Fix `error mounting "/etc/hosts" to rootfs at "/etc/hosts": mount
/etc/hosts:/etc/hosts (via /proc/self/fd/6), flags: 0x5021: operation
not permitted`.
This error was introduced in 7d08d84b03
(`dockerd-rootless.sh: set rootlesskit --state-dir=DIR`) that changed
the filesystem of the state dir from /tmp to /run (in a typical setup).
Fix issue 47248
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
This patch:
- Deprecates pkg/system.DefaultPathEnv
- Moves the implementation inside oci
- Adds TODOs to align the default in the Builder with the one used elsewhere
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
plugin/v2/settable_test.go:24:29: empty-lines: extra empty line at the end of a block (revive)
plugin/manager_linux.go:96:6: empty-lines: extra empty line at the end of a block (revive)
plugin/backend_linux.go:373:16: empty-lines: extra empty line at the start of a block (revive)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
I think this was there for historic reasons (may have been goimports expected
this, and we used to have a linter that wanted it), but it's not needed, so
let's remove it (to make my IDE less complaining about unneeded aliases).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This removes the use of the old distribution code in the plugin packages
and replaces it with containerd libraries for plugin pushes and pulls.
Additionally it uses a content store from containerd which seems like
it's compatible with the old "basicBlobStore" in the plugin package.
This is being used locally isntead of through the containerd client for
now.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Format the source according to latest goimports.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This was added as part of a53930a04f with
the intent to sort the mounts in the plugin config, but this was sorting
*all* the mounts from the default OCI spec which is problematic.
In reality we don't need to sort this because we are only adding a
self-binded mount to flag it as rshared.
We may want to look at sorting the plugin mounts before they are added
to the OCI spec in the future, but for now I think the existing behavior
is fine since the plugin author has control of the order (except for the
propagated mount).
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Before this change, volume management was relying on the fact that
everything the plugin mounts is visible on the host within the plugin's
rootfs. In practice this caused some issues with mount leaks, so we
changed the behavior such that mounts are not visible on the plugin's
rootfs, but available outside of it, which breaks volume management.
To fix the issue, allow the plugin to scope the path correctly rather
than assuming that everything is visible in `p.Rootfs`.
In practice this is just scoping the `PropagatedMount` paths to the
correct host path.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Setting up the mounts on the host increases chances of mount leakage and
makes for more cleanup after the plugin has stopped.
With this change all mounts for the plugin are performed by the
container runtime and automatically cleaned up when the container exits.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Currently the metrics plugin uses a really hackish host mount with
propagated mounts to get the metrics socket into a plugin after the
plugin is alreay running.
This approach ends up leaking mounts which requires setting the plugin
manager root to private, which causes some other issues.
With this change, plugin subsystems can register a set of modifiers to
apply to the plugin's runtime spec before the plugin is ever started.
This will help to generalize some of the customization work that needs
to happen for various plugin subsystems (and future ones).
Specifically it lets the metrics plugin subsystem append a mount to the
runtime spec to mount the metrics socket in the plugin's mount namespace
rather than the host's and prevetns any leaking due to this mount.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Files that are suffixed with `_linux.go` or `_windows.go` are
already only built on Linux / Windows, so these build-tags
were redundant.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Plugin config can have Mounts without a 'Source' field. In such cases,
performing a 'plugin set' on the mount source will panic the daemon. Its
the same case for device paths as well. This detects the case and
returns error.
Signed-off-by: Anusha Ragunathan <anusha.ragunathan@docker.com>
This also update:
- runc to 3f2f8b84a77f73d38244dd690525642a72156c64
- runtime-specs to v1.0.0
Signed-off-by: Kenfe-Mickael Laventure <mickael.laventure@gmail.com>
Enables other subsystems to watch actions for a plugin(s).
This will be used specifically for implementing plugins on swarm where a
swarm controller needs to watch the state of a plugin.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Tested using global-net-plugin-ipc which sets PidHost in config.json.
Plugins might need access to host pid namespace. Add support for that.
Tested using aragunathan/global-net-plugin-ipc which sets "pidhost" in
config.json. Observed using `readlink /proc/self/ns/pid` that plugin and
host have the same ns.
Signed-off-by: Anusha Ragunathan <anusha.ragunathan@docker.com>
Plugins might need access to host ipc namespace. A good usecase is
a volume plugin running iscsi multipath commands that need access to
host kernel locks.
Tested with a custom plugin (aragunathan/global-net-plugin-full) that's
built with `"ipchost" : true` in config.json. Observed using
`readlink /proc/self/ns/ipc` that plugin and host have the same ns.
Signed-off-by: Anusha Ragunathan <anusha.ragunathan@docker.com>
The `digest` data type, used throughout docker for image verification
and identity, has been broken out into `opencontainers/go-digest`. This
PR updates the dependencies and moves uses over to the new type.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Go style calls for mixed caps instead of all caps:
https://golang.org/doc/effective_go.html#mixed-caps
Change LOOKUP, ACQUIRE, and RELEASE to Lookup, Acquire, and Release.
This vendors a fork of libnetwork for now, to deal with a cyclic
dependency issue. The change will be upstream to libnetwork once this is
merged.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Move plugins to shared distribution stack with images.
Create immutable plugin config that matches schema2 requirements.
Ensure data being pushed is same as pulled/created.
Store distribution artifacts in a blobstore.
Run init layer setup for every plugin start.
Fix breakouts from unsafe file accesses.
Add support for `docker plugin install --alias`
Uses normalized references for default names to avoid collisions when using default hosts/tags.
Some refactoring of the plugin manager to support the change, like removing the singleton manager and adding manager config struct.
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
Signed-off-by: Derek McGowan <derek@mcgstyle.net>
Adds 2 new methods to v2 plugin `Acquire` and `Release` which allow
refcounting directly at the plugin level instead of just the store.
Since a graphdriver is initialized exactly once, and is really managed
by a separate object, it didn't really seem right to call
`getter.Get()` to refcount graphdriver plugins.
On shutdown it was particularly weird where we'd either need to keep a
driver reference in daemon, or keep a reference to the pluggin getter in
the layer store, and even then still store extra details on if the
graphdriver is a plugin or not.
Instead the plugin proxy itself will handle calling the neccessary
refcounting methods directly on the plugin object.
Also adds a new interface in `plugingetter` to account for these new
functions which are not going to be implemented by v1 plugins.
Changes terms `plugingetter.CREATE` and `plugingetter.REMOVE` to
`ACQUIRE` and `RELEASE` respectively, which seems to be better
adjectives for what we're doing.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Legacy plugins expect host-relative paths (such as for Volume.Mount).
However, a containerized plugin cannot respond with a host-relative
path. Therefore, this commit modifies new volume plugins' paths in Mount
and List to prepend the container's rootfs path.
This introduces a new PropagatedMount field in the Plugin Config.
When it is set for volume plugins, RootfsPropagation is set to rshared
and the path specified by PropagatedMount is bind-mounted with rshared
prior to launching the container. This is so that the daemon code can
access the paths returned by the plugin from the host mount namespace.
Signed-off-by: Tibor Vass <tibor@docker.com>
v2/Plugin struct had fields that were
- purely used by the manager.
- unsafely exposed without proper locking.
This change fixes this, by moving relevant fields to the manager as well
as making remaining fields as private and providing proper accessors for
them.
Signed-off-by: Anusha Ragunathan <anusha@docker.com>
In the plugin manifest, Capabilities has been moved to
Linux.Capabilities to avoid confusion with Interface.Types[i].Capability
A DeviceCreation boolean has also been added to the manifest. This could
be changed in the future to be specific to a major number.
Signed-off-by: Tibor Vass <tibor@docker.com>
