--------------------------
Setup:
* When upgrading from versions before v0.40, setup will now warn that ownCloud/Nextcloud data cannot be migrated rather than failing the installation.
Mail:
* An MTA-STS policy for incoming mail is now published (in DNS and over HTTPS) when the primary hostname and email address domain both have a signed TLS certificate installed, allowing senders to know that an encrypted connection should be enforced.
* The per-IP connection limit to the IMAP server has been doubled to allow more devices to connect at once, especially with multiple users behind a NAT.
DNS:
* autoconfig and autodiscover subdomains and CalDAV/CardDAV SRV records are no longer generated for domains that don't have user accounts since they are unnecessary.
* IPv6 addresses can now be specified for secondary DNS nameservers in the control panel.
TLS:
* TLS certificates are now provisioned in groups by parent domain to limit easy domain enumeration and make provisioning more resilient to errors for particular domains.
Control Panel:
* The control panel API is now fully documented at https://mailinabox.email/api-docs.html.
* User passwords can now have spaces.
* Status checks for automatic subdomains have been moved into the section for the parent domain.
* Typo fixed.
Web:
* The default web page served on fresh installations now adds the `noindex` meta tag.
* The HSTS header is revised to also be sent on non-success responses.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAtFiEEX0wOcxPM10RpOyrquSBB9MEL3YEFAl9t2AgPHGp0QG9jY2Ft
cy5pbmZvAAoJELkgQfTBC92BZNkH/1jIGoWTz0xlS+e+TeXpHoCp/7zYAvQq/a/y
vj9t1N1+bBg6Ywbd8UxyvOHwuL/UQU/5LTq6hk3gD+2ARfJUvDRbb047Xzlisg3N
LhNoVhVbsxqKP1X2ZjeIBq9DgzMavuB64Bwd5UNdceM0Addi8KuCDOMF+FNY2t8k
xytGjYdBi1/BG6SLBX+FAm5yrJghmkUJs2FnJjebSyyeV2HP3L1iBrk2N8UBd6PU
fVjde534lgygFZK/8yXJpY2olfLMYJv7CaOMxvaW6RpbMI8VeLwDLfRt5LcrQZqq
YXkuEnUI0eygbQYkeK/Vr1Vey6uQAWzIfbImEglHfvOXsZSYFXs=
=SJNM
-----END PGP SIGNATURE-----
Merge tag 'v0.50' of https://github.com/mail-in-a-box/mailinabox into master
v0.50 (September 25, 2020)
--------------------------
Setup:
* When upgrading from versions before v0.40, setup will now warn that ownCloud/Nextcloud data cannot be migrated rather than failing the installation.
Mail:
* An MTA-STS policy for incoming mail is now published (in DNS and over HTTPS) when the primary hostname and email address domain both have a signed TLS certificate installed, allowing senders to know that an encrypted connection should be enforced.
* The per-IP connection limit to the IMAP server has been doubled to allow more devices to connect at once, especially with multiple users behind a NAT.
DNS:
* autoconfig and autodiscover subdomains and CalDAV/CardDAV SRV records are no longer generated for domains that don't have user accounts since they are unnecessary.
* IPv6 addresses can now be specified for secondary DNS nameservers in the control panel.
TLS:
* TLS certificates are now provisioned in groups by parent domain to limit easy domain enumeration and make provisioning more resilient to errors for particular domains.
Control Panel:
* The control panel API is now fully documented at https://mailinabox.email/api-docs.html.
* User passwords can now have spaces.
* Status checks for automatic subdomains have been moved into the section for the parent domain.
* Typo fixed.
Web:
* The default web page served on fresh installations now adds the `noindex` meta tag.
* The HSTS header is revised to also be sent on non-success responses.
# gpg verification failed.
# Conflicts:
# .gitignore
# setup/bootstrap.sh
--------------------------
Setup:
* When upgrading from versions before v0.40, setup will now warn that ownCloud/Nextcloud data cannot be migrated rather than failing the installation.
Mail:
* An MTA-STS policy for incoming mail is now published (in DNS and over HTTPS) when the primary hostname and email address domain both have a signed TLS certificate installed, allowing senders to know that an encrypted connection should be enforced.
* The per-IP connection limit to the IMAP server has been doubled to allow more devices to connect at once, especially with multiple users behind a NAT.
DNS:
* autoconfig and autodiscover subdomains and CalDAV/CardDAV SRV records are no longer generated for domains that don't have user accounts since they are unnecessary.
* IPv6 addresses can now be specified for secondary DNS nameservers in the control panel.
TLS:
* TLS certificates are now provisioned in groups by parent domain to limit easy domain enumeration and make provisioning more resilient to errors for particular domains.
Control Panel:
* The control panel API is now fully documented at https://mailinabox.email/api-docs.html.
* User passwords can now have spaces.
* Status checks for automatic subdomains have been moved into the section for the parent domain.
* Typo fixed.
Web:
* The default web page served on fresh installations now adds the `noindex` meta tag.
* The HSTS header is revised to also be sent on non-success responses.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAtFiEEX0wOcxPM10RpOyrquSBB9MEL3YEFAl9t2AgPHGp0QG9jY2Ft
cy5pbmZvAAoJELkgQfTBC92BZNkH/1jIGoWTz0xlS+e+TeXpHoCp/7zYAvQq/a/y
vj9t1N1+bBg6Ywbd8UxyvOHwuL/UQU/5LTq6hk3gD+2ARfJUvDRbb047Xzlisg3N
LhNoVhVbsxqKP1X2ZjeIBq9DgzMavuB64Bwd5UNdceM0Addi8KuCDOMF+FNY2t8k
xytGjYdBi1/BG6SLBX+FAm5yrJghmkUJs2FnJjebSyyeV2HP3L1iBrk2N8UBd6PU
fVjde534lgygFZK/8yXJpY2olfLMYJv7CaOMxvaW6RpbMI8VeLwDLfRt5LcrQZqq
YXkuEnUI0eygbQYkeK/Vr1Vey6uQAWzIfbImEglHfvOXsZSYFXs=
=SJNM
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=VgsY
-----END PGP SIGNATURE-----
Merge v0.50 from upstream
-------------------------
Security fixes:
* A security issue was discovered in rsync backups. If you have enabled rsync backups, the file `id_rsa_miab` may have been copied to your backup destination. This file can be used to access your backup destination. If the file was copied to your backup destination, we recommend that you delete the file on your backup destination, delete `/root/.ssh/id_rsa_miab` on your Mail-in-a-Box, then re-run Mail-in-a-Box setup, and re-configure your SSH public key at your backup destination according to the instructions in the Mail-in-a-Box control panel.
* Brute force attack prevention was missing for the managesieve service.
Setup:
* Nextcloud was not upgraded properly after restoring Mail-in-a-Box from a backup from v0.40 or earlier.
Mail:
* Upgraded Roundcube to 1.3.10.
* Fetch an updated whitelist for greylisting on a monthly basis to reduce the number of delayed incoming emails.
Control panel:
* When using secondary DNS, it is now possible to specify a subnet range with the `xfr:` option.
* Fixed an issue when the secondary DNS option is used and the secondary DNS hostname resolves to multiple IP addresses.
* Fix a bug in how a backup configuration error is shown.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAtFiEEX0wOcxPM10RpOyrquSBB9MEL3YEFAl1rrwIPHGp0QG9jY2Ft
cy5pbmZvAAoJELkgQfTBC92BgckIALFnDFxhQ18MtClpi79+rnl1aA5DqbToCuI2
MHIAOmxIVSavnd5MZZ3efXWAzIniEpbq0X+6Rlzas5lkreT1mHoJsKdkt0bOqy1a
ZF2vT5UnUM9cwPHkU1ak/TaD9v97wbHpWWGwAK+/zTL6w1ReCVfQ2QzCzoDaY7xh
OZFXE+YsaI7qZeG3Q4jfFr0IYDowLgjgBpdWvO71QKzWjIIvBNX1ZGt2r+cuKmQ5
JOXIAR4fdri0p8dMd2sqq0FatBBCfjHDBykA/+GzJJDBX7MNoZsQT3bowrhj8XPS
f5cKUKm7zlDsm02bfCtDD6nvYYUxvOdQx7yfdL8RYSdy71Chs20=
=7M/i
-----END PGP SIGNATURE-----
Merge tag 'v0.43' of https://github.com/mail-in-a-box/mailinabox
v0.43 (September 1, 2019)
-------------------------
Security fixes:
* A security issue was discovered in rsync backups. If you have enabled
rsync backups, the file `id_rsa_miab` may have been copied to your
backup destination. This file can be used to access your backup
destination. If the file was copied to your backup destination, we
recommend that you delete the file on your backup destination, delete
`/root/.ssh/id_rsa_miab` on your Mail-in-a-Box, then re-run
Mail-in-a-Box setup, and re-configure your SSH public key at your backup
destination according to the instructions in the Mail-in-a-Box control
panel.
* Brute force attack prevention was missing for the managesieve service.
Setup:
* Nextcloud was not upgraded properly after restoring Mail-in-a-Box from
a backup from v0.40 or earlier.
Mail:
* Upgraded Roundcube to 1.3.10.
* Fetch an updated whitelist for greylisting on a monthly basis to
reduce the number of delayed incoming emails.
Control panel:
* When using secondary DNS, it is now possible to specify a subnet range
with the `xfr:` option.
* Fixed an issue when the secondary DNS option is used and the secondary
DNS hostname resolves to multiple IP addresses.
* Fix a bug in how a backup configuration error is shown.
5F4C0E7313CCD744693B2AEAB92041F4C10BDD81
* Update to Nextcloud 15.0.7, Contacts to 3.1.1, and Calendar to 1.6.5
* Enabled localhost-only insecure IMAP login for localhost Nextcloud auth
* Add package php-imagick and BigInt conversion
* added support for /cloud/oc[sm]-provider/ endpoint
@joshdata squashed pull request #1398, removed some comments, and added these notes:
* The old init.d script for the management daemon is replaced with a systemd service.
* A systemd service configuration is added to configure permissions for munin on startup.
* nginx SSL settings are updated because nginx's options and defaults have changed, and we now enable http2.
* Automatic SSHFP record generation is updated to know that 22 is the default SSH daemon port, since it is no longer explicit in sshd_config.
* The dovecot-lucene package is dropped because the Mail-in-a-Box PPA where we built the package has not been updated for Ubuntu 18.04.
* The stock postgrey package is installed instead of the one from our PPA (which we no longer support), which loses the automatic whitelisting of DNSWL.org-whitelisted senders.
* Drop memcached and the status check for memcached, which we used to use with ownCloud long ago but are no longer installing.
* Other minor changes.
nginx/postfix use a new pre-generated dh2048.pem file. dovecot generates the bits on its own.
ssllabs.com reports that TLS_DHE ciphers went from 1024 to 2048 bits as expected. The ECDHE ciphers remain at 256 bits --- no idea what that really means. (This tests nginx only. I haven't tested postfix/dovecot.)
see https://discourse.mailinabox.email/t/fips-ready-for-ssl-dhec-key-exchange/76/3
Doesn't seem like 2 minutes is a problem, but 4 minutes seems better. A little less bandwidth, possibly less battery usage (though we don't have evidence that's actually true), and the interval should be shorter than any peer timeouts that might occur due to inactivity
fixes#129
