Turn warnings into a deprecation notice and highlight that it will
prevent daemon startup in future releases.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
The Go 1.21.5 compiler has a bug: per-file language version override
directives do not take effect when instantiating generic functions which
have certain nontrivial type constraints. Consequently, a module-mode
project with Moby as a dependency may fail to compile when the compiler
incorrectly applies go1.16 semantics to the generic function call.
As the offending function is trivial and is only used in one place, work
around the issue by converting it to a concretely-typed function.
Signed-off-by: Cory Snider <csnider@mirantis.com>
This repository is not yet a module (i.e., does not have a `go.mod`). This
is not problematic when building the code in GOPATH or "vendor" mode, but
when using the code as a module-dependency (in module-mode), different semantics
are applied since Go1.21, which switches Go _language versions_ on a per-module,
per-package, or even per-file base.
A condensed summary of that logic [is as follows][1]:
- For modules that have a go.mod containing a go version directive; that
version is considered a minimum _required_ version (starting with the
go1.19.13 and go1.20.8 patch releases: before those, it was only a
recommendation).
- For dependencies that don't have a go.mod (not a module), go language
version go1.16 is assumed.
- Likewise, for modules that have a go.mod, but the file does not have a
go version directive, go language version go1.16 is assumed.
- If a go.work file is present, but does not have a go version directive,
language version go1.17 is assumed.
When switching language versions, Go _downgrades_ the language version,
which means that language features (such as generics, and `any`) are not
available, and compilation fails. For example:
# github.com/docker/cli/cli/context/store
/go/pkg/mod/github.com/docker/cli@v25.0.0-beta.2+incompatible/cli/context/store/storeconfig.go:6:24: predeclared any requires go1.18 or later (-lang was set to go1.16; check go.mod)
/go/pkg/mod/github.com/docker/cli@v25.0.0-beta.2+incompatible/cli/context/store/store.go:74:12: predeclared any requires go1.18 or later (-lang was set to go1.16; check go.mod)
Note that these fallbacks are per-module, per-package, and can even be
per-file, so _(indirect) dependencies_ can still use modern language
features, as long as their respective go.mod has a version specified.
Unfortunately, these failures do not occur when building locally (using
vendor / GOPATH mode), but will affect consumers of the module.
Obviously, this situation is not ideal, and the ultimate solution is to
move to go modules (add a go.mod), but this comes with a non-insignificant
risk in other areas (due to our complex dependency tree).
We can revert to using go1.16 language features only, but this may be
limiting, and may still be problematic when (e.g.) matching signatures
of dependencies.
There is an escape hatch: adding a `//go:build` directive to files that
make use of go language features. From the [go toolchain docs][2]:
> The go line for each module sets the language version the compiler enforces
> when compiling packages in that module. The language version can be changed
> on a per-file basis by using a build constraint.
>
> For example, a module containing code that uses the Go 1.21 language version
> should have a `go.mod` file with a go line such as `go 1.21` or `go 1.21.3`.
> If a specific source file should be compiled only when using a newer Go
> toolchain, adding `//go:build go1.22` to that source file both ensures that
> only Go 1.22 and newer toolchains will compile the file and also changes
> the language version in that file to Go 1.22.
This patch adds `//go:build` directives to those files using recent additions
to the language. It's currently using go1.19 as version to match the version
in our "vendor.mod", but we can consider being more permissive ("any" requires
go1.18 or up), or more "optimistic" (force go1.21, which is the version we
currently use to build).
For completeness sake, note that any file _without_ a `//go:build` directive
will continue to use go1.16 language version when used as a module.
[1]: 58c28ba286/src/cmd/go/internal/gover/version.go (L9-L56)
[2]: https://go.dev/doc/toolchain
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The daemon currently provides support for API versions all the way back
to v1.12, which is the version of the API that shipped with docker 1.0. On
Windows, the minimum supported version is v1.24.
Such old versions of the client are rare, and supporting older API versions
has accumulated significant amounts of code to remain backward-compatible
(which is largely untested, and a "best-effort" at most).
This patch updates the minimum API version to v1.24, which is the fallback
API version used when API-version negotiation fails. The intent is to start
deprecating older API versions, but no code is removed yet as part of this
patch, and a DOCKER_MIN_API_VERSION environment variable is added, which
allows overriding the minimum version (to allow restoring the behavior from
before this patch).
With this patch the daemon defaults to API v1.24 as minimum:
docker version
Client:
Version: 24.0.2
API version: 1.43
Go version: go1.20.4
Git commit: cb74dfc
Built: Thu May 25 21:50:49 2023
OS/Arch: linux/arm64
Context: default
Server:
Engine:
Version: dev
API version: 1.44 (minimum version 1.24)
Go version: go1.21.3
Git commit: 0322a29b9ef8806aaa4b45dc9d9a2ebcf0244bf4
Built: Mon Dec 4 15:22:17 2023
OS/Arch: linux/arm64
Experimental: false
containerd:
Version: v1.7.9
GitCommit: 4f03e100cb967922bec7459a78d16ccbac9bb81d
runc:
Version: 1.1.10
GitCommit: v1.1.10-0-g18a0cb0
docker-init:
Version: 0.19.0
GitCommit: de40ad0
Trying to use an older version of the API produces an error:
DOCKER_API_VERSION=1.23 docker version
Client:
Version: 24.0.2
API version: 1.23 (downgraded from 1.43)
Go version: go1.20.4
Git commit: cb74dfc
Built: Thu May 25 21:50:49 2023
OS/Arch: linux/arm64
Context: default
Error response from daemon: client version 1.23 is too old. Minimum supported API version is 1.24, please upgrade your client to a newer version
To restore the previous minimum, users can start the daemon with the
DOCKER_MIN_API_VERSION environment variable set:
DOCKER_MIN_API_VERSION=1.12 dockerd
API 1.12 is the oldest supported API version on Linux;
docker version
Client:
Version: 24.0.2
API version: 1.43
Go version: go1.20.4
Git commit: cb74dfc
Built: Thu May 25 21:50:49 2023
OS/Arch: linux/arm64
Context: default
Server:
Engine:
Version: dev
API version: 1.44 (minimum version 1.12)
Go version: go1.21.3
Git commit: 0322a29b9ef8806aaa4b45dc9d9a2ebcf0244bf4
Built: Mon Dec 4 15:22:17 2023
OS/Arch: linux/arm64
Experimental: false
containerd:
Version: v1.7.9
GitCommit: 4f03e100cb967922bec7459a78d16ccbac9bb81d
runc:
Version: 1.1.10
GitCommit: v1.1.10-0-g18a0cb0
docker-init:
Version: 0.19.0
GitCommit: de40ad0
When using the `DOCKER_MIN_API_VERSION` with a version of the API that
is not supported, an error is produced when starting the daemon;
DOCKER_MIN_API_VERSION=1.11 dockerd --validate
invalid DOCKER_MIN_API_VERSION: minimum supported API version is 1.12: 1.11
DOCKER_MIN_API_VERSION=1.45 dockerd --validate
invalid DOCKER_MIN_API_VERSION: maximum supported API version is 1.44: 1.45
Specifying a malformed API version also produces the same error;
DOCKER_MIN_API_VERSION=hello dockerd --validate
invalid DOCKER_MIN_API_VERSION: minimum supported API version is 1.12: hello
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
I was trying to find out why `docker info` was sometimes slow so
plumbing a context through to propagate trace data through.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
The github.com/containerd/containerd/log package was moved to a separate
module, which will also be used by upcoming (patch) releases of containerd.
This patch moves our own uses of the package to use the new module.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The daemon has made a habit of mutating the DefaultRuntime and Runtimes
values in the Config struct to merge defaults. This would be fine if it
was a part of the regular configuration loading and merging process,
as is done with other config options. The trouble is it does so in
surprising places, such as in functions with 'verify' or 'validate' in
their name. It has been necessary in order to validate that the user has
not defined a custom runtime named "runc" which would shadow the
built-in runtime of the same name. Other daemon code depends on the
runtime named "runc" always being defined in the config, but merging it
with the user config at the same time as the other defaults are merged
would trip the validation. The root of the issue is that the daemon has
used the same config values for both validating the daemon runtime
configuration as supplied by the user and for keeping track of which
runtimes have been set up by the daemon. Now that a completely separate
value is used for the latter purpose, surprising contortions are no
longer required to make the validation work as intended.
Consolidate the validation of the runtimes config and merging of the
built-in runtimes into the daemon.setupRuntimes() function. Set the
result of merging the built-in runtimes config and default default
runtime on the returned runtimes struct, without back-propagating it
onto the config.Config argument.
Signed-off-by: Cory Snider <csnider@mirantis.com>
The existing runtimes reload logic went to great lengths to replace the
directory containing runtime wrapper scripts as atomically as possible
within the limitations of the Linux filesystem ABI. Trouble is,
atomically swapping the wrapper scripts directory solves the wrong
problem! The runtime configuration is "locked in" when a container is
started, including the path to the runC binary. If a container is
started with a runtime which requires a daemon-managed wrapper script
and then the daemon is reloaded with a config which no longer requires
the wrapper script (i.e. some args -> no args, or the runtime is dropped
from the config), that container would become unmanageable. Any attempts
to stop, exec or otherwise perform lifecycle management operations on
the container are likely to fail due to the wrapper script no longer
existing at its original path.
Atomically swapping the wrapper scripts is also incompatible with the
read-copy-update paradigm for reloading configuration. A handler in the
daemon could retain a reference to the pre-reload configuration for an
indeterminate amount of time after the daemon configuration has been
reloaded and updated. It is possible for the daemon to attempt to start
a container using a deleted wrapper script if a request to run a
container races a reload.
Solve the problem of deleting referenced wrapper scripts by ensuring
that all wrapper scripts are *immutable* for the lifetime of the daemon
process. Any given runtime wrapper script must always exist with the
same contents, no matter how many times the daemon config is reloaded,
or what changes are made to the config. This is accomplished by using
everyone's favourite design pattern: content-addressable storage. Each
wrapper script file name is suffixed with the SHA-256 digest of its
contents to (probabilistically) guarantee immutability without needing
any concurrency control. Stale runtime wrapper scripts are only cleaned
up on the next daemon restart.
Split the derived runtimes configuration from the user-supplied
configuration to have a place to store derived state without mutating
the user-supplied configuration or exposing daemon internals in API
struct types. Hold the derived state and the user-supplied configuration
in a single struct value so that they can be updated as an atomic unit.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Ensure data-race-free access to the daemon configuration without
locking by mutating a deep copy of the config and atomically storing
a pointer to the copy into the daemon-wide configStore value. Any
operations which need to read from the daemon config must capture the
configStore value only once and pass it around to guarantee a consistent
view of the config.
Signed-off-by: Cory Snider <csnider@mirantis.com>
There's still some locations refering to AuFS;
- pkg/archive: I suspect most of that code is because the whiteout-files
are modelled after aufs (but possibly some code is only relevant to
images created with AuFS as storage driver; to be looked into).
- contrib/apparmor/template: likely some rules can be removed
- contrib/dockerize-disk.sh: very old contribution, and unlikely used
by anyone, but perhaps could be updated if we want to (or just removed).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This const looks to only be there for "convenience", or _possibly_ was created
with future normalization or special handling in mind.
In either case, currently it is just a direct copy (alias) for runtime.GOOS,
and defining our own type for this gives the impression that it's more than
that. It's only used in a single place, and there's no external consumers, so
let's deprecate this const, and use runtime.GOOS instead.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Commit 6a516acb2e moved the MemInfo type and
ReadMemInfo() function into the pkg/sysinfo package. In an attempt to assist
consumers of these to migrate to the new location, an alias was added.
Unfortunately, the side effect of this alias is that pkg/system now depends
on pkg/sysinfo, which means that consumers of this (such as docker/cli) now
get all (indirect) dependencies of that package as dependency, which includes
many dependencies that should only be needed for the daemon / runtime;
- github.com/cilium/ebpf
- github.com/containerd/cgroups
- github.com/coreos/go-systemd/v22
- github.com/godbus/dbus/v5
- github.com/moby/sys/mountinfo
- github.com/opencontainers/runtime-spec
This patch moves the MemInfo related code to its own package. As the previous move
was not yet part of a release, we're not adding new aliases in pkg/sysinfo.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These types and functions are more closely related to the functionality
provided by pkg/systeminfo, and used in conjunction with the other functions
in that package, so moving them there.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Previously, we only printed a warning if a storage driver was deprecated. The
intent was to continue supporting these drivers, to allow users to migrate
to a different storage driver.
This patch changes the behavior; if the user has no storage driver specified
in the daemon configuration (so if we try to detect the previous storage
driver based on what's present in /var/lib/docker), we now produce an error,
informing the user that the storage driver is deprecated (and to be removed),
as well as instructing them to change the daemon configuration to explicitly
select the storage driver (to allow them to migrate).
This should make the deprecation more visible; this will be disruptive, but
it's better to have the failure happening *now* (while the drivers are still
there), than for users to discover the storage driver is no longer there
(which would require them to *downgrade* the daemon in order to migrate
to a different driver).
With this change, `docker info` includes a link in the warnings that:
/ # docker info
Client:
Context: default
Debug Mode: false
Server:
...
Live Restore Enabled: false
WARNING: The overlay storage-driver is deprecated, and will be removed in a future release.
Refer to the documentation for more information: https://docs.docker.com/go/storage-driver/
When starting the daemon without a storage driver configured explicitly, but
previous state was using a deprecated driver, the error is both logged and
printed:
...
ERRO[2022-03-25T14:14:06.032014013Z] [graphdriver] prior storage driver overlay is deprecated and will be removed in a future release; update the the daemon configuration and explicitly choose this storage driver to continue using it; visit https://docs.docker.com/go/storage-driver/ for more information
...
failed to start daemon: error initializing graphdriver: prior storage driver overlay is deprecated and will be removed in a future release; update the the daemon configuration and explicitly choose this storage driver to continue using it; visit https://docs.docker.com/go/storage-driver/ for more information
When starting the daemon and explicitly configuring it with a deprecated storage
driver:
WARN[2022-03-25T14:15:59.042335412Z] [graphdriver] WARNING: the overlay storage-driver is deprecated and will be removed in a future release; visit https://docs.docker.com/go/storage-driver/ for more information
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This makes it more inline with other data we collect, and can be used to make
some info optional at some point.
fillDebugInfo sets the current debugging state of the daemon, and additional
debugging information, such as the number of Go-routines, and file descriptors.
Note that this currently always collects the information, but the CLI only
prints it if the daemon has debug enabled. We should consider to either make
this information optional (cli to request "with debugging information"), or
only collect it if the daemon has debug enabled. For the CLI code, see
https://github.com/docker/cli/blob/v20.10.12/cli/command/system/info.go#L239-L244
Additional note: the CLI considers info.SystemTime debugging information. This
felt a bit "odd" (daemon time could be useful for standard use), so I left this
out of this function.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These are used internally only, and set by daemon.NewDaemon(). If they're
used externally, we should add an accessor added (which may be something
we want to do for daemon.registryService (which should be its own backend)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This makes it more inline with other data we collect, and can be used to
make some info optional at some point.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This allows configuring the daemon's proxy server through the daemon.json con-
figuration file or command-line flags configuration file, in addition to the
existing option (through environment variables).
Configuring environment variables on Windows to configure a service is more
complicated than on Linux, and adding alternatives for this to the daemon con-
figuration makes the configuration more transparent and easier to use.
The configuration as set through command-line flags or through the daemon.json
configuration file takes precedence over env-vars in the daemon's environment,
which allows the daemon to use a different proxy. If both command-line flags
and a daemon.json configuration option is set, an error is produced when starting
the daemon.
Note that this configuration is not "live reloadable" due to Golang's use of
`sync.Once()` for proxy configuration, which means that changing the proxy
configuration requires a restart of the daemon (reload / SIGHUP will not update
the configuration.
With this patch:
cat /etc/docker/daemon.json
{
"http-proxy": "http://proxytest.example.com:80",
"https-proxy": "https://proxytest.example.com:443"
}
docker pull busybox
Using default tag: latest
Error response from daemon: Get "https://registry-1.docker.io/v2/": proxyconnect tcp: dial tcp: lookup proxytest.example.com on 127.0.0.11:53: no such host
docker build .
Sending build context to Docker daemon 89.28MB
Step 1/3 : FROM golang:1.16-alpine AS base
Get "https://registry-1.docker.io/v2/": proxyconnect tcp: dial tcp: lookup proxytest.example.com on 127.0.0.11:53: no such host
Integration tests were added to test the behavior:
- verify that the configuration through all means are used (env-var,
command-line flags, damon.json), and used in the expected order of
preference.
- verify that conflicting options produce an error.
Signed-off-by: Anca Iordache <anca.iordache@docker.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This makes sure that the value set in the daemon can be used as-is,
without having to replicate the normalization logic elsewhere.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The "quiet" argument was only used in a single place (at daemon startup), and
every other use had to pass "false" to prevent this function from logging
warnings.
Now that SysInfo contains the warnings that occurred when collecting the
system information, we can make leave it up to the caller to use those
warnings (and log them if wanted).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- Using "/go/" redirects for some topics, which allows us to
redirect to new locations if topics are moved around in the
documentation.
- Updated some old URLs to their new location.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
People keep doing this and getting pwned because they accidentally left
it exposed to the internet.
The warning about doing this has been there forever.
This introduces a sleep after warning.
To disable the extra sleep users must explicitly specify `--tls=false`
or `--tlsverify=false`
Warning also specifies this sleep will be removed in the next release
where the flag will be required if running unauthenticated.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
In dockerd we already have a concept of a "runtime", which specifies the
OCI runtime to use (e.g. runc).
This PR extends that config to add containerd shim configuration.
This option is only exposed within the daemon itself (cannot be
configured in daemon.json).
This is due to issues in supporting unknown shims which will require
more design work.
What this change allows us to do is keep all the runtime config in one
place.
So the default "runc" runtime will just have it's already existing shim
config codified within the runtime config alone.
I've also added 2 more "stock" runtimes which are basically runc+shimv1
and runc+shimv2.
These new runtime configurations are:
- io.containerd.runtime.v1.linux - runc + v1 shim using the V1 shim API
- io.containerd.runc.v2 - runc + shim v2
These names coincide with the actual names of the containerd shims.
This allows the user to essentially control what shim is going to be
used by either specifying these as a `--runtime` on container create or
by setting `--default-runtime` on the daemon.
For custom/user-specified runtimes, the default shim config (currently
shim v1) is used.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
The `docker/go-connections` package was only used for a quite generic utility.
This patch removes the use of the package by replacing the `GetProxyEnv` utility with
a local function that's based on the one in golang.org/x/net/http/httpproxy:
c21de06aaf/http/httpproxy/proxy.go (L100-L107)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Format the source according to latest goimports.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
