This test runs on a daemon also used by other tests
so make sure we don't get failures if another test
doesn't cleanup or is running in parallel.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 915acffdb4)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This adds some logs, handles timers better, and sets a request timeout
for the ping request.
I'm not sure the ticker in that loop is what we really want since the
ticker keeps ticking while we are (attempting) to make a request... but
I opted to not change that for now.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit 20ea8942b8)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Moby currently sorts uid and gid ranges in id maps. This causes subuid
and subgid files to be interpreted wrongly.
The subuid file
```
> cat /etc/subuid
jonas:100000:1000
jonas:1000:1
```
configures that the container uids 0-999 are mapped to the host uids
100000-100999 and uid 1000 in the container is mapped to uid 1000 on the
host. The expected uid_map is:
```
> docker run ubuntu cat /proc/self/uid_map
0 100000 1000
1000 1000 1
```
Moby currently sorts the ranges by the first id in the range. Therefore
with the subuid file above the uid 0 in the container is mapped to uid
100000 on host and the uids 1-1000 in container are mapped to the uids
1-1000 on the host. The resulting uid_map is:
```
> docker run ubuntu cat /proc/self/uid_map
0 1000 1
1 100000 1000
```
The ordering was implemented to work around a limitation in Linux 3.8.
This is fixed since Linux 3.9 as stated on the user namespaces manpage
[1]:
> In the initial implementation (Linux 3.8), this requirement was
> satisfied by a simplistic implementation that imposed the further
> requirement that the values in both field 1 and field 2 of successive
> lines must be in ascending numerical order, which prevented some
> otherwise valid maps from being created. Linux 3.9 and later fix this
> limitation, allowing any valid set of nonoverlapping maps.
This fix changes the interpretation of subuid and subgid files which do
not have the ids of in the numerical order for each individual user.
This breaks users that rely on the current behaviour.
The desired mapping above - map low user ids in the container to high
user ids on the host and some higher user ids in the container to lower
user on host - can unfortunately not archived with the current
behaviour.
[1] http://man7.org/linux/man-pages/man7/user_namespaces.7.html
Signed-off-by: Jonas Dohse <jonas@dohse.ch>
(cherry picked from commit c4628d79d2)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Increases the max recieved gRPC message size for Node and Secret list
operations. This has already been done for the other swarm types, but
was not done for these.
Signed-off-by: Drew Erny <drew.erny@docker.com>
(cherry picked from commit a0903e1fa3)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
(cherry picked from commit ca5aab19b4)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Previously `docker info` had reported "cgroupfs" as the cgroup driver
but the driver wasn't actually used at all.
This PR reports "none" as the cgroup driver so as to avoid confusion.
e.g. kubeadm/kubelet will detect cgroupless-ness by checking this docker
info field. https://github.com/rootless-containers/usernetes/pull/97
Note that user still cannot specify `native.cgroupdriver=none` manually.
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
(cherry picked from commit 153466ba0a)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Previously only unpack operations were supported with chroot.
This adds chroot support for packing operations.
This prevents potential breakouts when copying data from a container.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit 3029e765e2)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This is useful for preventing CVE-2018-15664 where a malicious container
process can take advantage of a race on symlink resolution/sanitization.
Before this change chrootarchive would chroot to the destination
directory which is attacker controlled. With this patch we always chroot
to the container's root which is not attacker controlled.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit d089b63937)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Reverts the change to swarmkit that made all updates set UpdateStatus to
Completed
Signed-off-by: Drew Erny <drew.erny@docker.com>
(cherry picked from commit c7d9599e3d)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
As pointed out by Tonis, there's a race between ReleaseRWLayer()
and GetRWLayer():
```
----- goroutine 1 ----- ----- goroutine 2 -----
ReleaseRWLayer()
m := ls.mounts[l.Name()]
...
m.deleteReference(l)
m.hasReferences()
... GetRWLayer()
... mount := ls.mounts[id]
ls.driver.Remove(m.mountID)
ls.store.RemoveMount(m.name) return mount.getReference()
delete(ls.mounts, m.Name())
----------------------- -----------------------
```
When something like this happens, GetRWLayer will return
an RWLayer without a storage. Oops.
There might be more races like this, and it seems the best
solution is to lock by layer id/name by using pkg/locker.
With this in place, name collision could not happen, so remove
the part of previous commit that protected against it in
CreateRWLayer (temporary nil assigmment and associated rollback).
So, now we have
* layerStore.mountL sync.Mutex to protect layerStore.mount map[]
(against concurrent access);
* mountedLayer's embedded `sync.Mutex` to protect its references map[];
* layerStore.layerL (which I haven't touched);
* per-id locker, to avoid name conflicts and concurrent operations
on the same rw layer.
The whole rig seems to look more readable now (mutexes use is
straightforward, no nested locks).
Reported-by: Tonis Tiigi <tonistiigi@gmail.com>
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit af433dd200)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This is an additon to commit 1fea38856a ("Remove v1.10 migrator")
aka PR #38265. Since that one, CreateRWLayerByGraphID() is not
used anywhere, so let's drop it.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit b4e9b50765)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Goroutine stack analisys shown some lock contention
while doing massively (100 instances of `docker rm`)
parallel image removal, with many goroutines waiting
for the mountL mutex. Optimize it.
With this commit, the above operation is about 3x
faster, with no noticeable change to container
creation times (tested on aufs and overlay2).
kolyshkin@:
- squashed commits
- added description
- protected CreateRWLayer against name collisions by
temporary assiging nil to ls.mounts[name], and treating
nil as "non-existent" in all the other functions.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit 05250a4f00)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Add a mutex to protect concurrent access to mountedLayer.references map.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
(cherry picked from commit f73b5cb4e8)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Currently the API spec would allow `"443/tcp": [null]`, but what should
be allowed is `"443/tcp": null`
Signed-off-by: Dominic Tubach <dominic.tubach@to.com>
(cherry picked from commit 32b5d296ea)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Make sure adapter.removeNetworks executes during task Remove
adapter.removeNetworks was being skipped for cases when
isUnknownContainer(err) was true after adapter.remove was executed
This fix eliminates the nil return case forcing the function
to continue executing unless there is a true error
Fixes https://github.com/moby/moby/issues/39225
Signed-off-by: Arko Dasgupta <arko.dasgupta@docker.com>
(cherry picked from commit 70fa7b6a3f)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
