For `IntRect`, we assume that the right/bottom edge is offset by minus
one. This obviously will not work for `FloatRect`, since those edges are
infinitely small.
Specialize `right()` and `bottom()` and add a `FIXME` to get rid of the
offset in the future.
Adds support for grid items with fixed size paddings. Supporting
percentage paddings will probably require to do second pass of tracks
layout: second pass is needed to recalculate tracks sizes when final
items sizes are known when percentage paddings are already resolved.
This commit also modifies the behavior of the `-z` option, so that a
'\0' character now delimits output lines, as well as input lines. This
matches the behavior of the GNU coreutils and FreeBSD implementations
of shuf.
This generic stream wrapper performs checksum calculations on all data
passed through it for reading or writing, and is therefore convenient
for calculating checksums while performing normal data input/output, as
well as computing streaming checksums on non-seekable streams.
The implementation of this is naive enough so it can handle all 8-bit
CRC polynomials, of which there are quite a few. The table generation
and update procedure is MSB first, which is backwards from the LSB first
method of CRC32.
See identical code in LittleEndianBitStream; even in the bytewise
reading BigEndianBitStream an offset of 8 is not inconsistent state and
handled just fine by read_bits.
Rather than tracking our position in the bit buffer, we can simply shift
away the bits that we read. This is mostly for simplicity, but also does
help performance a bit.
Using the "enwik8" file as a test (100MB uncompressed, commonly used in
benchmarks: https://www.mattmahoney.net/dc/enwik8.zip), compression time
decreases from:
3.96s to 3.79s on Serenity (cold)
1.08s to 1.04s on Serenity (warm)
0.83s to 0.82s on Linux
We have outln() and out(), warnln() and warn(),
now we have dbgln() and dbg().
This is useful for printing arrays element-by-element while still
only printing one line per array.
This change addresses the incorrect assumption that the available width
inside a grid item is equal to the width of the track it belongs to.
For instance, if a grid item has a width of 200px, the available width
inside that item is also 200px regardless of its column(s) base size.
To solve this issue, it was necessary to move the final resolution of
grid items to occur immediately after the final column track sizes are
determined. By doing so, it becomes possible to obtain correct
available width inside grid items while resolving the row track sizes.
These 2 are an actual separate types of syscalls, so let's stop using
special flags for bind mounting or re-mounting and instead let userspace
calling directly for this kind of actions.
The resolved property sets are stored with the element in a
per-pseudo-element array (same as for pseudo element layout nodes).
Longer term, we should stop storing this with elements entirely and make
it temporary state in StyleComputer somehow, so we don't waste memory
keeping all the resolved properties around.
This makes various gradients show up on https://shopify.com/ :^)
The goal here is to reduce the amount of WebContent client APIs that are
duplicated across every ViewImplementation. Across our three browsers,
we currently:
Ladybird - Mix some AK::Function callbacks and Qt signals to notify
tabs of WebContent events.
Browser - Use only AK::Function callbacks.
headless-browser - Drop most events on the floor.
Instead, let's only use AK::Function callbacks across all three browsers
to propagate events to tabs. This allows us to invoke those callbacks
directly from LibWebView instead of all three browsers needing to define
a trivial `if (callback) callback();` override of a LibWebView virtual
function. For headless-browser, we can simply not set these callbacks.
As a first pass, this only converts WebContent events that are trivial
to this approach. That is, events that were simply passed onto the tab
or handled without much fuss.
This is to match Browser, where ownership of all "subwidgets" is placed
on the tab as well. This further lets us align the web view callbacks to
match Browser's OOPWV as well, which will later let us move them into
the base LibWebView class.
Note that the real implementations of these functions are:
notify_server_did_output_js_console_message
notify_server_did_get_js_console_messages
Which have the same method bodies as these unused variants.
The implementations of handle_web_content_process_crash and
take_screenshot are exactly the same across Browser and Ladybird. Let's
reduce some code duplication and move them to LibWebView.
This completion only works if you have lagom already built in some
capacity, since it scans the build directory tree for binaries, removing
known false positives. However, that is both more accurate than asking
ninja for the targets and filtering those, and it also makes it
independent of the build system used.
This is very convenient for anyone like me who regularly runs the Clang
toolchain. The toolchain is not completed for Lagom and the
toolchain-independent help command.
The Multiboot header stores the framebuffer's pitch in bytes, so
multiplying it by the pixel's size is not necessary. We ended up
allocating 4 times as much memory as needed, which caused us to overlap
the MMIO reserved memory area on the Raspberry Pi.
Otherwise, the message's contents might be in the cache only, so
VideoCore will read stale/garbage data from main memory.
This fixes framebuffer setup on bare metal with the data cache enabled.
This in turn enables `./Meta/serenity.sh test aarch64` and the CI
scripts to work with the AArch64 port.
As the RPi doesn't have a debugcon-like device, we create two serial
devices. The system console, UART0 is redirected to `debug.log`, while
UART1 is made available to the userspace and is used as the stdout for
the test runner script.
We are not yet able to run the full test suite, as the kernel panics due
to some unimplemented features.
Note that Qemu `master` or our patched Qemu build is required for
`SystemServer` to recognize the `system_mode=self-test` parameter.
While the PL011-based UART0 is currently reserved for the kernel
console, UART1 is free to be exposed to the userspace as `/dev/ttyS0`.
This will be used as the stdout of `run-tests-and-shutdown.sh` when
testing the AArch64 kernel.
The Raspberry Pi hardware doesn't support a proper software-initiated
shutdown, so this instead uses the watchdog to reboot to a special
partition which the firmware interprets as an immediate halt on
shutdown. When running under Qemu, this causes the emulator to exit.
We now have everything in the AArch64 kernel to be able to use the full
`__panic` implementation, so we can share the code with x86-64.
I have kept `__assertion_failed` separate for now, as the x86-64 version
directly executes inline assembly, thus `Kernel/Arch/aarch64/Panic.cpp`
could not be removed.
This change makes grid items be responsible for their borders instead
of grid tracks which can not have borders itself.
There are changes in layout tests but those are improvements :)
