Before this change, each BFC child that established an FC root was laid
out at least twice: the first time to perform a normal layout, and the
second time to perform an intrinsic layout to determine the automatic
content height. With this change, we avoid the second run by querying
the formatting context for the height it used after performing the
normal layout.
The `calculate_inner_width()` and `calculate_inner_height()` resolve
percentage paddings using the width returned by
`containing_block_width_for()`. However, this function does not account
for grids where the containing block is defined by the grid area to
which an item belongs.
This change fixes the issue by modifying `calculate_inner_width()` and
`calculate_inner_height()` to use the already resolved paddings from the
layout state. Corresponding changes ensure that paddings are resolved
and saved in the state before box-sizing is handled.
As a side effect, this change also improves abspos layout for BFC where
now paddings are resolved using padding box of containing block instead
of content box of containing block.
Fixes yet another case of GFC bug, where Node::containing_block() should
not be used for grid items, because their containing block is grid area
which is not represented in layout tree.
We currently implement the official cookie RFC, which was last updated
in 2011. Unfortunately, web reality conflicts with the RFC. For example,
all of the major browsers allow nameless cookies, which the RFC forbids.
There has since been draft versions of the RFC published to address such
issues. This patch implements the latest draft.
Major differences include:
* Allowing nameless or valueless (but not both) cookies
* Formal cookie length limits
* Formal same-site rules (not fully implemented here)
* More rules around cookie domains
This is one of the few endpoints that does not ensure a top-level BC is
open. It's a bit of an implementation-defined endpoint, so let's protect
against a non-existent BC explicitly.
Reftest screenshots are now captured using the dimensions specified in
the draw a bounding box from the framebuffer AO defined in the
WebDriver specification.
Although the parameter is named "available size," it is always supposed
to represent the containing block size whenever it has a definite value.
Therefore, it is possible to simply use this value instead of performing
a containing block lookup.
This change actually improves correctness for grid items whose
containing block is defined by the grid area, as
`Node::containing_block()` does not account for this.
Our abspos layout code assumes that available space is containing block
size, so this change aligns us with the spec by using grid area for this
value.
This change does not have attached test because it is required for
upcoming fix in calculate_inner_height() that will reveal the problem.
compute_width() could never be invoked for abspos boxes because they
are skipped during normal layout and processed in
parent_context_did_dimension_child_root_box()
All places where text shaping happens, the callback is used to simply
append a glyph into the end of glyphs vector. This change removes the
callback parameter and makes the text shaping function return a glyph
run.
When we create a WebDriverConnection object, we currently hand it the
page client for which it was opened, and perform all actions on that
client. However, some WebDriver endpoints change the browsing context
(and therefore page client) on which future commands should be executed.
For example, the switch-frame endpoint will switch the current browsing
context to a frame/iframe context.
This patch implements the current browsing context (and current top-
level browsing context) concepts. They are initialized to that of the
original page. Most of this patch is making sure we execute actions on
the correct context.
We currently spin the platform event loop while awaiting scripts to
complete. This causes WebContent to hang if another component is also
spinning the event loop. The particular example that instigated this
patch was the navigable's navigation loop (which spins until the fetch
process is complete), triggered by a form submission to an iframe.
So instead of spinning, we now return immediately from the script
executors, after setting up listeners for either the script's promise to
be resolved or for a timeout. The HTTP request to WebDriver must finish
synchronously though, so now the WebDriver process spins its event loop
until WebContent signals that the script completed. This should be ok -
the WebDriver process isn't expected to be doing anything else in the
meantime.
Also, as a consequence of these changes, we now actually handle time
outs. We were previously creating the timeout timer, but not starting
it.
Use this cached pointer to the containing block's used values when
obviously possible. This avoids a hash lookup each time, and these
hash lookups do show up in profiles.
Change try_compute_width() to check whether min-width/max-width or width
is auto instead of always using `computed_values.width()`.
`grid/min-max-content.html` test is affected but it's progression.
UI event handlers currently return a boolean where false means the event
was cancelled by a script on the page, or otherwise dropped. It has been
a point of confusion for some time now, as it's not particularly clear
what should be returned in some special cases, or how the UI process
should handle the response.
This adds an enumeration with a few states that indicate exactly how the
WebContent process handled the event. This should remove all ambiguity,
and let us properly handle these states going forward.
There should be no behavior change with this patch. It's meant to only
introduce the enum, not change any of our decisions based on the result.
Logging a parse error when the attribute is not present, is not useful,
but does fill the debug log with errors that hide any real parsing
errors. This patch introduces an early-out in this situation to prevent
this spam.
The following spec algorithms had changed since we implemented them:
- "parse a sizes attribute"
- "update the source set"
- "create a source set"
This commit brings them up to date, as well as adding some additional
logging when parsing the sizes attribute fails in some way.
Before this change, a formatting context was responsible for layout of
absolutely positioned boxes whose FC root box was their parent (either
directly or indirectly). This only worked correctly when the containing
block of the absolutely positioned child did not escape the FC root.
This is because the width and height of an absolutely positioned box are
resolved based on the size of its containing block, so we needed to
ensure that the containing block's layout was completed before laying
out an absolutely positioned box.
With this change, the layout of absolutely positioned boxes is delayed
until the FC responsible for the containing block's layout is complete.
This has affected the way we calculate the static position. It is no
longer possible to ask the FC for a box's static position, as this FC's
state might be gone by the time the layout for absolutely positioned
elements occurs. Instead, the "static position rectangle" (a concept
from the spec) is saved in the layout state, along with information on
how to align the box within this rectangle when its width and height are
resolved.
Absolutely positioned boxes do not affect the size of the formatting
context box they belong to, so it's safe to skip their layout entirely
when calculating intrinsic size.
FormattingContext::run() does not allow reentrancy, so it's safe to
save and access layout mode from FC object. This avoids need to drill it
through methods of a formatting context and makes it clear that this
value could never be changed after FC construction.
Root formatting context box is passed into constructor and saved in FC,
so it's possible to access it from there instead of passing the same
box into run().
This change takes all existing WebIDL files in the repo that had
definition lines without four leading spaces, and fixes them so they
have four leading spaces.
This change ensures that the value sanitization algorithm is run and
the text cursor is set to the correct position when the type attribute
of an input is changed.
Instead of throwing all pseudo-element rules in one bucket, let's have
one bucket per pseudo-element.
This means we only run ::before rules for ::before pseudo-elements,
only ::after rules for ::after, etc.
Average style update time on https://tailwindcss.com/ 250ms -> 215ms.
Once we know the final value of the `content` property for a
pseudo-element, we can bail early if the value is `none` or `normal`
(note that `normal` only applies to ::before and ::after).
In those cases, no pseudo-element will be generated, so everything
that follows in StyleComputer would be wasted work.
This noticeably improves performance on many pages, such as
https://tailwindcss.com/ where style updates go from 360ms -> 250ms.
This makes the way we've implemented the CSS `revert` keyword a lot less
expensive.
Until now, we were making a deep copy of all property values at the
start of each cascade origin. (Those are the values that `revert` would
bring us back to if encountered.)
With this patch, the revert property set becomes a shallow copy, and we
only clone the property set if the cascade ends up writing something.
This knocks a 5% profile item down to 1.3% on https://tailwindcss.com
Instead of asking Skia for the family name every time we're called,
just cache the string once and make subsequent calls fast.
This knocks a 3.2% item off the profile entirely on
https://tailwindcss.com (at least on macOS with the CoreText backend)
This brings back the optimization we had in the old OpenType
implementation where we cache lookup tables for code point / glyph ID
mappings.
This noticeably improves performance on https://tailwindcss.com/ by
knocking an 8% profile item down to 0.2%. :^)
Skia is more permissive when it comes to font loading, compared to our
own OpenType implementation, which it has superseded, parsing an invalid
TTF does not result in an error but rather produces a font that is
incorrectly displayed. This change updates the FontLoader to address
this behavior and to stop attempting to parse a font as a last resort
when format detection has failed.
Fixes regression on x.com when text is not displayed introduced in
a9d5a99568
Also, remove blank lines. (https://w3c.github.io/aria/#ARIAMixin source
doesn’t have any blank lines, and it’s not clear that the blank lines in
ours follow any intended structure/logic.)
This change adds the [CEReactions] attributes to all ARIA attributes in
the ARIAMixin WebIDL — as required by the WebIDL in the current spec at
https://w3c.github.io/aria/#ARIAMixin, and by the WPT test case at
http://wpt.live/custom-elements/reactions/AriaMixin-string-attributes.html,
and as implemented in other existing engines.
Otherwise, without this change, Ladybird doesn’t conform to the current
spec, fails all those tests, and isn’t interoperable with other engines.
If grid-template-rows or grid-template-columns queried for a box that is
not a grid container, the result should be computed value instead of
null.
Fixes crashing in inspector.
Instead of only bucketing these by class name, let's also bucket by
tag name and ID.
Reduces the number of selectors evaluated on https://tailwindcss.com/
from 2.9% to 1.9%.
By filtering first, we end up allocating much less vector space
most of the time.
This is mostly helpful in pathological cases where there's a huge number
of rules present, but most of them get rejected early.
Previously, there was a bug in the specification that would cause an
assertion failure, due to the abort event being fired before all
dependent signals were aborted.
That's awkward, but getComputedStyle needs to return used track values
for gridTemplateColumns and gridTemplateRows properties. This change
implements it by saving style values with used values into layout state,
so it could be assigned to paintables during LayoutState::commit() and
later accessed by style_value_for_property().
I haven't seen it used in the wild, but WPT grid tests extensively use
it. For example this change helps to go from 0/10 to 8/10 on this test:
https://wpt.live/css/css-grid/layout-algorithm/grid-fit-content-percentage.html
Before this change, the ancestor filter would only reject rules that
required a certain set of descendant strings (class, ID or tag name)
to be present in the current element's ancestor chain.
An immediate child is also a descendant, so we can include this
relationship in the ancestor filter as well.
This substantially improves the efficiency of the ancestor filter on
websites using Tailwind CSS.
For example, https://tailwindcss.com/ itself goes from full style
updates taking ~1400ms to ~350ms. Still *way* too long, but a huge
improvement nonetheless.
By bucketing these seletors by class or ID, we can avoid running them
in more cases.
Before, we were only avoiding them if the context element wasn't a div.
Now we avoid them for any element that doesn't have that specific class
or ID.
This reduces the number of selectors ran on https://vercel.com by a bit
more, from 1.90% to 1.65%.
These are just roundabout ways of writing .foo, so we can still put them
in the rules-by-class bucket and skip running them when the element
doesn't have that class.
Note that :is(.foo .bar) is also bucketed as a class rule, since the
context element must have the `bar` class for the selector to match.
This is a massive speedup on https://vercel.com/ as it cuts the number
of selectors we actually evaluate from 7.0% to 1.9%.
Fixes implementation of the following line from the spec:
"However, limit the growth of any fit-content() tracks by their
fit-content() argument."
Now we correctly apply a limit to increased growth limit rather than to
the planned increase.
Change in "Tests/LibWeb/Layout/input/grid/fit-content-2.html" is a
progression and "Item as wide as the content." is actually as wide as a
content.
Fixes a bug when "'Await' expression is not allowed in formal parameters
of an async function" is thrown for "await" encountered in a function
definition assigned to a default function parameter.
Fixes loading of https://excalidraw.com/
Added the following Routes, IPC definitions, and boilerplates for the
missing endpoints:
- Switch To Frame
- Switch To Parent Frame
- Element Clear
- Element Send Keys
Getting the first font in a font cascade list with an empty font list
results in an OOTB index error. If the font list is empty, the last
resort font should be returned instead.
This didn't make any sense, and was already handled by pushing a new
execution context anyway.
By simply removing these bogus lines of code, we fix a bug where
throwing inside a function whose bytecode was shorter than the calling
function would crash trying to generate an Error stack trace (because
the bytecode offset we were trying to symbolicate was actually from
the longer caller function, and not valid in the callee function.)
This makes --log-all-js-exceptions less crash prone and more helpful.
This permits the user to use shift and the arrow/home/end keys to mutate
the document selection. Arrow key presses on non-editable text without
the shift key held has no effect.
This behavior differs browser-to-browser. The behavior here most closely
matches Firefox, though all browsers support this to some degree.
When the user clicks on a text node, the event handler sets the cursor
position to the location that was clicked. But it would then be set back
to 0 in the DOM node's focus handler. Leave the cursor alone, unless the
the DOM node was never set as the cursor position node (which will occur
when the user clicks on the DOM node, but outside the shadow text node).
In that case, move the cursor to the end of the text node.
The end result here is that the cursor is placed where the user clicked,
or set to the end of node if the user clicked outside of the shadow text
node.
This allows rendering the elements with a dark color in dark mode. We
must also assign a `fill` color to the <select> element's chevron SVG
to match the text color.
When setting an element attribute to the value it already had, we don't
need to update style or invalidate anything that depends on the DOM
version counter.
This was a source of much pointless busywork.
You can now build with STYLE_INVALIDATION_DEBUG and get a debug stream
of reasons why style invalidations are happening and where.
I've rewritten this code many times, so instead of throwing it away once
again, I figured we should at least have it behind a flag.
It would be nice if we could somehow move this work to the GPU, but even
with some basic local optimization (mostly coalescing bounds checks and
inlining pixel data access), this knocks a 13% item down to 9% in a
profile of loading https://vercel.com/
When accessed on the root/document element, the following properties are
derived from the viewport, not layout-dependent metrics:
- scrollLeft
- scrollTop
- scrollWidth
- scrollHeight
We now avoid synchronous layout in such cases. This was causing some
unnecessary layout work when loading https://vercel.com/
Before this change, we were cascading custom properties for each layer,
and then replacing any previously cascaded properties for the element
with only the set from this latest layer.
The patch fixes the issue by making each pass of the custom property
cascade add to the same set, and then finally assigning that set of
properties to the element.
Looking at the spec it doesn't seem like there's a chance for a service
worker client to be an environment but not an environment settings
object. In the case that that changes in the implementation, we can
move it.
This API is a relic from the time when it was important for objects to
have easy access to the Window, and to know it was the global object.
We now have more spec-related concepts like relevant_global_object and
current_global_object to pull the Window out of thin air.
This adds a storage tab which contains just a cookie viewer for now. In
the future, storage like Local Storage and Indexed DB can be added here
as well.
In this patch, the cookie table is read-only.
Cookies are typically deleted by setting their expiry time to an ancient
time stamp (i.e. this is how WebDriver is required to delete cookies).
Previously, we would update the cookie in the cookie jar, which would
mark the cookie as dirty. We would then purge expired cookies from the
jar's transient storage, which removed the cookie from the dirty list.
If the cookie was also in the persisted storage, it would never become
expired there as it was no longer in the dirty list when the timer for
synchronization fired.
Now, we don't remove any cookies from the transient dirty list when we
purge expired cookies. We hold onto the dirty cookie until sync time,
where we now update the cookie in the persisted storage *before* we
delete expired cookies.
It's getting a bit unwieldy to maintain as an inlined string. Move it to
its own file so it can be edited with syntax highlighting and other IDE
features.
This change makes the aria-relevant content attribute the ariaRelevant
IDL/DOM attribute get reflected — which makes the Ladybird behavior
interoperable with the implemented behavior in other existing engines.
Otherwise, without this change, Ladybird fails the relevant test case in
https://wpt.fyi/results/html/dom/aria-attribute-reflection.html — which
other existing engines all pass.
Before this change, we were only checking for actual glyph containment
in a font if unicode ranges were specified. However that is not
sufficient for emoji support, where we want to continue searching for
a font until one containing emojis is found.
This change updates `ExecuteScript::execute_script()` and
`ExecuteScript::execute_script()` to bring their behavior in line with
each other and the current specification text.
Instances of the variable `timeout` have also been renamed to
`timeout_ms`, for clarity.
I didn't want to add another set of boilerplatey tree-walking methods,
so here's a general-purpose one. :^)
`for_each_effective_rule()` walks the tree of effective style rules, and
runs the callback on each one, in either pre- or postorder. The
previous `for_each_effective_style/keyframes_rule()` methods of
`CSSStyleSheet` are then reimplemented in terms of
`for_each_effective_rule()`, and we can get rid of their equivalents
elsewhere.
Depending on usage, `@layer` has two forms, with two different CSSOM
types. One simply lists layer names and the other defines a layer with
its contained rules.
On Linux/Windows, the ctrl key is used in conjunction with arrow keys to
jump word-by-word in text documents. On macOS, the option key is used
(which is mapped to the alt key code).
The main motivator here was noticing that --disable-sql-database did not
work with AppKit. Rather than re-implementing this there, move ownership
of these classes to WebView::Application, so that each UI does not need
to individually worry about it.
A hard-coded value of 50px is too large for text boxes with a size that
is less than 50px. Reduce this to 24px, and further limit it by the size
of the overflown box.
This change should move us forward toward emoji support, as we are no
longer limited by our own OpenType implementation, which was failing
to parse the TrueType Collection format used to store emoji fonts
(at least on macOS).
This is a preparation for upcoming changes where Gfx::Typeface will
depend on `FontDatabase::should_force_fontconfig()`, so we will no
longer be able to construct typefaces from FontDatabase constructor
because of circular dependency.
Currently we rely on parser returning an error if encoded data cannot be
parsed into a valid WOFF or WOFF2 font, which is not going to be true
after switching to Skia that sometimes does not fail even if a data does
not represent a valid font.
When an editable node is focused and one of the arrow/home/end keys are
pressed while shift is held, we will now create or update the document's
selection. There is a bit of nuance to the behavior here, which matches
how the cursor behaves in other engines.
We will of course want to abstract this in the future to extend any non-
editable node text selections. This also does not implement holding ctrl
to jump by word, rather than grapheme.
When performing a hit test of type TextCursor, it would check if the
position is around each fragment and not just inside it. This resulted
in always selecting the first fragment checked.
This commit computes the distance of each hit test result, and picks the
closest one.
When deciding if the grid containers min size should be limited by a
max size. Check for a max height or width depending on the dimension,
instead of just always checking for a max width.
If a key is pressed when the media player is in focus, which causes the
media player to perform some action, that key event is no longer
propagated further.
When we want to inject a CSS counter for a line, we need to be sure to
handle if we had previously opened a styled span for the current source
substring. For example, if we see a new line in the middle of a comment,
we will have previously opened the following tag:
<span class="comment">
So when injecting a new line and the <span class="line"> element (for
CSS counters), we need to close the previous span and insert a newly
opened tag to continue using the style.
If the Downloads directory exists, we will use it (note that this will
respect the XDG_DOWNLOAD_DIR environment variable).
Otherwise, we will ask the UI layer to retrieve a download directory
from the user. This directory is not saved, so it will be re-prompted
every time. Once a proper settings UI is complete, we will of course
integrate with that for persistent settings.
In some cases, we have a timestamp as a double in milliseconds. We then
would convert it to nanoseconds as a BigInt, just to bring it back to a
double for TZDB lookups. Add an overload to avoid this needless round
trip.
Even though the underlying time zone is already cached by LibUnicode, JS
performs additional expensive lookups with that time zone. There's no
need to do those lookups again until the system time zone has changed.
Note that we can currently only use simdutf for Base64 decoding if the
provided stopBeforePartial option is loose, which is the default. There
is an open issue for simdutf to implement strict and stop-before-partial
options. Until then, for those options, we implement a slow decoder that
is written exactly as the spec steps dictate.
See: https://github.com/simdutf/simdutf/issues/440
Choosing options from the `<select>` will load and display that style
sheet's source text, with some checks to make sure that the text that
just loaded is the one we currently want.
The UI is a little goofy when scrolling, as it uses `position: sticky`
which we don't implement yet. But that's just more motivation to
implement it! :^)
This will be used by the inspector, for showing style sheet contents.
Identifying a specific style sheet is a bit tricky. Depending on where
it came from, a style sheet may have a URL, it might be associated with
a DOM element, both, or neither. This varied information is wrapped in
a new StyleSheetIdentifier struct.
This is to enable the inspector to show this source.
There's a fairly hefty FIXME here because duplicating the source text is
a significant waste of memory. But I don't want to get too sidetracked.
This is only used for CSS style sheets. One case wants it as a String,
and the others don't care, but will in future also want to have the
source as a String.
When trying to use pkgconfig for finding libjxl, the build fails
trying to link the cross-compiler's libc++.
Using this way libjxl also requires hwy library.
Findlibjxl.cmake was taken from SDL_image and altered to include its license.
Calls to `Document::set_needs_display()` and
`Paintable::set_needs_display()` now invalidate the display list by
default. This behavior can be changed by passing
`InvalidateDisplayList::No` to the function where invalidating the
display list is not necessary.
By checking the lengths and then looking directly at the bytes, the
generated code becomes a lot nicer.
This gives a 1.23x speedup when parsing the JS from x.com
Use offset from ScrollFrame which is an actual value a box is shifted by
while painting.
Also change `update_paint_and_hit_testing_properties_if_needed()` to
refresh scroll frames state, because `getBoundingClientRect()` now
depends on them.
Fixes wrong file tree sidebar location and excessive layout
invalidations caused by some miscalculation on JS-side when wrong
bounding client rect is provided on Github PR pages like
https://github.com/LadybirdBrowser/ladybird/pull/1232/files
Scroll offset of body does not affect position of fixed elements, so
nearest scrollable lookup should early return from ancestor scrollable
lookup loop once "position: fixed" box is encountered.
Fixes regression introduced in 866608532a
Otherwise, it looks a bit awkward where the cursor position does not
update while the selection is elsewhere.
Note that this requires passing along the raw selection positions from
`set the selection range` to the elements. Otherwise, consider what will
happen if we set the selection start and end to the same value. By going
through the API accessor, we hit the case where the start and end are
the same value, and return the document cursor position. This would mean
the cursor position would not be updated.
The test changes here more closely match what Firefox produces now. It
is not a 100% match; the `select event fired` test case isn't right. The
problem is the event fires for the input element, but we most recently
focused the textarea element. Thus, when we retrieve the selection from
the input element, we return the document's cursor position, which is
actually in the textarea element. The fix will ultimately be to fully
implement the following:
https://html.spec.whatwg.org/multipage/form-control-infrastructure.html#concept-textarea/input-cursor
That is, each input / textarea element should separately track its own
text cursor position.
Append text chunks to either the start or end of the text fragment,
depending on the text direction. The direction is determined by what
script its code points are from.
Implements:
"If the product of the hypothetical fr size and a flexible track’s flex
factor is less than the track’s base size, restart this algorithm
treating all such tracks as inflexible."
Fixes https://github.com/LadybirdBrowser/ladybird/issues/1211
Sticky positioning is implemented by modifying the algorithm for
assigning and refreshing scroll frames. Now, elements with
"position: sticky" are assigned their own scroll frame, and their
position is refreshed independently from regular scroll boxes.
Refreshing the scroll offsets for sticky boxes does not require display
list invalidation.
A separate hash map is used for the scroll frames of sticky boxes. This
is necessary because a single paintable box can have two scroll frames
if it 1) has "position: sticky" and 2) contains scrollable overflow.
This allows the calculation of the cumulative scroll offset for a scroll
frame by adding its scroll offset to the parent’s scroll offset, rather
than traversing the containing block chain. While it doesn't greatly
simplify calculations for typical scroll frames, it serves as a
preparation for supporting "position: sticky".
This change is intended to insure that the thumb control on the dialog
will never be narrower than 50 pixels no matter how long the line it's
displaying.
This commit just adds a command line option to case-insensitively accept
a User-Agent name to use as the UA override. The UIs will individually
need to make use of this option.
Before this change, we were hard-coding 4 KiB. This meant that systems
with a 16 KiB native page size were wasting 12 KiB per HeapBlock on
nothing, leading to worse locality and more mmap/madvise churn.
We now query the system page size on startup and use that as the
HeapBlock size.
The only downside here is that some of the pointer math for finding the
base of a HeapBlock now has to use a runtime computed value instead of a
compile time constant. But that's a small price to pay for what we get.
According to https://www.w3.org/TR/css-grid-2/#placement-shorthands
when setting the 'grid-row' and 'grid-column' shorthand property to a
single <custom-ident> value, both 'grid-row-start'/'grid-column-start'
and 'grid-row-end'/'grid-column-end' should be set to that
<custom_ident>.
And add tests! This implementation closely follows the current C++
implementation, replacing macros and gotos with a slightly more
complex state machine. It's very possible that an async version that
yields tokens on "emit" would be even simpler, but let's get this
one working first :).
Also give the Swift.String init routines an explict label when
constructing from AK String types, as this caused issues in a later
commit to have them both with `_ data`.
In particular, there was an assertion failure due to the temporary
parser document's "about base URL" being empty when trying to "parse a
URL" during parsing.
We fix this by copying the context element's document's about base URL
to the temporary parsing document while parsing a fragment.
This fixes a crash when loading search results on https://amazon.com/
Adjust the translation from Gfx::ScalingMode to Skia SkFilterMode, so
that CSS::ImageRendering::Pixelated will result in
SkFilterMode::kNearest.
Before:
ScalingMode::SmoothPixels -> kLinear
After:
ScalingMode::SmoothPixels -> kNearest
Fixes#1170
At the same time, simplify CMakeLists magic for libraries that want to
include Swift code in the library. The Lib-less name of the library is
now always the module name for the library with any Swift additions,
extensions, etc. All vfs overlays now live in a common location to make
finding them easier from CMake functions. A new pattern is needed for
the Lib-less modules to re-export their Cxx counterparts.
This causes UI interactions with the document selection to also update
the input and textarea DOM selection state. Note that we switch around
the order of focusing a DOM node and setting the selection, so we allow
the focus event to override whatever selection we came up with.
For both types of elements, `.selectionStart`, `.selectionEnd`,
`.selectionDirection`, `.setSelectionRange()`, `.select()` and the
`select` event are now implemented.
