This adds a new filter argument to the volume prune endpoint "all".
When this is not set, or it is a false-y value, then only anonymous
volumes are considered for pruning.
When `all` is set to a truth-y value, you get the old behavior.
This is an API change, but I think one that is what most people would
want.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This test is verifying that the container has the right options set (through
`docker inspect`), but also checks if the cgroup-rules are set within the container
by reading `/sys/fs/cgroup/devices/devices`
Unlike cgroups v1, on cgroups v2, there is no file interface, and rules are handled
through ebpf, which means that the test will fail because this file is not present.
From the Linux documentation for cgroups v2: https://github.com/torvalds/linux/blob/v5.16/Documentation/admin-guide/cgroup-v2.rst#device-controller
> (...)
> Device controller manages access to device files. It includes both creation of
> new device files (using mknod), and access to the existing device files.
>
> Cgroup v2 device controller has no interface files and is implemented on top of
> cgroup BPF. To control access to device files, a user may create bpf programs
> of type BPF_PROG_TYPE_CGROUP_DEVICE and att>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This test was disabled in the past, but re-enabled when we upgraded
docker-py to 4.2.0.
The test looks to be still flaky though, so skipping it again:
```
[2020-02-10T23:40:44.429Z] =================================== FAILURES ===================================
[2020-02-10T23:40:44.429Z] __________________ AttachContainerTest.test_attach_no_stream ___________________
[2020-02-10T23:40:44.429Z] tests/integration/api_container_test.py:1250: in test_attach_no_stream
[2020-02-10T23:40:44.429Z] assert output == 'hello\n'.encode(encoding='ascii')
[2020-02-10T23:40:44.429Z] E AssertionError: assert b'' == b'hello\n'
[2020-02-10T23:40:44.429Z] E Right contains more items, first extra item: 104
[2020-02-10T23:40:44.429Z] E Use -v to get the full diff
[2020-02-10T23:40:44.429Z] ------- generated xml file: /src/bundles/test-docker-py/junit-report.xml -------
````
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Otherwise some tests are skipped with the default API version
used:
SKIPPED [1] tests/integration/api_service_test.py:882: API version is too low (< 1.38)
SKIPPED [1] tests/integration/api_swarm_test.py:59: API version is too low (< 1.39)
SKIPPED [1] tests/integration/api_swarm_test.py:38: API version is too low (< 1.39)
SKIPPED [1] tests/integration/api_swarm_test.py:45: API version is too low (< 1.39)
SKIPPED [1] tests/integration/api_swarm_test.py:52: API version is too low (< 1.39)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The ImageCollectionTest.test_pull_multiple test performs a `docker pull` without
a `:tag` specified) to pull all tags of the given repository (image).
After pulling the image, the image(s) pulled are checked to verify if the list
of images contains the `:latest` tag.
However, the test assumes that all tags of the image are tags for the same
version of the image (same digest), and thus a *single* image is returned, which
is not always the case.
Currently, the `hello-world:latest` and `hello-world:linux` tags point to a
different digest, therefore the `client.images.pull()` returns multiple images:
one image for digest, making the test fail:
=================================== FAILURES ===================================
____________________ ImageCollectionTest.test_pull_multiple ____________________
tests/integration/models_images_test.py:90: in test_pull_multiple
assert len(images) == 1
E AssertionError: assert 2 == 1
E + where 2 = len([<Image: 'hello-world:linux'>, <Image: 'hello-world:latest'>])
This patch temporarily skips the broken test until it is fixed upstream.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The docker-py tests were broken, because the version of
py-test that was used, used a dependency that had a new
major release with a breaking change.
Unfortunately, it was not pinned to a specific version,
so when the dependency did the release, py-test broke;
```
22:16:47 Traceback (most recent call last):
22:16:47 File "/usr/local/bin/pytest", line 10, in <module>
22:16:47 sys.exit(main())
22:16:47 File "/usr/local/lib/python3.6/site-packages/_pytest/config/__init__.py", line 61, in main
22:16:47 config = _prepareconfig(args, plugins)
22:16:47 File "/usr/local/lib/python3.6/site-packages/_pytest/config/__init__.py", line 182, in _prepareconfig
22:16:47 config = get_config()
22:16:47 File "/usr/local/lib/python3.6/site-packages/_pytest/config/__init__.py", line 156, in get_config
22:16:47 pluginmanager.import_plugin(spec)
22:16:47 File "/usr/local/lib/python3.6/site-packages/_pytest/config/__init__.py", line 530, in import_plugin
22:16:47 __import__(importspec)
22:16:47 File "/usr/local/lib/python3.6/site-packages/_pytest/tmpdir.py", line 25, in <module>
22:16:47 class TempPathFactory(object):
22:16:47 File "/usr/local/lib/python3.6/site-packages/_pytest/tmpdir.py", line 35, in TempPathFactory
22:16:47 lambda p: Path(os.path.abspath(six.text_type(p)))
22:16:47 TypeError: attrib() got an unexpected keyword argument 'convert'
```
docker-py master has a fix for this (bumping the version of
`py-test`), but it's not in a release yet, and the docker cli that's used
in our CI is pinned to 17.06, which doesn't support building from a remote
git repository from a specific git commit.
To fix the immediate situation, this patch switches the docker-py
tests to run from the master branch.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Seen failing a couple of times:
```
[2019-09-02T08:40:15.796Z] =================================== FAILURES ===================================
[2019-09-02T08:40:15.796Z] __________________ AttachContainerTest.test_attach_no_stream ___________________
[2019-09-02T08:40:15.796Z] tests/integration/api_container_test.py:1250: in test_attach_no_stream
[2019-09-02T08:40:15.796Z] assert output == 'hello\n'.encode(encoding='ascii')
[2019-09-02T08:40:15.796Z] E AssertionError: assert b'' == b'hello\n'
[2019-09-02T08:40:15.796Z] E Right contains more items, first extra item: 104
[2019-09-02T08:40:15.796Z] E Use -v to get the full diff
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- SC2006: use $(...) notation instead of legacy backticked `...`
- SC2086: double quote to prevent globbing and word splitting
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
and remove `PullImageTest::test_build_invalid_platform` from the list,
which was a copy/paste error in f8cde0b32d
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
When building this image docker-in-docker, the DNS in the environment
may not be usable for the build-container, causing resolution to fail:
```
02:35:31 W: Failed to fetch http://deb.debian.org/debian/dists/jessie/Release.gpg Temporary failure resolving 'deb.debian.org'
```
This patch detects if we're building from within a container, and if
so, skips creating a networking namespace for the build by using
`--network=host`.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This removes all the installation steps for docker-py from the
Dockerfile, and instead builds the upstream Dockerfile, and runs
docker-py tests in a container.
To test;
```
make test-docker-py
...
Removing bundles/
---> Making bundle: dynbinary (in bundles/dynbinary)
Building: bundles/dynbinary-daemon/dockerd-dev
Created binary: bundles/dynbinary-daemon/dockerd-dev
---> Making bundle: test-docker-py (in bundles/test-docker-py)
---> Making bundle: .integration-daemon-start (in bundles/test-docker-py)
Using test binary docker
Starting dockerd
INFO: Waiting for daemon to start...
.
INFO: Building docker-sdk-python3:3.7.0...
sha256:686428ae28479e9b5c8fdad1cadc9b7a39b462e66bd13a7e35bd79c6a152a402
INFO: Starting docker-py tests...
============================= test session starts ==============================
platform linux -- Python 3.6.8, pytest-4.1.0, py-1.8.0, pluggy-0.9.0
rootdir: /src, inifile: pytest.ini
plugins: timeout-1.3.3, cov-2.6.1
collected 359 items
tests/integration/api_build_test.py .......s....
....
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These scripts explicitly use Bash, so we should be able to use
`[[` instead of `[` (which seems to be recommended).
Also added curly brackets to some bare variables, and quoted some paths.
This makes my IDE a bit more silent :-)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This is especially important for distributions like NixOS where `/bin/bash` doesn't exist, or for MacOS users who've installed a newer version of Bash than the one that comes with their OS.
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
Interactive integration testing is useful when you're developing new tests, or
making changes to cli code.
Signed-off-by: Daniel Nephin <dnephin@docker.com>
The docker-py commit used in the standard `Dockerfile` is from Feb. 2015
and is out of date with the current API level and has fixes for things
like the new docker cli config location and registry v2 changes/API
responses as well.
Also pass "NOT_ON_HOST=true" to docker-py test suite so that tests
relying on direct HOST interaction (versus running in a container) are
skipped.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
no longer load hide critical code such as in .integration-daemon-{start,stop},
if this step failed, it will had logged the corresponding module before:
---> Making bundle: .integration-daemon-start (in bundles/1.7.0-dev/daemon-start)
which is nicer to debug.
This will make it also easier to execute a single tests in an interactive shell.
$ make shell
docker> . hack/make.sh binary .integration-daemon-start .integration-daemon-setup
docker> docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
docker> go test github.com/docker/docker/integration-cli
Signed-off-by: Jörg Thalheim <joerg@higgsboson.tk>
Using "DEST" for our build artifacts inside individual bundlescripts was already well-established convention, but this officializes it by having `make.sh` itself set the variable and create the directory, also handling CYGWIN oddities in a single central place (instead of letting them spread outward from `hack/make/binary` like was definitely on their roadmap, whether they knew it or not; sneaky oddities).
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
From the Bash manual's `set -e` description:
(https://www.gnu.org/software/bash/manual/bashref.html#index-set)
> Exit immediately if a pipeline (see Pipelines), which may consist of a
> single simple command (see Simple Commands), a list (see Lists), or a
> compound command (see Compound Commands) returns a non-zero status.
> The shell does not exit if the command that fails is part of the
> command list immediately following a while or until keyword, part of
> the test in an if statement, part of any command executed in a && or
> || list except the command following the final && or ||, any command
> in a pipeline but the last, or if the command’s return status is being
> inverted with !. If a compound command other than a subshell returns a
> non-zero status because a command failed while -e was being ignored,
> the shell does not exit.
Additionally, further down:
> If a compound command or shell function executes in a context where -e
> is being ignored, none of the commands executed within the compound
> command or function body will be affected by the -e setting, even if
> -e is set and a command returns a failure status. If a compound
> command or shell function sets -e while executing in a context where
> -e is ignored, that setting will not have any effect until the
> compound command or the command containing the function call
> completes.
Thus, the only way to have our `.integration-daemon-stop` script
actually run appropriately to clean up our daemon on test/script failure
is to use `trap ... EXIT`, which we traditionally avoid because it does
not have any stacking capabilities, but in this case is a reasonable
compromise because it's going to be the only script using it (for now,
at least; we can evaluate more complex solutions in the future if they
actually become necessary).
The alternatives were much less reasonable. One is to have the entire
complex chains in any script wanting to use `.integration-daemon-start`
/ `.integration-daemon-stop` be chained together with `&&` in an `if`
block, which is untenable. The other I could think of was taking the
body of these scripts out into separate scripts, essentially meaning
we'd need two files for each of these, which further complicates the
maintenance.
Add to that the fact that our `trap ... EXIT` is scoped to the enclosing
subshell (`( ... )`) and we're in even more reasonable territory with
this pattern.
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
This also removes the now-defunct `*maintainer*.sh` scripts that don't work with the new TOML format, and moves a couple not-build-or-release-related scripts to `contrib/` instead.
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
2015-03-13 14:04:08 -06:00
Renamed from project/make/test-docker-py (Browse further)
