--------------------------
Setup:
* When upgrading from versions before v0.40, setup will now warn that ownCloud/Nextcloud data cannot be migrated rather than failing the installation.
Mail:
* An MTA-STS policy for incoming mail is now published (in DNS and over HTTPS) when the primary hostname and email address domain both have a signed TLS certificate installed, allowing senders to know that an encrypted connection should be enforced.
* The per-IP connection limit to the IMAP server has been doubled to allow more devices to connect at once, especially with multiple users behind a NAT.
DNS:
* autoconfig and autodiscover subdomains and CalDAV/CardDAV SRV records are no longer generated for domains that don't have user accounts since they are unnecessary.
* IPv6 addresses can now be specified for secondary DNS nameservers in the control panel.
TLS:
* TLS certificates are now provisioned in groups by parent domain to limit easy domain enumeration and make provisioning more resilient to errors for particular domains.
Control Panel:
* The control panel API is now fully documented at https://mailinabox.email/api-docs.html.
* User passwords can now have spaces.
* Status checks for automatic subdomains have been moved into the section for the parent domain.
* Typo fixed.
Web:
* The default web page served on fresh installations now adds the `noindex` meta tag.
* The HSTS header is revised to also be sent on non-success responses.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAtFiEEX0wOcxPM10RpOyrquSBB9MEL3YEFAl9t2AgPHGp0QG9jY2Ft
cy5pbmZvAAoJELkgQfTBC92BZNkH/1jIGoWTz0xlS+e+TeXpHoCp/7zYAvQq/a/y
vj9t1N1+bBg6Ywbd8UxyvOHwuL/UQU/5LTq6hk3gD+2ARfJUvDRbb047Xzlisg3N
LhNoVhVbsxqKP1X2ZjeIBq9DgzMavuB64Bwd5UNdceM0Addi8KuCDOMF+FNY2t8k
xytGjYdBi1/BG6SLBX+FAm5yrJghmkUJs2FnJjebSyyeV2HP3L1iBrk2N8UBd6PU
fVjde534lgygFZK/8yXJpY2olfLMYJv7CaOMxvaW6RpbMI8VeLwDLfRt5LcrQZqq
YXkuEnUI0eygbQYkeK/Vr1Vey6uQAWzIfbImEglHfvOXsZSYFXs=
=SJNM
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=VgsY
-----END PGP SIGNATURE-----
Merge v0.50 from upstream
v0.50 (September 25, 2020)
--------------------------
Setup:
* When upgrading from versions before v0.40, setup will now warn that ownCloud/Nextcloud data cannot be migrated rather than failing the installation.
Mail:
* An MTA-STS policy for incoming mail is now published (in DNS and over HTTPS) when the primary hostname and email address domain both have a signed TLS certificate installed, allowing senders to know that an encrypted connection should be enforced.
* The per-IP connection limit to the IMAP server has been doubled to allow more devices to connect at once, especially with multiple users behind a NAT.
DNS:
* autoconfig and autodiscover subdomains and CalDAV/CardDAV SRV records are no longer generated for domains that don't have user accounts since they are unnecessary.
* IPv6 addresses can now be specified for secondary DNS nameservers in the control panel.
TLS:
* TLS certificates are now provisioned in groups by parent domain to limit easy domain enumeration and make provisioning more resilient to errors for particular domains.
Control Panel:
* The control panel API is now fully documented at https://mailinabox.email/api-docs.html.
* User passwords can now have spaces.
* Status checks for automatic subdomains have been moved into the section for the parent domain.
* Typo fixed.
Web:
* The default web page served on fresh installations now adds the `noindex` meta tag.
* The HSTS header is revised to also be sent on non-success responses.
* this allows implementation of other mfa schemes in the future (webauthn)
* also makes key management easier and enforces one totp credentials per user on db-level
Security fixes:
* Fix missing brute force login protection for Roundcube logins.
Software updates:
* Upgraded Roundcube from 1.4.2 to 1.4.4.
* Upgraded Nextcloud from 17.0.2 to 17.0.6 (with Contacts from 3.1.6 to 3.3.0 and Calendar from 1.7.1 to v2.0.3)
* Upgraded Z-Push to 2.5.2.
System:
* Nightly backups now occur on a random minute in the 3am hour (in the system time zone). The minute is chosen during Mail-in-a-Box installation/upgrade and remains the same until the next upgrade.
* Fix for mail log statistics report on leap days.
* Fix Mozilla autoconfig useGlobalPreferredServer setting.
Web:
* Add a new hidden feature to set nginx alias in www/custom.yaml.
Setup:
* Improved error handling.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAtFiEEX0wOcxPM10RpOyrquSBB9MEL3YEFAl7AbCoPHGp0QG9jY2Ft
cy5pbmZvAAoJELkgQfTBC92BjbEIAIwmIpgNCT+age/SsUhDY8pjnFQWXBCl1nwa
RFN40Ev73DoBXUP+za4RE0eyCLIw5/laCwCjaESobiBTuc6boC1QU4abFUV5NfJQ
P3AnQ2qXkrtcmIQX42ge4AGsL3vMVRtjZWb+bvut2SmLB8BI5w/9XsQAS59lqSz0
kK6ShlDmFaToMgTQqwl0CW8a0vdjRca5Mq011xUZrvqTAm7ACQIvS6np4UYBGSNy
bU8O1xWMJb0HlO7f+bWCDYr1I+nRS1xXMW9pKsE08YFwcRLa+C42QkDXDuS/o/zj
EXBLGwYcB0DEu4wLLbih8xdbED2ZiMO2t6IHtbXPcoLtHo3Tv6I=
=RUkr
-----END PGP SIGNATURE-----
Merge tag 'v0.45' of https://github.com/mail-in-a-box/mailinabox
v0.45 (May 16, 2020)
Security fixes:
* Fix missing brute force login protection for Roundcube logins.
Software updates:
* Upgraded Roundcube from 1.4.2 to 1.4.4.
* Upgraded Nextcloud from 17.0.2 to 17.0.6 (with Contacts from 3.1.6 to 3.3.0 and Calendar from 1.7.1 to v2.0.3)
* Upgraded Z-Push to 2.5.2.
System:
* Nightly backups now occur on a random minute in the 3am hour (in the system time zone). The minute is chosen during Mail-in-a-Box installation/upgrade and remains the same until the next upgrade.
* Fix for mail log statistics report on leap days.
* Fix Mozilla autoconfig useGlobalPreferredServer setting.
Web:
* Add a new hidden feature to set nginx alias in www/custom.yaml.
Setup:
* Improved error handling.
- The MIAB version check regularly fails at 03:00, presumably because a
large portion of installations is checking mailinabox.email at the same
time.
- At installation time, the time of the nightly clock is configured to
run at a random minute after 03:00, but before 04:00.
- Users might expect the nightly tasks to be over at a certain time and
run their own custom tasks afterwards. This could thus interfere with
custom backup routines.
- This breaks reproducibility of the installation process.
- Users might also be surprised by the nightly task time changing after
updating MIAB.
The function apt_add_repository_to_unattended_upgrades is defined
but never called anywhere. It appears that automatic apt updates
are handled in system.sh where the file /etc/apt/apt.conf.d/02periodic
is created. The last call was removed in bbfa01f33a.
Co-authored-by: ddavis32 <dan@nthdegreesoftware.com>
Because Mailman reformats headers it breaks DKIM signatures. SPF also does
not apply in mailing lists. This together causes DMARC to fail and mark the
email as invalid. This fixes DKIM signatures for Mailman-based mailing lists
and makes sure DMARC test is passed.
A minimal Ubuntu server installation might not have universe enabled by
default. By adding it, we ensure we can install packages only available
in universe, such as python3-pip
Merges #1650.
-------------------------
Security fixes:
* A security issue was discovered in rsync backups. If you have enabled rsync backups, the file `id_rsa_miab` may have been copied to your backup destination. This file can be used to access your backup destination. If the file was copied to your backup destination, we recommend that you delete the file on your backup destination, delete `/root/.ssh/id_rsa_miab` on your Mail-in-a-Box, then re-run Mail-in-a-Box setup, and re-configure your SSH public key at your backup destination according to the instructions in the Mail-in-a-Box control panel.
* Brute force attack prevention was missing for the managesieve service.
Setup:
* Nextcloud was not upgraded properly after restoring Mail-in-a-Box from a backup from v0.40 or earlier.
Mail:
* Upgraded Roundcube to 1.3.10.
* Fetch an updated whitelist for greylisting on a monthly basis to reduce the number of delayed incoming emails.
Control panel:
* When using secondary DNS, it is now possible to specify a subnet range with the `xfr:` option.
* Fixed an issue when the secondary DNS option is used and the secondary DNS hostname resolves to multiple IP addresses.
* Fix a bug in how a backup configuration error is shown.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAtFiEEX0wOcxPM10RpOyrquSBB9MEL3YEFAl1rrwIPHGp0QG9jY2Ft
cy5pbmZvAAoJELkgQfTBC92BgckIALFnDFxhQ18MtClpi79+rnl1aA5DqbToCuI2
MHIAOmxIVSavnd5MZZ3efXWAzIniEpbq0X+6Rlzas5lkreT1mHoJsKdkt0bOqy1a
ZF2vT5UnUM9cwPHkU1ak/TaD9v97wbHpWWGwAK+/zTL6w1ReCVfQ2QzCzoDaY7xh
OZFXE+YsaI7qZeG3Q4jfFr0IYDowLgjgBpdWvO71QKzWjIIvBNX1ZGt2r+cuKmQ5
JOXIAR4fdri0p8dMd2sqq0FatBBCfjHDBykA/+GzJJDBX7MNoZsQT3bowrhj8XPS
f5cKUKm7zlDsm02bfCtDD6nvYYUxvOdQx7yfdL8RYSdy71Chs20=
=7M/i
-----END PGP SIGNATURE-----
Merge tag 'v0.43' of https://github.com/mail-in-a-box/mailinabox
v0.43 (September 1, 2019)
-------------------------
Security fixes:
* A security issue was discovered in rsync backups. If you have enabled
rsync backups, the file `id_rsa_miab` may have been copied to your
backup destination. This file can be used to access your backup
destination. If the file was copied to your backup destination, we
recommend that you delete the file on your backup destination, delete
`/root/.ssh/id_rsa_miab` on your Mail-in-a-Box, then re-run
Mail-in-a-Box setup, and re-configure your SSH public key at your backup
destination according to the instructions in the Mail-in-a-Box control
panel.
* Brute force attack prevention was missing for the managesieve service.
Setup:
* Nextcloud was not upgraded properly after restoring Mail-in-a-Box from
a backup from v0.40 or earlier.
Mail:
* Upgraded Roundcube to 1.3.10.
* Fetch an updated whitelist for greylisting on a monthly basis to
reduce the number of delayed incoming emails.
Control panel:
* When using secondary DNS, it is now possible to specify a subnet range
with the `xfr:` option.
* Fixed an issue when the secondary DNS option is used and the secondary
DNS hostname resolves to multiple IP addresses.
* Fix a bug in how a backup configuration error is shown.
5F4C0E7313CCD744693B2AEAB92041F4C10BDD81
* Download and verify Nextcloud download before deleting old install directory
* Changed install logic to look at config.php and not version.php for database version number. When restoring from a backup, config.php in STORAGE_ROOT will hold the Nextcloud version that corresponds to the user's database and version.php in /usr/local won't even exist, so we were missing Nextcloud migration steps. In other cases they should be the same.
* Update to Nextcloud 15.0.7, Contacts to 3.1.1, and Calendar to 1.6.5
* Enabled localhost-only insecure IMAP login for localhost Nextcloud auth
* Add package php-imagick and BigInt conversion
* added support for /cloud/oc[sm]-provider/ endpoint
* Upgraded Nextcloud from 13.0.6 to 14.0.6.
* Upgraded Contacts from 2.1.5 to 2.1.8.
* Upgraded Calendar from 1.6.1 to 1.6.4.
* Cleanup unsupported version upgrades: Since an upgrade to v0.30 is mandatory before moving upward, I removed the checks for Nextcloud prior version 12.
* Fix the storage root path.
* Add missing indices. Thx @yodax for your feedback.
* drop the ondrej/php PPA since PHP 7.x is available directly from Ubuntu 18.04
* intall PHP 7.2 which is just the "php" package in Ubuntu 18.04
* some package names changed, some unnecessary packages are no longer provided
* update paths
@joshdata squashed pull request #1398, removed some comments, and added these notes:
* The old init.d script for the management daemon is replaced with a systemd service.
* A systemd service configuration is added to configure permissions for munin on startup.
* nginx SSL settings are updated because nginx's options and defaults have changed, and we now enable http2.
* Automatic SSHFP record generation is updated to know that 22 is the default SSH daemon port, since it is no longer explicit in sshd_config.
* The dovecot-lucene package is dropped because the Mail-in-a-Box PPA where we built the package has not been updated for Ubuntu 18.04.
* The stock postgrey package is installed instead of the one from our PPA (which we no longer support), which loses the automatic whitelisting of DNSWL.org-whitelisted senders.
* Drop memcached and the status check for memcached, which we used to use with ownCloud long ago but are no longer installing.
* Other minor changes.
fixes#1409
This reverts commit 82844ca651 ("make certbot auto-agree to TOS if NONINTERACTIVE=1 env var is set (#1399)") and instead *always* auto-agree. If we don't auto-agree, certbot asks the user interactively, but our "curl | bash" setup line does not permit interactive prompts, so certbot failed to register and all certificate things were broken until the command was re-run interactively.
Starting with 2.4, Z-Push no longer provides tarballs on their download server. The only options are getting the code from their git repository or using one of their distribution packages. Their Ubuntu 18.04 packaes don't seem to actually work in Ubuntu 18.04, so thinking ahead that's currently a bad choice. In 78d1c9be6e we switched from doing a git clone to using wget on their downloads server because of a problem with something related to stash.z-hub.io's SSL certificate. But wget also seems to work on their source code repository, so we can use that.
git clone (which uses curl) underneath was failing. Curiously, the same
git clone command would work on my macos host machine.
From the screenshot it looks like curl was somehow not able to negotiate
the connection. Might have been a missing CA certificate for Comodo, but
I was not able to determine if that was the issue.
fixes#1393closes#1387closes#1400
Our wget_verify function uses wget to download a file and then check
the file's hash. If wget fails, i.e. because of a 404 or other HTTP
or network error, we exited setup without displaying any output because
normally there are no errors and -q keeps the setup output clean.
Wrapping wget with our hide_output function, and dropping -q, captures
wget's output and shows it and exits setup just if wget fails.
see #1297
In 0088fb4553 I changed the management daemon's startup
script from a symlink to a Python script to a bash script that activated the new virtualenv
and then launched Python. As a result, the init.d script that starts the daemon would
write the pid of bash to the pidfile, and when trying to kill it, it would kill bash but
not the Python process.
Using exec to start Python fixes this problem by making the Python process have the pid
that the init.d script knows about.
fixes#1339
The cryptography package has created all sorts of installation trouble over the last few years, probably because of mismatches between OS-installed packages and pip-installed packages. Using a virtualenv for all Python packages used by the management daemon should make sure everything is consistent.
See #1298, see #1264.
The PHP5 packages have a dependency on (apache2 or php5-cgi or php5-fpm), and since removing php5-fpm apache2 started getting installed during setup, which caused a conflict with nginx of course.
These packages don't seem to be needed by Roundcube or Nextcloud --- Roundcube includes the ones it needs.
see #1264, #1298
