This implements a simple bootloader that is capable of loading ELF64
kernel images. It does this by using QEMU/GRUB to load the kernel image
from disk and pass it to our bootloader as a Multiboot module.
The bootloader then parses the ELF image and sets it up appropriately.
The kernel's entry point is a C++ function with architecture-native
code.
Co-authored-by: Liav A <liavalb@gmail.com>
This adds a new section .ksyms at the end of the linker map, reserves
5MiB for it (which are after end_of_kernel_image so they get re-used
once MemoryManager is initialized) and then embeds the symbol map into
the kernel binary with objcopy. This also shrinks the .ksyms section to
the real size of the symbol file (around 900KiB at the moment).
By doing this we can make the symbol map available much earlier in the
boot process, i.e. even before VFS is available.
The current implementation would only check the first name.length()
characters match, which means any kernel symbol that the provided name
is a prefix of would match, instead of the actual matching symbol.
This commit fixes that by using StringView::operator==() for the
comparison, which already checks the equality correctly.
SPDX License Identifiers are a more compact / standardized
way of representing file license information.
See: https://spdx.dev/resources/use/#identifiers
This was done with the `ambr` search and replace tool.
ambr --no-parent-ignore --key-from-file --rep-from-file key.txt rep.txt *
Make more of the kernel compile in 64-bit mode, and make some things
pointer-size-agnostic (by using FlatPtr.)
There's a lot of work to do here before the kernel will even compile.
(...and ASSERT_NOT_REACHED => VERIFY_NOT_REACHED)
Since all of these checks are done in release builds as well,
let's rename them to VERIFY to prevent confusion, as everyone is
used to assertions being compiled out in release.
We can introduce a new ASSERT macro that is specifically for debug
checks, but I'm doing this wholesale conversion first since we've
accumulated thousands of these already, and it's not immediately
obvious which ones are suitable for ASSERT.
Now that the CrashDaemon symbolicates crashes in userspace, let's take
this one step further and stop trying to symbolicate userspace programs
in the kernel at all.
When a process crashes, we generate a coredump file and write it in
/tmp/coredumps/.
The coredump file is an ELF file of type ET_CORE.
It contains a segment for every userspace memory region of the process,
and an additional PT_NOTE segment that contains the registers state for
each thread, and a additional data about memory regions
(e.g their name).
Since the CPU already does almost all necessary validation steps
for us, we don't really need to attempt to do this. Doing it
ourselves doesn't really work very reliably, because we'd have to
account for other processors modifying virtual memory, and we'd
have to account for e.g. pages not being able to be allocated
due to insufficient resources.
So change the copy_to/from_user (and associated helper functions)
to use the new safe_memcpy, which will return whether it succeeded
or not. The only manual validation step needed (which the CPU
can't perform for us) is making sure the pointers provided by user
mode aren't pointing to kernel mappings.
To make it easier to read/write from/to either kernel or user mode
data add the UserOrKernelBuffer helper class, which will internally
either use copy_from/to_user or directly memcpy, or pass the data
through directly using a temporary buffer on the stack.
Last but not least we need to keep syscall params trivial as we
need to copy them from/to user mode using copy_from/to_user.
This enables a nice warning in case a function becomes dead code. Also, in case
of signal_trampoline_dummy, marking it external (non-static) prevents it from
being 'optimized away', which would lead to surprising and weird linker errors.
I found these places by using -Wmissing-declarations.
The Kernel still shows these issues, which I think are false-positives,
but don't want to touch:
- Kernel/Arch/i386/CPU.cpp:1081:17: void Kernel::enter_thread_context(Kernel::Thread*, Kernel::Thread*)
- Kernel/Arch/i386/CPU.cpp:1170:17: void Kernel::context_first_init(Kernel::Thread*, Kernel::Thread*, Kernel::TrapFrame*)
- Kernel/Arch/i386/CPU.cpp:1304:16: u32 Kernel::do_init_context(Kernel::Thread*, u32)
- Kernel/Arch/i386/CPU.cpp:1347:17: void Kernel::pre_init_finished()
- Kernel/Arch/i386/CPU.cpp:1360:17: void Kernel::post_init_finished()
No idea, not gonna touch it.
- Kernel/init.cpp:104:30: void Kernel::init()
- Kernel/init.cpp:167:30: void Kernel::init_ap(u32, Kernel::Processor*)
- Kernel/init.cpp:184:17: void Kernel::init_finished(u32)
Called by boot.S.
- Kernel/init.cpp:383:16: int Kernel::__cxa_atexit(void (*)(void*), void*, void*)
- Kernel/StdLib.cpp:285:19: void __cxa_pure_virtual()
- Kernel/StdLib.cpp:300:19: void __stack_chk_fail()
- Kernel/StdLib.cpp:305:19: void __stack_chk_fail_local()
Not sure how to tell the compiler that the compiler is already using them.
Also, maybe __cxa_atexit should go into StdLib.cpp?
- Kernel/Modules/TestModule.cpp:31:17: void module_init()
- Kernel/Modules/TestModule.cpp:40:17: void module_fini()
Could maybe go into a new header. This would also provide type-checking for new modules.
We can now properly initialize all processors without
crashing by sending SMP IPI messages to synchronize memory
between processors.
We now initialize the APs once we have the scheduler running.
This is so that we can process IPI messages from the other
cores.
Also rework interrupt handling a bit so that it's more of a
1:1 mapping. We need to allocate non-sharable interrupts for
IPIs.
This also fixes the occasional hang/crash because all
CPUs now synchronize memory with each other.
Allow file system implementation to return meaningful error codes to
callers of the FileDescription::read_entire_file(). This allows both
Process::sys$readlink() and Process::sys$module_load() to return more
detailed errors to the user.
Also, duplicate data in dbg() and klog() calls were removed.
In addition, leakage of virtual address to kernel log is prevented.
This is done by replacing kprintf() calls to dbg() calls with the
leaked data instead.
Also, other kprintf() calls were replaced with klog().
Previously we would map the entire executable of a program in its own
address space (but make it unavailable to userspace code.)
This patch removes that and changes the symbolication code to remap
the executable on demand (and into the kernel's own address space
instead of the process address space.)
This opens up a couple of further simplifications that will follow.
uintptr_t is 32-bit or 64-bit depending on the target platform.
This will help us write pointer size agnostic code so that when the day
comes that we want to do a 64-bit port, we'll be in better shape.
Right now, permission flags passed to VFS::open() are effectively ignored, but
that is going to change.
* O_RDONLY is 0, but it's still nicer to pass it explicitly
* POSIX says that binding a Unix socket to a symlink shall fail with EADDRINUSE
As suggested by Joshua, this commit adds the 2-clause BSD license as a
comment block to the top of every source file.
For the first pass, I've just added myself for simplicity. I encourage
everyone to add themselves as copyright holders of any file they've
added or modified in some significant way. If I've added myself in
error somewhere, feel free to replace it with the appropriate copyright
holder instead.
Going forward, all new source files should include a license header.
It was possible to craft a custom ELF executable that when symbolicated
would cause the kernel to read from user-controlled addresses anywhere
in memory. You could then fetch this memory via /proc/PID/stack
We fix this by making ELFImage hand out StringView rather than raw
const char* for symbol names. In case a symbol offset is outside the
ELF image, you get a null StringView. :^)
Test: Kernel/elf-symbolication-kernel-read-exploit.cpp
Supervisor Mode Access Prevention (SMAP) is an x86 CPU feature that
prevents the kernel from accessing userspace memory. With SMAP enabled,
trying to read/write a userspace memory address while in the kernel
will now generate a page fault.
Since it's sometimes necessary to read/write userspace memory, there
are two new instructions that quickly switch the protection on/off:
STAC (disables protection) and CLAC (enables protection.)
These are exposed in kernel code via the stac() and clac() helpers.
There's also a SmapDisabler RAII object that can be used to ensure
that you don't forget to re-enable protection before returning to
userspace code.
THis patch also adds copy_to_user(), copy_from_user() and memset_user()
which are the "correct" way of doing things. These functions allow us
to briefly disable protection for a specific purpose, and then turn it
back on immediately after it's done. Going forward all kernel code
should be moved to using these and all uses of SmapDisabler are to be
considered FIXME's.
Note that we're not realizing the full potential of this feature since
I've used SmapDisabler quite liberally in this initial bring-up patch.
Let's lock down access to the kernel symbol table, since it trivializes
learning where the kernel functions are.
Of course, you can just build the same revision yourself locally and
learn the information, but we're taking one step at a time here. :^)
This was too noisy and important-sounding, when it doesn't really
matter that much. It's not the end of the world if symbolication fails
for one reason or another.
