Flatten the list of `docker run` flags and group them loosely by
category (general purpose, security, networking, ...).
Signed-off-by: Arnaud Porterie (icecrime) <arnaud.porterie@docker.com>
This also moves the variable holding the default runtime name from the
engine-api repository into docker repository
Signed-off-by: Kenfe-Mickael Laventure <mickael.laventure@gmail.com>
As described in our ROADMAP.md, introduce new Swarm management API
endpoints relying on swarmkit to deploy services. It currently vendors
docker/engine-api changes.
This PR is fully backward compatible (joining a Swarm is an optional
feature of the Engine, and existing commands are not impacted).
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
Signed-off-by: Victor Vieux <vieux@docker.com>
Signed-off-by: Daniel Nephin <dnephin@docker.com>
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Move container options into a struct so that tests should pass.
Remove unused FlagSet arg from Parse
Disable interspersed args on docker run
Signed-off-by: Daniel Nephin <dnephin@docker.com>
This PR adds support for user-defined health-check probes for Docker
containers. It adds a `HEALTHCHECK` instruction to the Dockerfile syntax plus
some corresponding "docker run" options. It can be used with a restart policy
to automatically restart a container if the check fails.
The `HEALTHCHECK` instruction has two forms:
* `HEALTHCHECK [OPTIONS] CMD command` (check container health by running a command inside the container)
* `HEALTHCHECK NONE` (disable any healthcheck inherited from the base image)
The `HEALTHCHECK` instruction tells Docker how to test a container to check that
it is still working. This can detect cases such as a web server that is stuck in
an infinite loop and unable to handle new connections, even though the server
process is still running.
When a container has a healthcheck specified, it has a _health status_ in
addition to its normal status. This status is initially `starting`. Whenever a
health check passes, it becomes `healthy` (whatever state it was previously in).
After a certain number of consecutive failures, it becomes `unhealthy`.
The options that can appear before `CMD` are:
* `--interval=DURATION` (default: `30s`)
* `--timeout=DURATION` (default: `30s`)
* `--retries=N` (default: `1`)
The health check will first run **interval** seconds after the container is
started, and then again **interval** seconds after each previous check completes.
If a single run of the check takes longer than **timeout** seconds then the check
is considered to have failed.
It takes **retries** consecutive failures of the health check for the container
to be considered `unhealthy`.
There can only be one `HEALTHCHECK` instruction in a Dockerfile. If you list
more than one then only the last `HEALTHCHECK` will take effect.
The command after the `CMD` keyword can be either a shell command (e.g. `HEALTHCHECK
CMD /bin/check-running`) or an _exec_ array (as with other Dockerfile commands;
see e.g. `ENTRYPOINT` for details).
The command's exit status indicates the health status of the container.
The possible values are:
- 0: success - the container is healthy and ready for use
- 1: unhealthy - the container is not working correctly
- 2: starting - the container is not ready for use yet, but is working correctly
If the probe returns 2 ("starting") when the container has already moved out of the
"starting" state then it is treated as "unhealthy" instead.
For example, to check every five minutes or so that a web-server is able to
serve the site's main page within three seconds:
HEALTHCHECK --interval=5m --timeout=3s \
CMD curl -f http://localhost/ || exit 1
To help debug failing probes, any output text (UTF-8 encoded) that the command writes
on stdout or stderr will be stored in the health status and can be queried with
`docker inspect`. Such output should be kept short (only the first 4096 bytes
are stored currently).
When the health status of a container changes, a `health_status` event is
generated with the new status. The health status is also displayed in the
`docker ps` output.
Signed-off-by: Thomas Leonard <thomas.leonard@docker.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Since 1.9, the following short variant options have been
deprecated in favor of their long variants:
`docker run -c (--cpu-shares)`
`docker build -c (--cpu-shares)`
`docker create -c (--cpu-shares)`
`docker update -c (--cpu-shares)`
However, `-c` is still widely used and is considered as
a convenient option for swarm (see #16271).
This fix undeprecated the command line short
variant options of `-c` and updated the deprecated.md.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the issue raised in #21976 and allows
the options of `--add-host` and `--net=host` to work at the same time.
The documentation has been updated and additional tests have been
added to cover this change.
This fix fixes#21976.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the issue raised in #21976 and allows
the options of `--dns`, `--dns-search`, `--dns-opt` and `--net=host`
to work at the same time.
The documentation has been updated and additional tests have been
added to cover this change.
This fix fixes#21976.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This commit is a follow up of the last commit:
Vendor engine-api to allow docker daemon reload event.
After vendor/engine-api has been updated, the following
unit test fails:
```
--- FAIL: TestRestartPolicy (0.00s)
hostconfig_test.go:177: RestartPolicy.IsNone for { 0} should have been false but was true
```
The reason for the above failed unit test is that pull request:
https://github.com/docker/engine-api/pull/200
updated behavior of the restart policy and makes restartpolicy.IsNone
return true if restart policy name is `""`. As a result, the above
mentioned unit test fails.
This fix fixes the inconsistency of the unit test so that `TestRestartPolicy`
could pass again.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This patch will allow users to specify namespace specific "kernel parameters"
for running inside of a container.
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
This fix tries to fix the discrepancy between API and CLI on hostname
validation. Previously, the hostname validation was handled at the
CLI interface in runconfig/opts/parse.go and return an error if the
hostname is invalid. However, if an end user use the remote API to
pass the hostname, the error will not be returned immediately.
Instead the error will only be thrown out when the container creation
fails. This creates behavior discrepancy between API and CLI.
In this fix, the hostname validation was moved to
verifyContainerSettings so the behavior will be the same for API and
CLI.
After the change, since CLI does not handle the hostname validation
any more, the previous unit tests about hostname validation on CLI
in runconfig/opts/parse_test.go has to be updated as well because
there is no validation at this stage. All those unit tests are moved
to integration test TestRunTooLongHostname so that the hostname
validation is still properly covered as before.
Note: Since the hostname validation moved to API, the error message
changes from `invalid hostname format for --hostname:` to
`invalid hostname format:` as well because `--hostname` is passed
to CLI only.
This fix fixes#21595.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Creates a `fixedBuffer` type that is used to encapsulate functionality
for reading/writing from the underlying byte slices.
Uses lazily-loaded set of sync.Pools for storing buffers that are no
longer needed so they can be re-used.
```
benchmark old ns/op new ns/op delta
BenchmarkBytesPipeWrite-8 138469 48985 -64.62%
BenchmarkBytesPipeRead-8 130922 56601 -56.77%
benchmark old allocs new allocs delta
BenchmarkBytesPipeWrite-8 18 8 -55.56%
BenchmarkBytesPipeRead-8 0 0 +0.00%
benchmark old bytes new bytes delta
BenchmarkBytesPipeWrite-8 66903 1649 -97.54%
BenchmarkBytesPipeRead-8 0 1 +Inf%
```
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This fix tries to fix issues encountered when running a container with a hostname
that is longer than HOST_NAME_MAX(64).
Previously, `could not synchronise with container process` was generated as the
length of the regex check was missing.
This fix covers the length check so that a hostname that is longer than
HOST_NAME_MAX(64) will be given a correct error message.
Several unit tests cases and additional integration test cases are added as well.
This fix closes#21445.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
The issue comes from the implementation of volumeSplitN() where a
driver letter (`[a-zA-Z]:`) was assumed to follow either `:`, `/`,
or `\\`.
In Windows driver letter appears in two situations:
a. `^[a-zA-Z]:` (A colon followed by `^[a-zA-Z]:` is OK as colon is
the separator in volume option)
b. A string in the format like `\\?\C:\Windows\...` (UNC).
Therefore, a driver letter can only follow either a `:` or `\\`
This PR removes the condition of `/` before the driver letter so
that options like `-v /tmp/q:/foo` could be handled correctly. A
couple of tests has also been added.
This PR fixes#20122.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
All other options we have use `=` as separator, labels,
log configurations, graph configurations and so on.
We should be consistent and use `=` for the security
options too.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Validates whether the given hostname is RFC 1123
(https://tools.ietf.org/html/rfc1123) compliant.
Fixes#20371
Signed-off-by: Andrew Guenther <guenther.andrew.j@gmail.com>
This allows users to provide a FQDN as hostname or to use distinct hostname and
domainname parts. Depends on https://github.com/docker/libnetwork/pull/950
Signed-off-by: Tim Hockin <thockin@google.com>
Following #19995 and #17409 this PR enables skipping userns re-mapping
when creating a container (or when executing a command). Thus, enabling
privileged containers running side by side with userns remapped
containers.
The feature is enabled by specifying ```--userns:host```, which will not
remapped the user if userns are applied. If this flag is not specified,
the existing behavior (which blocks specific privileged operation)
remains.
Signed-off-by: Liron Levin <liron@twistlock.com>
Docker creates a UTS namespace by default, even with --net=host, so it
is reasonable to let the user set the hostname. Note that --hostname is
forbidden if the user specifies --uts=host.
Closes#12076
Signed-off-by: Jason Heiss <jheiss@aput.net>
Default is predefined network and is reserved, so we should stop user
from creating network with name `default`
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
This brings in the container-local alias functionality for containers
connected to u ser-defined networks.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
It's like `MemorySwappiness`, the default value has specific
meaning (default false means enable oom kill).
We need to change it to pointer so we can update it after
container is created.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
(cherry picked from commit 9c2ea42329)
Conflicts:
vendor/src/github.com/docker/engine-api/types/container/host_config.go
Merge was used by builder and daemon. With this commit, the builder
call has been inlined and the function moved to the daemon package,
which is the only other caller.
Signed-off-by: Anusha Ragunathan <anusha@docker.com>
dockerfile.Config is almost redundant with ImageBuildOptions.
Unify the two so that the latter can be removed. This also
helps build's API endpoint code to be less dependent on package
dockerfile.
Signed-off-by: Anusha Ragunathan <anusha@docker.com>
These validators are only used by runconfig.Parse() or some other part of the
client, so move them into the client-side package.
Signed-off-by: Daniel Nephin <dnephin@docker.com>
The parse.go file is used almost exclusively in the client. The few small
functions that are used outside of the client could easily be copied out
when the client is extracted, allowing this runconfig/opts package to
move to the client.
Signed-off-by: Daniel Nephin <dnephin@docker.com>
- Make the API client library completely standalone.
- Move windows partition isolation detection to the client, so the
driver doesn't use external types.
Signed-off-by: David Calavera <david.calavera@gmail.com>
This is a very docker concept that nobody elses need.
We only maintain it to keep the API backwards compatible.
Signed-off-by: David Calavera <david.calavera@gmail.com>
1. It's a cgroup api, fit the general defination that we take
cgroup options as kind of resource options.
2. It's common usage and very helpful as explained here:
https://github.com/docker/docker/pull/18270#issuecomment-160561316
3. It's already in `Resource` struct in
daemon/execdriver/driver_unix.go
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
It will Tar up contents of child directory onto tmpfs if mounted over
This patch will use the new PreMount and PostMount hooks to "tar"
up the contents of the base image on top of tmpfs mount points.
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
libcontainer v0.0.4 introduces setting `/proc/self/oom_score_adj` to
better tune oom killing preferences for container process. This patch
simply integrates OomScoreAdj libcontainer's config option and adjust
the cli with this new option.
Signed-off-by: Antonio Murdaca <amurdaca@redhat.com>
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
This is a small configuration struct used in two scenarios:
1. To attach I/O pipes to a running containers.
2. To attach to execution processes inside running containers.
Although they are similar, keeping the struct in the same package
than exec and container can generate cycled dependencies if we
move any of them outside the daemon, like we want to do
with the container.
Signed-off-by: David Calavera <david.calavera@gmail.com>
- Optional "--shm-size=" was added to the sub-command(run, create,and build).
- The size of /dev/shm in the container can be changed
when container is made.
- Being able to specify is a numerical value that applies number,
b, k, m, and g.
- The default value is 64MB, when this option is not set.
- It deals with both native and lxc drivers.
Signed-off-by: NIWA Hideyuki <niwa.hiedyuki@jp.fujitsu.com>
