top-level flags are deprecated and a special
message is added to prompt the user to use `docker daemon`.
Providing top-level daemon-specific flags for client commands result
in an error message prompting the user to use `docker daemon`.
This patch does not break any old but correct usages.
This also makes `-d` and `--daemon` flags, as well as the `daemon`
command illegal in client-only binaries.
Signed-off-by: Tibor Vass <tibor@docker.com>
As suggested in https://github.com/docker/docker/pull/14004/files#r34022527
The concern there is we can't differentiate whether user explicitly
asked for an invalid value of -1 or he did not specify anything.
I don't think this would be a problem, because:
- like all other default values like zero, we can't differentiate
user specify it or not, most of which, zeros are also invalid, so
default is default, we show these default values in help info,
so users would know if they set value as default, it'll be like
they set nothing.
- we can't do this kind of string check in REST api request, so
it'll make the behave different from docker command and RESTapi.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
Closes#14621
This one grew to be much more than I expected so here's the story... :-)
- when a bad port string (e.g. xxx80) is passed into container.create()
via the API it wasn't being checked until we tried to start the container.
- While starting the container we trid to parse 'xxx80' in nat.Int()
and would panic on the strconv.ParseUint(). We should (almost) never panic.
- In trying to remove the panic I decided to make it so that we, instead,
checked the string during the NewPort() constructor. This means that
I had to change all casts from 'string' to 'Port' to use NewPort() instead.
Which is a good thing anyway, people shouldn't assume they know the
internal format of types like that, in general.
- This meant I had to go and add error checks on all calls to NewPort().
To avoid changing the testcases too much I create newPortNoError() **JUST**
for the testcase uses where we know the port string is ok.
- After all of that I then went back and added a check during container.create()
to check the port string so we'll report the error as soon as we get the
data.
- If, somehow, the bad string does get into the metadata we will generate
an error during container.start() but I can't test for that because
the container.create() catches it now. But I did add a testcase for that.
Signed-off-by: Doug Davis <dug@us.ibm.com>
- Refactor opts.ValidatePath and add an opts.ValidateDevice
ValidePath will now accept : containerPath:mode, hostPath:containerPath:mode
and hostPath:containerPath.
ValidateDevice will have the same behavior as current.
- Refactor opts.ValidateEnv, opts.ParseEnvFile
Environment variables will now be validated with the following
definition :
> Environment variables set by the user must have a name consisting
> solely of alphabetics, numerics, and underscores - the first of
> which must not be numeric.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Memory swappiness option takes 0-100, and helps to tune swappiness
behavior per container.
For example, When a lower value of swappiness is chosen
the container will see minimum major faults. When no value is
specified for memory-swappiness in docker UI, it is inherited from
parent cgroup. (generally 60 unless it is changed).
Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
There is no reason to error out or not do what the user expects when -i
is specified on the cli. We should always attach to the stdin of the
container in this situation.
Closes#14390
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
By convention /pkg is safe to use from outside the docker tree, for example
if you're building a docker orchestrator.
/nat currently doesn't have any dependencies outside of /pkg, so it seems
reasonable to move it there.
This rename was performed with:
```
gomvpkg -vcs_mv_cmd="git mv {{.Src}} {{.Dst}}" \
-from github.com/docker/docker/nat \
-to github.com/docker/docker/pkg/nat
```
Signed-off-by: Peter Waller <p@pwaller.net>
This commit makes use of the CNM model supported by LibNetwork and
provides an ability to let a container to publish a specified service.
Behind the scenes, if a service with the given name doesnt exist, it is
automatically created on appropriate network and attach the container.
Signed-off-by: Alessandro Boch <aboch@docker.com>
Signed-off-by: Madhu Venugopal <madhu@docker.com>
This commit also brings in the ability to specify a default network and its
corresponding driver as daemon flags. This helps in existing clients to
make use of newer networking features provided by libnetwork.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Labels are metadata that apply to a particular resource: image,
container, maybe volumes and networks in the future. We shouldn't have
containers inherit from its image labels: they are not the same obejcts,
and labels cannot be interpreted in the way.
It remains possible to apply metadata to an image using the LABEL
Dockerfile instruction, to query them using `docker inspect <img>`, or
to filter images on them using `docker images --filter <key>=<value>`.
Fixes#13770.
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
This patch is extending the qualifiers on the -v command to allow
an admin to tell the system to relabel, content. There might be a
need for something similar for changing the DAC Permissions.
Signed-off-by: Jessica Frazelle <princess@docker.com>
Signed by all authors:
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
Signed-off-by: David Calavera <david.calavera@gmail.com>
Signed-off-by: Jeff Lindsay <progrium@gmail.com>
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
Signed-off-by: Luke Marsden <luke@clusterhq.com>
Signed-off-by: David Calavera <david.calavera@gmail.com>
- Updated Dockerfile to satisfy libnetwork GOPATH requirements.
- Reworked daemon to allocate network resources using libnetwork.
- Reworked remove link code to also update network resources in libnetwork.
- Adjusted the exec driver command population to reflect libnetwork design.
- Adjusted the exec driver create command steps.
- Updated a few test cases to reflect the change in design.
- Removed the dns setup code from docker as resolv.conf is entirely managed
in libnetwork.
- Integrated with lxc exec driver.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
When RUN returns with a non-zero return code it prints the command
that was executed as a Go []string:
```
INFO[0000] The command &{[/bin/sh -c noop a1 a2]} returned a non-zero code: 127
```
instead it should look like this:
```
INFO[0000] The command "/bin/sh -c noop a1 a2" returned a non-zero code: 127
```
Signed-off-by: Doug Davis <dug@us.ibm.com>
ParseRestartPolicy is useful function for third party go programs to use
so that they can parse the restart policy in the same way that Docker
does
Signed-off-by: Darren Shepherd <darren@rancher.com>
Adds more documentation for labels and adds the label instruction to the
man-pages.
Also included is a document called "Labels - custom meta-data in Docker"
in the user-guide, this is still a work-in-progress I started to describe
the "namespaces" conventions, an example on storing structured data.
I ran a bit "out of steam" (writers block?) on that document, but kept
it in (for now), in case it still ends up useful.
The Remote API documentation changes will need to be moved to the
docker_remote_api_v1.18.md document when rebasing the whole PR.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Darren Shepherd <darren@rancher.com>
Save "LABEL" field in Dockerfile into image content.
This will allow a user to save user data into an image, which
can later be retrieved using:
docker inspect IMAGEID
I have copied this from the "Comment" handling in docker images.
We want to be able to add Name/Value data to an image to describe the image,
and then be able to use other tools to look at this data, to be able to do
security checks based on this data.
We are thinking about adding version names,
Perhaps listing the content of the dockerfile.
Descriptions of where the code came from etc.
This LABEL field should also be allowed to be specified in the
docker import --change LABEL:Name=Value
docker commit --change LABEL:Name=Value
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
Cgroup resources are host dependent, they should be in hostConfig.
For backward compatibility, we just copy it to hostConfig, and leave it in
Config for now, so there is no regressions, but the right way to use this
throught json is to put it in HostConfig, like:
{
"Hostname": "",
...
"HostConfig": {
"CpuShares": 512,
"Memory": 314572800,
...
}
}
As we will add CpusetMems, CpusetCpus is definitely a better name, but some
users are already using Cpuset in their http APIs, we also make it compatible.
The main idea is keep using Cpuset in Config Struct, and make it has the same
value as CpusetCpus, but not always, some scenarios:
- Users use --cpuset in docker command, it can setup cpuset.cpus and can
get Cpuset field from docker inspect or other http API which will get
config info.
- Users use --cpuset-cpus in docker command, ditto.
- Users use Cpuset field in their http APIs, ditto.
- Users use CpusetCpus field in their http APIs, they won't get Cpuset field
in Config info, because by then, they should already know what happens
to Cpuset.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
