I believe this is an error in the UI Events spec, and it should be
updated to match the HTML spec (which uses WindowProxy everywhere).
This fixes a bunch of issues already covered by existing WPT tests.
Spec bug: https://github.com/w3c/uievents/issues/388
Note that WebKit has been using WindowProxy instead of Window in
UI Events IDL since 2018:
816158b4aa
These compressors will be used by w3c's CompressionStream, which can run
arbitrary JS, and thus never reach their "finish" steps. Let's not crash
the WebContent process if that happens.
GzipCompressor is currently written assuming that it's write_some method
is only called once. When we use this class for LibWeb, we may very well
receive data to compress in small chunks. So this patch makes us write
the gzip header and footer only once, which now resembles the zlib and
deflate compressors.
Some LibCompress API changes for LibWeb will make these utilities a bit
difficult to keep up to date. Given that these are unused anways, let's
just not bother.
TL;DR: There are two available sets of coefficients for the conversion
matrices from XYZ to sRGB. We switched from one set to the other, which
is what the WPT tests are expecting.
All RGB color spaces, like display-p3 or rec2020, are defined by their
three color chromacities and a white point. This is also the case for
the video color space Rec. 709, from which the sRGB color space is
derived. The sRGB specification is however a bit different.
In 1996, when formalizing the sRGB spec the authors published a draft
that is still available here [1]. In this document, they also provide
the matrix to convert from the XYZ color space to sRGB. This matrix can
be verified quite easily by using the usual math equations. But hold on,
here come the plot twist: at the time of publication, the spec contained
a different matrix than the one in the draft (the spec is obviously
behind a pay wall, but the numbers are also reported in this official
document [2]). This official matrix, is at a first glance simply a
wrongly rounded version of the one in the draft publication. It however
has some interesting properties: it can be inverted twice (so a
roundtrip) in 8 bits and not suffer from any errors from the
calculations.
So, we are here with two versions of the XYZ -> sRGB matrix, the one
from the spec, which is:
- better for computations in 8 bits,
- and official. This is the one that, by authority, we should use.
And a second version, that can be found in the draft, which:
- makes sense, as directly derived from the chromacities,
- is publicly available,
- and (thus?) used in most places.
The old coefficients were the one from the spec, this commit change them
for the one derived from the mathematical formulae. The Python script to
compute these values is available at the end of the commit description.
More details about this subject can be found here [3].
[1] https://www.w3.org/Graphics/Color/sRGB.html
[2] https://color.org/chardata/rgb/sRGB.pdf
[3] https://photosauce.net/blog/post/making-a-minimal-srgb-icc-profile-part-3-choose-your-colors-carefully
The Python script:
```python
# http://www.brucelindbloom.com/index.html?Eqn_RGB_XYZ_Matrix.html
from numpy.typing import NDArray
import numpy as np
### sRGB
# https://www.w3.org/TR/css-color-4/#predefined-sRGB
srgb_r_chromacity = np.array([0.640, 0.330])
srgb_g_chromacity = np.array([0.300, 0.600])
srgb_b_chromacity = np.array([0.150, 0.060])
##
## White points
white_point_d50 = np.array([0.345700, 0.358500])
white_point_d65 = np.array([0.312700, 0.329000])
#
r_chromacity = srgb_r_chromacity
g_chromacity = srgb_g_chromacity
b_chromacity = srgb_b_chromacity
white_point = white_point_d65
def tristmimulus_vector(chromacity: NDArray) -> NDArray:
return np.array([
chromacity[0] /chromacity[1],
1,
(1 - chromacity[0] - chromacity[1]) / chromacity[1]
])
tristmimulus_matrix = np.hstack((
tristmimulus_vector(r_chromacity).reshape(3, 1),
tristmimulus_vector(g_chromacity).reshape(3, 1),
tristmimulus_vector(b_chromacity).reshape(3, 1),
))
scaling_factors = (np.linalg.inv(tristmimulus_matrix) @
tristmimulus_vector(white_point))
M = tristmimulus_matrix * scaling_factors
np.set_printoptions(formatter={'float_kind':'{:.6f}'.format})
xyz_65_to_srgb = np.linalg.inv(M)
# http://www.brucelindbloom.com/index.html?Eqn_ChromAdapt.html
# Let's convert from D50 to D65 using the Bradford method.
m_a = np.array([
[0.8951000, 0.2664000, -0.1614000],
[-0.7502000, 1.7135000, 0.0367000],
[0.0389000, -0.0685000, 1.0296000]
])
cone_response_source = m_a @ tristmimulus_vector(white_point_d50)
cone_response_destination = m_a @ tristmimulus_vector(white_point_d65)
cone_response_ratio = cone_response_destination / cone_response_source
m = np.linalg.inv(m_a) @ np.diagflat(cone_response_ratio) @ m_a
D50_to_D65 = m
xyz_50_to_srgb = xyz_65_to_srgb @ D50_to_D65
print(xyz_50_to_srgb)
print(xyz_65_to_srgb)
```
fe46b2c141 added the reset-temp-inverse flag, but set it up so all
tempinverse ops were negated at the start of the next op; this commit
makes it so these flags actually persist for one op and not zero.
Fixes#2296.
We were previously throwing an exception if the generated code was
throwing an exception before it hit the implementation of the interface.
Instead, we are meant to catch any exception, and wrap that in a
rejected promise.
For example, this was impacting the fixed test in this commit as an
exception was being thrown when invoking WebIDL::convert_to_int<T>
as the given number was out of range, and the [EnforceRange]
extended attribute decorates that attribute.
This same type of case is seen for a few tests in WPT.
This change ensures that:
- if an element for which an accessible name otherwise wouldn’t be
computed is referenced in an aria-labelledby value, the accessible
name for the element will be computed as expected.
- if an element has both an aria-label value and also an
aria-labelledby value, the text from the aria-label value gets
included in the computation of the element’s accessible name.
Otherwise, without this change, some elements with aria-labelledby
values will unexpectedly end up without accessible names, and some
elements with aria-label values will unexpectedly not have that
aria-label value included in the element’s accessible name.
This color space is often used as a reference in WPT tests, having
support for it makes us pass 15 new tests:
- css/css-color/rec2020-001.html
- css/css-color/rec2020-002.html
- css/css-color/rec2020-003.html
- css/css-color/rec2020-004.html
- css/css-color/rec2020-005.html
- css/css-color/predefined-011.html
- css/css-color/predefined-012.html
That makes us pass the following WPT tests:
- css/css-color/prophoto-rgb-001.html
- css/css-color/prophoto-rgb-002.html
- css/css-color/prophoto-rgb-003.html
- css/css-color/prophoto-rgb-004.html
- css/css-color/prophoto-rgb-005.html
- css/css-color/predefined-009.html
- css/css-color/predefined-010.html
This color space is often used as a reference in WPT tests, having
support for it makes us pass 15 new tests:
- css/css-color/display-p3-001.html
- css/css-color/display-p3-002.html
- css/css-color/display-p3-003.html
- css/css-color/display-p3-004.html
- css/css-color/display-p3-005.html
- css/css-color/display-p3-006.html
- css/css-color/lab-008.html
- css/css-color/lch-008.html
- css/css-color/oklab-008.html
- css/css-color/oklch-008.html
- css/css-color/predefined-005.html
- css/css-color/predefined-006.html
- css/css-color/xyz-005.html
- css/css-color/xyz-d50-005.html
- css/css-color/xyz-d65-005.html
This makes us pass the following WPT tests:
- css/css-color/a98rgb-001.html
- css/css-color/a98rgb-002.html
- css/css-color/a98rgb-003.html
- css/css-color/a98rgb-004.html
- css/css-color/predefined-007.html
- css/css-color/predefined-008.html
In commit 1b82cb43c2 I accidentally
removed the paint transformation altogether. The result was that
zoomed-in SVGs, or SVG elements with a transformation applied could have
their gradient coordinates misplaced significantly.
This was also exposed in the `svg-text-effects` test by way of a slight
visual difference. Add a new test that very clearly exposes the fixed
issue by rotating the gradient coordinates by 45 degrees.
In #1537, determine_the_origin() changed to take
`Optional<URL::URL> const&` as first parameter, but it's passed
`Web::Fetch::Infrastructure::Response::url()`, which returns
`Optional<URL::URL const&>`. Ladybird does not have
SerenityOS/serenity#22870 (yet?), so this mismatch silently creates
a copy.
Change determine_the_origin() to take `Optional<URL::URL const&>`
instead. No behavior change, saves a copy, and is probably what
was originally intended.
Before this change, a StringView with a character-data pointer would
never compare as equal to one with a null pointer, even if they were
both length 0. This could happen for example if one is
default-initialized, and the other is created as a substring.
The WebSocket spec tells us to queue tasks instead of firing events
synchronously at WebSockets, so this commit does exactly that.
The way we've implemented web sockets means that the work is spread
across multiple libraries and even processes, which is why it doesn't
look like the spec verbatim.
That makes us pass the following WPT tests:
- css/css-color/srgb-linear-001.html
- css/css-color/srgb-linear-002.html
- css/css-color/srgb-linear-003.html
