- full diff: https://github.com/actions/setup-go/compare/v3.5.0...v5.0.0
v5
In scope of this release, we change Nodejs runtime from node16 to node20.
Moreover, we update some dependencies to the latest versions.
Besides, this release contains such changes as:
- Fix hosted tool cache usage on windows
- Improve documentation regarding dependencies caching
V4
The V4 edition of the action offers:
- Enabled caching by default
- The action will try to enable caching unless the cache input is explicitly
set to false.
Please see "Caching dependency files and build outputs" for more information:
https://github.com/actions/setup-go#caching-dependency-files-and-build-outputs
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit e27a785f43)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The double quotes inside a single quoted string don't need to be
escaped.
Looks like different Powershell versions are treating this differently
and it started failing unexpectedly without any changes on our side.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
(cherry picked from commit ecb217cf69)
Previously this was done indirectly - the `compare` function didn't
check the `ArgsEscaped`.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
(cherry picked from commit 96d461d27e)
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Make sure the cache candidate platform matches the requested.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
(cherry picked from commit 877ebbe038)
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Restrict cache candidates only to images that were built locally.
This doesn't affect builds using `--cache-from`.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
(cherry picked from commit 96ac22768a)
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Store additional image property which makes it possible to distinguish
if image was built locally.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
(cherry picked from commit c6156dc51b)
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Add checks for some image config fields that were missing.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
(cherry picked from commit 537348763f)
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Turn subsequent `Close` calls into a no-op and produce a warning with an
optional stack trace (if debug mode is enabled).
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
(cherry picked from commit 585d74bad1)
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Commit 8b7af1d0f added some code to update the DNSNames of all
endpoints attached to a sandbox by loading a new instance of each
affected endpoints from the datastore through a call to
`Network.EndpointByID()`.
This method then calls `Network.getEndpointFromStore()`, that in
turn calls `store.GetObject()`, which then calls `cache.get()`,
which calls `o.CopyTo(kvObject)`. This effectively creates a fresh
new instance of an Endpoint. However, endpoints are already kept in
memory by Sandbox, meaning we now have two in-memory instances of
the same Endpoint.
As it turns out, libnetwork is built around the idea that no two objects
representing the same thing should leave in-memory, otherwise breaking
mutex locking and optimistic locking (as both instances will have a drifting
version tracking ID -- dbIndex in libnetwork parliance).
In this specific case, this bug materializes by container rename failing
when applied a second time for a given container. An integration test is
added to make sure this won't happen again.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
(cherry picked from commit 80c44b4b2e)
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
Unescapes the URL to avoid passing an URL encoded address to the kernel.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
(cherry picked from commit 250886741b)
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
(cherry picked from commit f4beb130b0)
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
I made a mistake in the last commit - after resolving the IP from the
passed `addr` for CIFS it would still resolve the `device` part.
Apply only one name resolution
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
(cherry picked from commit df43311f3d)
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Prior to 7a9b680a, the container short ID was added to the network
aliases only for custom networks. However, this logic wasn't preserved
in 6a2542d and now the cid is always added to the list of network
aliases.
This commit reintroduces the old logic.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
(cherry picked from commit 9f37672ca8)
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
Commit 21e50b89c9 added a label on the buildkit
worker to advertise the host-gateway-ip. This option can be either set by the
user in the daemon config, or otherwise defaults to the gateway-ip.
If no value is set by the user, discovery of the gateway-ip happens when
initializing the network-controller (`NewDaemon`, `daemon.restore()`).
However d222bf097c changed how we handle the
daemon config. As a result, the `cli.Config` used when initializing the
builder only holds configuration information form the daemon config
(user-specified or defaults), but is not updated with information set
by `NewDaemon`.
This patch adds an accessor on the daemon to get the current daemon config.
An alternative could be to return the config by `NewDaemon` (which should
likely be a _copy_ of the config).
Before this patch:
docker buildx inspect default
Name: default
Driver: docker
Nodes:
Name: default
Endpoint: default
Status: running
Buildkit: v0.12.4+3b6880d2a00f
Platforms: linux/arm64, linux/amd64, linux/amd64/v2, linux/riscv64, linux/ppc64le, linux/s390x, linux/386, linux/mips64le, linux/mips64, linux/arm/v7, linux/arm/v6
Labels:
org.mobyproject.buildkit.worker.moby.host-gateway-ip: <nil>
After this patch:
docker buildx inspect default
Name: default
Driver: docker
Nodes:
Name: default
Endpoint: default
Status: running
Buildkit: v0.12.4+3b6880d2a00f
Platforms: linux/arm64, linux/amd64, linux/amd64/v2, linux/riscv64, linux/ppc64le, linux/s390x, linux/386, linux/mips64le, linux/mips64, linux/arm/v7, linux/arm/v6
Labels:
org.mobyproject.buildkit.worker.moby.host-gateway-ip: 172.18.0.1
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 00c9785e2e)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
With containerd snapshotters enabled `docker run` currently fails when
creating a container from an image that doesn't have the default host
platform without an explicit `--platform` selection:
```
$ docker run image:amd64
Unable to find image 'asdf:amd64' locally
docker: Error response from daemon: pull access denied for asdf, repository does not exist or may require 'docker login'.
See 'docker run --help'.
```
This is confusing and the graphdriver behavior is much better here,
because it runs whatever platform the image has, but prints a warning:
```
$ docker run image:amd64
WARNING: The requested image's platform (linux/amd64) does not match the detected host platform (linux/arm64/v8) and no specific platform was requested
```
This commits changes the containerd snapshotter behavior to be the same
as the graphdriver. This doesn't affect container creation when platform
is specified explicitly.
```
$ docker run --rm --platform linux/arm64 asdf:amd64
Unable to find image 'asdf:amd64' locally
docker: Error response from daemon: pull access denied for asdf, repository does not exist or may require 'docker login'.
See 'docker run --help'.
```
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
(cherry picked from commit e438db19d56bef55f9676af9db46cc04caa6330b)
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
This matcher was only used internally in the containerd implementation of
the image store. Un-export it, and make it a local utility in that package
to prevent external use.
This package was introduced in 1616a09b61
(v24.0), and there are no known external consumers of this package, so there
should be no need to deprecate / alias the old location.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 94b4765363)
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Commit 8ae94cafa5 added a DNS resolution
of the `device` part of the volume option.
The previous way to resolve the passed hostname was to use `addr`
option, which was handled by the same code path as the `nfs` mount type.
The issue is that `addr` is also an SMB module option handled by kernel
and passing a hostname as `addr` produces an invalid argument error.
To fix that, restore the old behavior to handle `addr` the same way as
before, and only perform the new DNS resolution of `device` if there is
no `addr` passed.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
(cherry picked from commit 0d51cf9db8)
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Update the version of compose used in CI to the latest version.
- full diff: docker/compose@v2.24.1...v2.24.2
- release notes: https://github.com/docker/compose/releases/tag/v2.24.2
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 05d952b246)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The names of extended attributes are not completely freeform. Attributes
are namespaced, and the kernel enforces (among other things) that only
attributes whose names are prefixed with a valid namespace are
permitted. The name of the attribute therefore needs to be known in
order to diagnose issues with lsetxattr. Include the name of the
extended attribute in the errors returned from the Lsetxattr and
Lgetxattr so users and us can more easily troubleshoot xattr-related
issues. Include the name in a separate rich-error field to provide code
handling the error enough information to determine whether or not the
failure can be ignored.
Signed-off-by: Cory Snider <csnider@mirantis.com>
(cherry picked from commit 43bf65c174)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Since v25.0 (commit ff50388), we validate endpoint settings when
containers are created, instead of doing so when containers are started.
However, a container created prior to that release would still trigger
validation error at start-time. In such case, the API returns a 500
status code because the Go error isn't wrapped into an InvalidParameter
error. This is now fixed.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
(cherry picked from commit fcc651972e)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The MAC address of a running container was stored in the same place as
the configured address for a container.
When starting a stopped container, a generated address was treated as a
configured address. If that generated address (based on an IPAM-assigned
IP address) had been reused, the containers ended up with duplicate MAC
addresses.
So, remember whether the MAC address was explicitly configured, and
clear it if not.
Signed-off-by: Rob Murray <rob.murray@docker.com>
(cherry picked from commit cd53b7380c)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These tables linked to deprecated API versions, and an up-to-date version of
the matrix is already included at https://docs.docker.com/engine/api/#api-version-matrix
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 521123944a)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
