Convert CreateMountpoint, ReadOnlyNonRecursive, and ReadOnlyForceRecursive.
See moby/swarmkit PR 3134
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
Some snapshotters (like overlayfs or zfs) can't mount the same
directories twice. For example if the same directroy is used as an upper
directory in two mounts the kernel will output this warning:
overlayfs: upperdir is in-use as upperdir/workdir of another mount, accessing files from both mounts will result in undefined behavior.
And indeed accessing the files from both mounts will result in an "No
such file or directory" error.
This change introduces reference counts for the mounts, if a directory
is already mounted the mount interface will only increment the mount
counter and return the mount target effectively making sure that the
filesystem doesn't end up in an undefined behavior.
Signed-off-by: Djordje Lukic <djordje.lukic@docker.com>
Audit the OCI spec options used for Linux containers to ensure they are
less order-dependent. Ensure they don't assume that any pointer fields
are non-nil and that they don't unintentionally clobber mutations to the
spec applied by other options.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Many of the fields in LinuxResources struct are pointers to scalars for
some reason, presumably to differentiate between set-to-zero and unset
when unmarshaling from JSON, despite zero being outside the acceptable
range for the corresponding kernel tunables. When creating the OCI spec
for a container, the daemon sets the container's OCI spec CPUShares and
BlkioWeight parameters to zero when the corresponding Docker container
configuration values are zero, signifying unset, despite the minimum
acceptable value for CPUShares being two, and BlkioWeight ten. This has
gone unnoticed as runC does not distingiush set-to-zero from unset as it
also uses zero internally to represent unset for those fields. However,
kata-containers v3.2.0-alpha.3 tries to apply the explicit-zero resource
parameters to the container, exactly as instructed, and fails loudly.
The OCI runtime-spec is silent on how the runtime should handle the case
when those parameters are explicitly set to out-of-range values and
kata's behaviour is not unreasonable, so the daemon must therefore be in
the wrong.
Translate unset values in the Docker container's resources HostConfig to
omit the corresponding fields in the container's OCI spec when starting
and updating a container in order to maximize compatibility with
runtimes.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Switch to using t.TempDir() instead of rolling our own.
Clean up mounts leaked by the tests as otherwise the tests fail due to
the leaked mounts because unlike the old cleanup code, t.TempDir()
cleanup does not ignore errors from os.RemoveAll.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Avoids invalidation of dev-systemd-true and dev-base when changing the
CLI version/repository.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Don't show `error: No such remote: 'origin'` error when building for the
first time and the cached git repository doesn't a remote yet.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Installs the buildx cli plugin in the container shell by default.
Previously user had to manually download the buildx binary to use
buildkit.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Use separate cli for integration-cli to allow use newer CLI for
interactive dev shell usage.
Both versions can be overriden with DOCKERCLI_VERSION or
DOCKERCLI_INTEGRATION_VERSION. Binary is downloaded from
download.docker.com if it's available, otherwise it's built from the
source.
For backwards compatibility DOCKER_CLI_PATH overrides BOTH clis.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
I missed the most important COPY in 637ca59375
Copying the source code into the dev-container does not depend on the parent
layers, so can use the --link option as well.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The daemon has made a habit of mutating the DefaultRuntime and Runtimes
values in the Config struct to merge defaults. This would be fine if it
was a part of the regular configuration loading and merging process,
as is done with other config options. The trouble is it does so in
surprising places, such as in functions with 'verify' or 'validate' in
their name. It has been necessary in order to validate that the user has
not defined a custom runtime named "runc" which would shadow the
built-in runtime of the same name. Other daemon code depends on the
runtime named "runc" always being defined in the config, but merging it
with the user config at the same time as the other defaults are merged
would trip the validation. The root of the issue is that the daemon has
used the same config values for both validating the daemon runtime
configuration as supplied by the user and for keeping track of which
runtimes have been set up by the daemon. Now that a completely separate
value is used for the latter purpose, surprising contortions are no
longer required to make the validation work as intended.
Consolidate the validation of the runtimes config and merging of the
built-in runtimes into the daemon.setupRuntimes() function. Set the
result of merging the built-in runtimes config and default default
runtime on the returned runtimes struct, without back-propagating it
onto the config.Config argument.
Signed-off-by: Cory Snider <csnider@mirantis.com>
The existing runtimes reload logic went to great lengths to replace the
directory containing runtime wrapper scripts as atomically as possible
within the limitations of the Linux filesystem ABI. Trouble is,
atomically swapping the wrapper scripts directory solves the wrong
problem! The runtime configuration is "locked in" when a container is
started, including the path to the runC binary. If a container is
started with a runtime which requires a daemon-managed wrapper script
and then the daemon is reloaded with a config which no longer requires
the wrapper script (i.e. some args -> no args, or the runtime is dropped
from the config), that container would become unmanageable. Any attempts
to stop, exec or otherwise perform lifecycle management operations on
the container are likely to fail due to the wrapper script no longer
existing at its original path.
Atomically swapping the wrapper scripts is also incompatible with the
read-copy-update paradigm for reloading configuration. A handler in the
daemon could retain a reference to the pre-reload configuration for an
indeterminate amount of time after the daemon configuration has been
reloaded and updated. It is possible for the daemon to attempt to start
a container using a deleted wrapper script if a request to run a
container races a reload.
Solve the problem of deleting referenced wrapper scripts by ensuring
that all wrapper scripts are *immutable* for the lifetime of the daemon
process. Any given runtime wrapper script must always exist with the
same contents, no matter how many times the daemon config is reloaded,
or what changes are made to the config. This is accomplished by using
everyone's favourite design pattern: content-addressable storage. Each
wrapper script file name is suffixed with the SHA-256 digest of its
contents to (probabilistically) guarantee immutability without needing
any concurrency control. Stale runtime wrapper scripts are only cleaned
up on the next daemon restart.
Split the derived runtimes configuration from the user-supplied
configuration to have a place to store derived state without mutating
the user-supplied configuration or exposing daemon internals in API
struct types. Hold the derived state and the user-supplied configuration
in a single struct value so that they can be updated as an atomic unit.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Ensure data-race-free access to the daemon configuration without
locking by mutating a deep copy of the config and atomically storing
a pointer to the copy into the daemon-wide configStore value. Any
operations which need to read from the daemon config must capture the
configStore value only once and pass it around to guarantee a consistent
view of the config.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Config reloading has interleaved validations and other fallible
operations with mutating the live daemon configuration. The daemon
configuration could be left in a partially-reloaded state if any of the
operations returns an error. Mutating a copy of the configuration and
atomically swapping the config struct on success is not currently an
option as config values are not copyable due to the presence of
sync.Mutex fields. Introduce a two-phase commit protocol to defer any
mutations of the daemon state until after all fallible operations have
succeeded.
Reload transactions are not yet entirely hermetic. The platform
reloading logic for custom runtimes on *nix could still leave the
directory of generated runtime wrapper scripts in an indeterminate state
if an error is encountered.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Historically, daemon.RegistryHosts() has returned a docker.RegistryHosts
callback function which closes over a point-in-time snapshot of the
daemon configuration. When constructing the BuildKit builder at daemon
startup, the return value of daemon.RegistryHosts() has been used.
Therefore the BuildKit builder would use the registry configuration as
it was at daemon startup for the life of the process, even if the
registry configuration is changed and the configuration reloaded.
Provide BuildKit with a RegistryHosts callback which reflects the
live daemon configuration after reloads so that registry operations
performed by BuildKit always use the same configuration as the rest of
the daemon.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Passing around a bare pointer to the map of configured features in order
to propagate to consumers changes to the configuration across reloads is
dangerous. Map operations are not atomic, so concurrently reading from
the map while it is being updated is a data race as there is no
synchronization. Use a getter function to retrieve the current features
map so the features can be retrieved race-free.
Remove the unused features argument from the build router.
Signed-off-by: Cory Snider <csnider@mirantis.com>
With this patch, the user-agent has information about the containerd-client
version and the storage-driver that's used when using the containerd-integration;
time="2023-06-01T11:27:07.959822887Z" level=info msg="listening on [::]:5000" go.version=go1.19.9 instance.id=53590f34-096a-4fd1-9c58-d3b8eb7e5092 service=registry version=2.8.2
...
172.18.0.1 - - [01/Jun/2023:11:30:12 +0000] "HEAD /v2/multifoo/blobs/sha256:c7ec7661263e5e597156f2281d97b160b91af56fa1fd2cc045061c7adac4babd HTTP/1.1" 404 157 "" "docker/dev go/go1.20.4 git-commit/8d67d0c1a8 kernel/5.15.49-linuxkit-pr os/linux arch/arm64 containerd-client/1.6.21+unknown storage-driver/overlayfs UpstreamClient(Docker-Client/24.0.2 \\(linux\\))"
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
It was not really "inserting" anything, just formatting and appending.
Simplify this by changing this in to a `getUpstreamUserAgent()` function
which returns the upstream User-Agent (if any) into a `UpstreamClient()`.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Use a const for the characters to escape, instead of implementing
this as a generic escaping function.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Before this, the client would report itself as containerd, and the containerd
version from the containerd go module:
time="2023-06-01T09:43:21.907359755Z" level=info msg="listening on [::]:5000" go.version=go1.19.9 instance.id=67b89d83-eac0-4f85-b36b-b1b18e80bde1 service=registry version=2.8.2
...
172.18.0.1 - - [01/Jun/2023:09:43:33 +0000] "HEAD /v2/multifoo/blobs/sha256:cb269d7c0c1ca22fb5a70342c3ed2196c57a825f94b3f0e5ce3aa8c55baee829 HTTP/1.1" 404 157 "" "containerd/1.6.21+unknown"
With this patch, the user-agent has the docker daemon information;
time="2023-06-01T11:27:07.959822887Z" level=info msg="listening on [::]:5000" go.version=go1.19.9 instance.id=53590f34-096a-4fd1-9c58-d3b8eb7e5092 service=registry version=2.8.2
...
172.18.0.1 - - [01/Jun/2023:11:27:20 +0000] "HEAD /v2/multifoo/blobs/sha256:c7ec7661263e5e597156f2281d97b160b91af56fa1fd2cc045061c7adac4babd HTTP/1.1" 404 157 "" "docker/dev go/go1.20.4 git-commit/8d67d0c1a8 kernel/5.15.49-linuxkit-pr os/linux arch/arm64 UpstreamClient(Docker-Client/24.0.2 \\(linux\\))"
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- Fix timeouts from very long raft messages
- fix: code optimization
- update dependencies
full diff: 75e92ce14f...01bb7a4139
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Build-cache for the build-stages themselves are already invalidated if the
base-images they're using is updated, and the COPY operations don't depend
on previous steps (as there's no overlap between artifacts copied).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The default implementation of the containerd.Image interface provided by
the containerd operates on the parent index/manifest list of the image
and the platform matcher.
This isn't convenient when a specific manifest is already known and it's
redundant to search the whole index for a manifest that matches the
given platform matcher. It can also result in a different manifest
picked up than expected when multiple manifests with the same platform
are present.
This introduces a walkImageManifests which walks the provided image and
calls a handler with a ImageManifest, which is a simple wrapper that
implements containerd.Image interfaces and performs all containerd.Image
operations against a platform specific manifest instead of the root
manifest list/index.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
