Before 4bafaa00aa, if the daemon was
killed while a container was running and the container shim is killed
before the daemon is restarted, such as if the host system is
hard-rebooted, the daemon would restore the container to the stopped
state and set the exit code to 255. The aforementioned commit introduced
a regression where the container's exit code would instead be set to 0.
Fix the regression so that the exit code is once against set to 255 on
restore.
Signed-off-by: Cory Snider <csnider@mirantis.com>
If an exec fails to start in such a way that containerd publishes an
exit event for it, daemon.ProcessEvent will race
daemon.ContainerExecStart in handling the failure. This race has been a
long-standing bug, which was mostly harmless until
4bafaa00aa. After that change, the daemon
would dereference a nil pointer and crash if ProcessEvent won the race.
Restore the status quo buggy behaviour by adding a check to skip the
dereference if execConfig.Process is nil.
Signed-off-by: Cory Snider <csnider@mirantis.com>
We missed a case when parsing extra hosts from the dockerfile
frontend so the build fails.
To handle this case we need to set a dedicated worker label
that contains the host gateway IP so clients like Buildx
can just set the proper host:ip when parsing extra hosts
that contain the special string "host-gateway".
Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>
The stargz snapshotter cannot be re-mounted, so the reference-counted
path must be used.
Co-authored-by: Djordje Lukic <djordje.lukic@docker.com>
Signed-off-by: Bjorn Neergaard <bjorn.neergaard@docker.com>
Commit 90de570cfa passed through the request
context to daemon.ContainerStop(). As a result, cancelling the context would
cancel the "graceful" stop of the container, and would proceed with forcefully
killing the container.
This patch partially reverts the changes from 90de570cfa
and breaks the context to prevent cancelling the context from cancelling the stop.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The official Python images on Docker Hub switched to debian bookworm,
which is now the current stable version of Debian.
However, the location of the apt repository config file changed, which
causes the Dockerfile build to fail;
Loaded image: emptyfs:latest
Loaded image ID: sha256:0df1207206e5288f4a989a2f13d1f5b3c4e70467702c1d5d21dfc9f002b7bd43
INFO: Building docker-sdk-python3:5.0.3...
tests/Dockerfile:6
--------------------
5 | ARG APT_MIRROR
6 | >>> RUN sed -ri "s/(httpredir|deb).debian.org/${APT_MIRROR:-deb.debian.org}/g" /etc/apt/sources.list \
7 | >>> && sed -ri "s/(security).debian.org/${APT_MIRROR:-security.debian.org}/g" /etc/apt/sources.list
8 |
--------------------
ERROR: failed to solve: process "/bin/sh -c sed -ri \"s/(httpredir|deb).debian.org/${APT_MIRROR:-deb.debian.org}/g\" /etc/apt/sources.list && sed -ri \"s/(security).debian.org/${APT_MIRROR:-security.debian.org}/g\" /etc/apt/sources.list" did not complete successfully: exit code: 2
This needs to be fixed in docker-py, but in the meantime, we can pin to
the bullseye variant.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This enables picking up OTLP tracing context for the gRPC
requests.
Also sets up the in-memory recorder that BuildKit History API
can use to store the traces associated with specific build
in a database after build completes.
This doesn't enable Jaeger tracing endpoints from env
but this can be easily enabled by adding another import if
maintainers want it.
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
go1.20.5 (released 2023-06-06) includes four security fixes to the cmd/go and
runtime packages, as well as bug fixes to the compiler, the go command, the
runtime, and the crypto/rsa, net, and os packages. See the Go 1.20.5 milestone
on our issue tracker for details:
https://github.com/golang/go/issues?q=milestone%3AGo1.20.5+label%3ACherryPickApproved
full diff: https://github.com/golang/go/compare/go1.20.4...go1.20.5
These minor releases include 3 security fixes following the security policy:
- cmd/go: cgo code injection
The go command may generate unexpected code at build time when using cgo. This
may result in unexpected behavior when running a go program which uses cgo.
This may occur when running an untrusted module which contains directories with
newline characters in their names. Modules which are retrieved using the go command,
i.e. via "go get", are not affected (modules retrieved using GOPATH-mode, i.e.
GO111MODULE=off, may be affected).
Thanks to Juho Nurminen of Mattermost for reporting this issue.
This is CVE-2023-29402 and Go issue https://go.dev/issue/60167.
- runtime: unexpected behavior of setuid/setgid binaries
The Go runtime didn't act any differently when a binary had the setuid/setgid
bit set. On Unix platforms, if a setuid/setgid binary was executed with standard
I/O file descriptors closed, opening any files could result in unexpected
content being read/written with elevated prilieges. Similarly if a setuid/setgid
program was terminated, either via panic or signal, it could leak the contents
of its registers.
Thanks to Vincent Dehors from Synacktiv for reporting this issue.
This is CVE-2023-29403 and Go issue https://go.dev/issue/60272.
- cmd/go: improper sanitization of LDFLAGS
The go command may execute arbitrary code at build time when using cgo. This may
occur when running "go get" on a malicious module, or when running any other
command which builds untrusted code. This is can by triggered by linker flags,
specified via a "#cgo LDFLAGS" directive.
Thanks to Juho Nurminen of Mattermost for reporting this issue.
This is CVE-2023-29404 and CVE-2023-29405 and Go issues https://go.dev/issue/60305 and https://go.dev/issue/60306.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
daemon.generateNewName() already reserves the generated name, but its name
did not indicate it did. The daemon.registerName() assumed that the generated
name still had to be reserved, which could mean it would try to reserve the
same name again.
This patch renames daemon.generateNewName to daemon.generateAndReserveName
to make it clearer what it does, and updates registerName() to return early
if it successfully generated (and registered) the container name.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The most notable change here is that the OCI's type uses a pointer for `Created`, which we probably should've been too, so most of these changes are accounting for that (and embedding our `Equal` implementation in the one single place it was used).
Signed-off-by: Tianon Gravi <admwiggin@gmail.com>
This utility was only used in a single location (as part of `docker info`),
but the `pkg/rootless` package is imported in various locations, causing
rootlesskit to be a dependency for consumers of that package.
Move GetRootlessKitClient to the daemon code, which is the only location
it was used.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
For configured runtimes with a runtimeType other than
io.containerd.runc.v1, io.containerd.runc.v2 and
io.containerd.runhcs.v1, the only supported way to pass configuration is
through the generic containerd "runtimeoptions/v1".Options type. Add a
unit test case which verifies that the options set in the daemon config
are correctly unmarshaled into the daemon's in-memory runtime config,
and that the map keys for the daemon config align with the ones used
when configuring cri-containerd (PascalCase, not camelCase or
snake_case).
Signed-off-by: Cory Snider <csnider@mirantis.com>
When constructing the client, and setting the User-Agent, care must be
taken to apply the header in the right location, as custom headers can
be set in the CLI configuration, and merging these custom headers should
not override the User-Agent header.
This patch adds a dedicated `WithUserAgent()` option, which stores the
user-agent separate from other headers, centralizing the merging of
other headers, so that other parts of the (CLI) code don't have to be
concerned with merging them in the right order.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Convert CreateMountpoint, ReadOnlyNonRecursive, and ReadOnlyForceRecursive.
See moby/swarmkit PR 3134
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
Some snapshotters (like overlayfs or zfs) can't mount the same
directories twice. For example if the same directroy is used as an upper
directory in two mounts the kernel will output this warning:
overlayfs: upperdir is in-use as upperdir/workdir of another mount, accessing files from both mounts will result in undefined behavior.
And indeed accessing the files from both mounts will result in an "No
such file or directory" error.
This change introduces reference counts for the mounts, if a directory
is already mounted the mount interface will only increment the mount
counter and return the mount target effectively making sure that the
filesystem doesn't end up in an undefined behavior.
Signed-off-by: Djordje Lukic <djordje.lukic@docker.com>
Audit the OCI spec options used for Linux containers to ensure they are
less order-dependent. Ensure they don't assume that any pointer fields
are non-nil and that they don't unintentionally clobber mutations to the
spec applied by other options.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Many of the fields in LinuxResources struct are pointers to scalars for
some reason, presumably to differentiate between set-to-zero and unset
when unmarshaling from JSON, despite zero being outside the acceptable
range for the corresponding kernel tunables. When creating the OCI spec
for a container, the daemon sets the container's OCI spec CPUShares and
BlkioWeight parameters to zero when the corresponding Docker container
configuration values are zero, signifying unset, despite the minimum
acceptable value for CPUShares being two, and BlkioWeight ten. This has
gone unnoticed as runC does not distingiush set-to-zero from unset as it
also uses zero internally to represent unset for those fields. However,
kata-containers v3.2.0-alpha.3 tries to apply the explicit-zero resource
parameters to the container, exactly as instructed, and fails loudly.
The OCI runtime-spec is silent on how the runtime should handle the case
when those parameters are explicitly set to out-of-range values and
kata's behaviour is not unreasonable, so the daemon must therefore be in
the wrong.
Translate unset values in the Docker container's resources HostConfig to
omit the corresponding fields in the container's OCI spec when starting
and updating a container in order to maximize compatibility with
runtimes.
Signed-off-by: Cory Snider <csnider@mirantis.com>
