beenull/raspap-webgui-mirror
1
0
Fork 0
mirror of https://github.com/RaspAP/raspap-webgui.git synced 2024-11-21 23:20:22 +00:00
Code Issues Projects Releases Packages Wiki Activity

Update screenshot

Browse source
This commit is contained in:
Bill Zimmerman 2020-03-16 10:46:07 +01:00 committed by GitHub
parent 42ddc46a21
commit b33753bc73
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
1 changed files with 2 additions and 2 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

4
README.md
View file

@ -64,6 +64,8 @@ configured as an access point as follows:
## Bridged AP
By default RaspAP configures a routed AP for your clients to connect to. A bridged AP configuration is also possible. Slide the **Bridged AP mode** toggle under the **Advanced** tab of **Configure hotspot**, then save and restart the hotspot.
![](https://i.imgur.com/J5VKSay.png)
**Note:** In bridged mode, all routing capabilities are handled by your upstream router. Because your router assigns IP addresses to your RPi's hotspot and its clients, you might not be able to reach the RaspAP web interface from the default `10.3.141.1` address. Instead use your RPi's hostname followed by `.local` to access the RaspAP web interface. With Raspbian default settings, this should look like `raspberrypi.local`.
More information on Bridged AP mode is provided [on our wiki](https://github.com/billz/raspap-webgui/wiki/Bridged-AP-mode).
@ -71,8 +73,6 @@ More information on Bridged AP mode is provided [on our wiki](https://github.com
## Simultaneous AP and Wifi client
RaspAP lets you easily create an AP with a Wifi client configuration. With your RPi configured in managed mode, enable the AP from the **Advanced** tab of **Configure hotspot** by sliding the **Wifi client AP mode** toggle. Save settings and start the hotspot. The managed mode AP is functional without restart.
![](https://i.imgur.com/y7XOYPB.png)
**Note:** This option is disabled until you configure your RPi as a wireless client. For a Raspberry Pi operating in [managed mode](https://github.com/billz/raspap-webgui/wiki/FAQs#how-do-i-prepare-the-sd-card-to-connect-to-wifi-in-headless-mode) without an `eth0` connection, this configuration must be enabled _before_ a reboot.
## Support us