The VolumesService did not have information wether or not a volume
was _created_ or if a volume already existed in the driver, and
the existing volume was used.
As a result, multiple "create" events could be generated for the
same volume. For example:
1. Run `docker events` in a shell to start listening for events
2. Create a volume:
docker volume create myvolume
3. Start a container that uses that volume:
docker run -dit -v myvolume:/foo busybox
4. Check the events that were generated:
2021-02-15T18:49:55.874621004+01:00 volume create myvolume (driver=local)
2021-02-15T18:50:11.442759052+01:00 volume create myvolume (driver=local)
2021-02-15T18:50:11.487104176+01:00 container create 45112157c8b1382626bf5e01ef18445a4c680f3846c5e32d01775dddee8ca6d1 (image=busybox, name=gracious_hypatia)
2021-02-15T18:50:11.519288102+01:00 network connect a19f6bb8d44ff84d478670fa4e34c5bf5305f42786294d3d90e790ac74b6d3e0 (container=45112157c8b1382626bf5e01ef18445a4c680f3846c5e32d01775dddee8ca6d1, name=bridge, type=bridge)
2021-02-15T18:50:11.526407799+01:00 volume mount myvolume (container=45112157c8b1382626bf5e01ef18445a4c680f3846c5e32d01775dddee8ca6d1, destination=/foo, driver=local, propagation=, read/write=true)
2021-02-15T18:50:11.864134043+01:00 container start 45112157c8b1382626bf5e01ef18445a4c680f3846c5e32d01775dddee8ca6d1 (image=busybox, name=gracious_hypatia)
5. Notice that a "volume create" event is created twice;
- once when `docker volume create` was ran
- once when `docker run ...` was ran
This patch moves the generation of (most) events to the volume _store_, and only
generates an event if the volume did not yet exist.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This was changed as part of a refactor to use containerd dist code. The
problem is the OCI media types are not compatible with older versions of
Docker.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This test has been flaky for a long time, failing with:
--- FAIL: TestInspect (12.04s)
inspect_test.go:39: timeout hit after 10s: waiting for tasks to enter run state. task failed with error: task: non-zero exit (1)
While looking through logs, noticed tasks were started, entering RUNNING stage,
and then exited, to be started again.
state.transition="STARTING->RUNNING"
...
msg="fatal task error" error="task: non-zero exit (1)"
...
state.transition="RUNNING->FAILED"
Looking for possible reasons, first considering network issues (possibly we ran
out of IP addresses or networking not cleaned up), then I spotted the issue.
The service is started with;
Command: []string{"/bin/top"},
Args: []string{"-u", "root"},
The `-u root` is not an argument for the service, but for `/bin/top`. While the
Ubuntu/Debian/GNU version `top` has a -u/-U option;
docker run --rm ubuntu:20.04 top -h 2>&1 | grep '\-u'
top -hv | -bcEHiOSs1 -d secs -n max -u|U user -p pid(s) -o field -w [cols]
The *busybox* version of top does not:
docker run --rm busybox top --help 2>&1 | grep '\-u'
So running `top -u root` would cause the task to fail;
docker run --rm busybox top -u root
top: invalid option -- u
...
echo $?
1
As a result, the service went into a crash-loop, and because the `poll.WaitOn()`
was running with a short interval, in many cases would _just_ find the RUNNING
state, perform the `service inspect`, and pass, but in other cases, it would not
be that lucky, and continue polling untill we reached the 10 seconds timeout,
and mark the test as failed.
Looking for history of this option (was it previously using a different image?) I
found this was added in 6cd6d8646a, but probably
just missed during review.
Given that the option is only set to have "something" to inspect, I replaced
the `-u root` with `-d 5`, which makes top refresh with a 5 second interval.
Note that there is another test (`TestServiceListWithStatuses) that uses the same
spec, however, that test is skipped based on API version of the test-daemon, and
(to be looked into), when performing that check, no API version is known, causing
the test to (always?) be skipped:
=== RUN TestServiceListWithStatuses
--- SKIP: TestServiceListWithStatuses (0.00s)
list_test.go:34: versions.LessThan(testEnv.DaemonInfo.ServerVersion, "1.41")
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Some tests were using domain names that were intended to be "fake", but are
actually registered domain names (such as domain.com, registry.com, mytest.com).
Even though we were not actually making connections to these domains, it's
better to use domains that are designated for testing/examples in RFC2606:
https://tools.ietf.org/html/rfc2606
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Rootlesskit doesn't currently handle IPv6 addresses, causing TestNetworkLoopbackNat
and TestNetworkNat to fail;
Error starting userland proxy:
error while calling PortManager.AddPort(): listen tcp: address :::8080: too many colons in address
This patch:
- Updates `getExternalAddress()` to pick IPv4 address if both IPv6 and IPv4 are found
- Update TestNetworkNat to net.JoinHostPort(), so that square brackets are used for
IPv6 addresses (e.g. `[::]:8080`)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This currently doesn't make a difference, because load.FrozenImagesLinux()
currently loads all frozen images, not just the specified one, but in case
that is fixed/implemented at some point.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This fixes a panic when an admin specifies a custom default runtime,
when a plugin is started the shim config is nil.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Commit f2f5106c92 added this test to verify loading
of images that were built with user-namespaces enabled.
However, because this test spins up a new daemon, not the daemon that's set up by
the test-suite's `TestMain()` (which loads the frozen images).
As a result, the `debian:bullseye` image was pulled from Docker Hub when running
the test;
Calling POST /v1.41/images/load?quiet=1
Applying tar in /go/src/github.com/docker/docker/bundles/test-integration/TestBuildUserNamespaceValidateCapabilitiesAreV2/d4d366b15997b/root/165536.165536/overlay2/3f7f9375197667acaf7bc810b34689c21f8fed9c52c6765c032497092ca023d6/diff" storage-driver=overlay
Applied tar sha256:845f0e5159140e9dbcad00c0326c2a506fbe375aa1c229c43f082867d283149c to 3f7f9375197667acaf7bc810b34689c21f8fed9c52c6765c032497092ca023d6, size: 5922359
Calling POST /v1.41/build?buildargs=null&cachefrom=null&cgroupparent=&cpuperiod=0&cpuquota=0&cpusetcpus=&cpusetmems=&cpushares=0&dockerfile=&labels=null&memory=0&memswap=0&networkmode=&rm=0&shmsize=0&t=capabilities%3A1.0&target=&ulimits=null&version=
Trying to pull debian from https://registry-1.docker.io v2
Fetching manifest from remote" digest="sha256:f169dbadc9021fc0b08e371d50a772809286a167f62a8b6ae86e4745878d283d" error="<nil>" remote="docker.io/library/debian:bullseye
Pulling ref from V2 registry: debian:bullseye
...
This patch updates `TestBuildUserNamespaceValidateCapabilitiesAreV2` to load the
frozen image. `StartWithBusybox` is also changed to `Start`, because the test
is not using the busybox image, so there's no need to load it.
In a followup, we should probably add some utilities to make this easier to set up
(and to allow passing the list frozen images that we want to load, without having
to "hard-code" the image name to load).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Using `d.Kill()` with rootless mode causes the restarted daemon to not
be able to start containerd (it times out).
Originally this was SIGKILLing the daemon because we were hoping to not
have to manipulate on disk state, but since we need to anyway we can
shut it down normally.
I also tested this to ensure the test fails correctly without the fix
that the test was added to check for.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Adds a test case for the case where dockerd gets stuck on startup due to
hanging `daemon.shutdownContainer`
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
When building images in a user-namespaced container, v3 capabilities are
stored including the root UID of the creator of the user-namespace.
This UID does not make sense outside the build environment however. If
the image is run in a non-user-namespaced runtime, or if a user-namespaced
runtime uses a different UID, the capabilities requested by the effective
bit will not be honoured by `execve(2)` due to this mismatch.
Instead, we convert v3 capabilities to v2, dropping the root UID on the
fly.
Signed-off-by: Eric Mountain <eric.mountain@datadoghq.com>
Capabilities are serialised in VFS_CAP_REVISION_3 when an image is
built in a user-namespaced daemon, instead of VFS_CAP_REVISION_2.
This adds a test for this, though it's currently wired to fail if
the capabilities are serialised in VFS_CAP_REVISION_2 instead in this
situation, since this is unexpected.
Signed-off-by: Eric Mountain <eric.mountain@datadoghq.com>
This adds a regression test for https://github.com/moby/moby/issues/24595
make DOCKER_GRAPHDRIVER=vfs TEST_FILTER='TestNetworkList' test-integration
INFO: Testing against a local daemon
=== RUN TestNetworkList
=== RUN TestNetworkList//networks
=== PAUSE TestNetworkList//networks
=== RUN TestNetworkList//networks/
=== PAUSE TestNetworkList//networks/
=== CONT TestNetworkList//networks
=== CONT TestNetworkList//networks/
--- PASS: TestNetworkList (0.05s)
--- PASS: TestNetworkList//networks/ (0.01s)
--- PASS: TestNetworkList//networks (0.01s)
PASS
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The free disk space on the Windows RS5 CI nodes appears to be just the
right size that the TestBuildWCOWSandboxSize test can generate 21GB of
layers, and then a 21GB sandbox inside a container, and then runs out of
space while committing the layer.
Helpfully, this failure is distinguishable in the logs from a failure
when the sandbox is too small, so we can do that.
TODO: Revert this if-and-when the Windows-RS5 CI nodes have more free
space.
Signed-off-by: Paul "TBBle" Hampson <Paul.Hampson@Pobox.com>
This test validates that `RUN` and `COPY` both target a read-write
sandbox on Windows that is configured according to the daemon's
`storage-opts` setting.
Sadly, this is a slow test, so we need to bump the timeout to 60 minutes
from the default of 10 minutes.
Signed-off-by: Paul "TBBle" Hampson <Paul.Hampson@Pobox.com>
This fixes a regression based on expectations of the runtime:
```
docker pull arm32v7/alpine
docker run arm32v7/alpine
```
Without this change, the `docker run` will fail due to platform
matching on non-arm32v7 systems, even though the image could run
(assuming the system is setup correctly).
This also emits a warning to make sure that the user is aware that a
platform that does not match the default platform of the system is being
run, for the cases like:
```
docker pull --platform armhf busybox
docker run busybox
```
Not typically an issue if the requests are done together like that, but
if the image was already there and someone did `docker run` without an
explicit `--platform`, they may very well be expecting to run a native
version of the image instead of the armhf one.
This warning does add some extra noise in the case of platform specific
images being run, such as `arm32v7/alpine`, but this can be supressed by
explicitly setting the platform.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
After dicussing with maintainers, it was decided putting the burden of
providing the full cap list on the client is not a good design.
Instead we decided to follow along with the container API and use cap
add/drop.
This brings in the changes already merged into swarmkit.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
In order to run tests at mips64el device.
Now official-images has supported the following images for mips64el.
buildpack-deps:stretch
buildpack-deps:buster
debian:stretch
debian:buster
But official-images does not support the following images for mips64el.
debian:jessie
buildpack-deps:jessie
Signed-off-by: wanghuaiqing <wanghuaiqing@loongson.cn>
If the container specified in `--volumes-from` did not exist, the
API returned a 404 status, which was interpreted by the CLI as the
specified _image_ to be missing (even if that was not the case).
This patch changes these error to return a 400 (bad request);
Before this change:
# make sure the image is present
docker pull busybox
docker create --volumes-from=nosuchcontainer busybox
# Unable to find image 'busybox:latest' locally
# latest: Pulling from library/busybox
# Digest: sha256:95cf004f559831017cdf4628aaf1bb30133677be8702a8c5f2994629f637a209
# Status: Image is up to date for busybox:latest
# Error response from daemon: No such container: nosuchcontainer
After this change:
# make sure the image is present
docker pull busybox
docker create --volumes-from=nosuchcontainer busybox
# Error response from daemon: No such container: nosuchcontainer
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Usage: DOCKER_BUILD_ARGS="--build-arg CONTAINERD_COMMIT=master --build-arg RUNC_COMMIT=master" DOCKER_EXPERIMENTAL=1 TEST_SKIP_INTEGRATION_CLI=1 make test-integration
Depends on containerd master (v1.4) and runc master (v1.0.0-rc91).
Currently `TEST_SKIP_INTEGRATION_CLI=1` must be specified.
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
