Make sure the `ping` command used by `TestBridgeICC` actually has
the `-6` flag when it runs IPv6 test cases. Without this flag,
IPv6 connectivity isn't tested properly.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
When IPv6 is disabled in a container by, for example, using the --sysctl
option - an IPv6 address/gateway is still allocated. Don't attempt to
apply that config because doing so enables IPv6 on the interface.
Signed-off-by: Rob Murray <rob.murray@docker.com>
In a container-create API request, HostConfig.NetworkMode (the identity
of the "main" network) may be a name, id or short-id.
The configuration for that network, including preferred IP address etc,
may be keyed on network name or id - it need not match the NetworkMode.
So, when migrating the old container-wide MAC address to the new
per-endpoint field - it is not safe to create a new EndpointSettings
entry unless there is no possibility that it will duplicate settings
intended for the same network (because one of the duplicates will be
discarded later, dropping the settings it contains).
This change introduces a new API restriction, if the deprecated container
wide field is used in the new API, and EndpointsConfig is provided for
any network, the NetworkMode and key under which the EndpointsConfig is
store must be the same - no mixing of ids and names.
Signed-off-by: Rob Murray <rob.murray@docker.com>
When creating a new daemon in the `TestDaemonProxy`, reset the
`OTEL_EXPORTER_OTLP_ENDPOINT` to an empty value to disable OTEL
collection to avoid it hitting the proxy.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
StaticDirSource definition changed and can no longer be initialized from
the composite literal.
a80b48544c
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Don't change the behavior for older clients and keep the same behavior.
Otherwise client can't opt-out (because `ReadOnlyNonRecursive` is
unsupported before 1.44).
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Don't use OTEL tracing in this test because we're testing the HTTP proxy
behavior here and we don't want OTEL to interfere.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Prior to release 25.0.0, the bridge in an internal network was assigned
an IP address - making the internal network accessible from the host,
giving containers on the network access to anything listening on the
bridge's address (or INADDR_ANY on the host).
This change restores that behaviour. It does not restore the default
route that was configured in the container, because packets sent outside
the internal network's subnet have always been dropped. So, a 'connect()'
to an address outside the subnet will still fail fast.
Signed-off-by: Rob Murray <rob.murray@docker.com>
Replace regex matching/replacement and re-reading of generated files
with a simple parser, and struct to remember and manipulate the file
content.
Annotate the generated file with a header comment saying the file is
generated, but can be modified, and a trailing comment describing how
the file was generated and listing external nameservers.
Always start with the host's resolv.conf file, whether generating config
for host networking, or with/without an internal resolver - rather than
editing a file previously generated for a different use-case.
Resolves an issue where rewrites of the generated file resulted in
default IPv6 nameservers being unnecessarily added to the config.
Signed-off-by: Rob Murray <rob.murray@docker.com>
API v1.20 (Docker Engine v1.11.0) and older allowed a HostConfig to be passed
when starting a container. This feature was deprecated in API v1.21 (Docker
Engine v1.10.0) in 3e7405aea8, and removed in
API v1.23 (Docker Engine v1.12.0) in commit 0a8386c8be.
API v1.23 and older are deprecated, and this patch removes the feature.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This endpoint was deprecated in API v1.20 (Docker Engine v1.8.0) in
commit db9cc91a9e, in favor of the
`PUT /containers/{id}/archive` and `HEAD /containers/{id}/archive`
endpoints, and disabled in API v1.24 (Docker Engine v1.12.0) through
commit 428328908d.
This patch removes the endpoint, and the associated `daemon.ContainerCopy`
method in the backend.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The TestInspectAPIContainerResponse mentioned that Windows does not
support API versions before v1.25.
While technically, no stable release existed for Windows with API versions
before that (see f811d5b128), API version
v1.24 was enabled in e4af39aeb3, to have
a consistend fallback version for API version negotiation.
This patch updates the test to reflect that change.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
API v1.23 and older are deprecated, so we can remove the code to adjust
responses for API v1.19 and lower.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
API v1.20 and up produces an error when signalling / killing a non-running
container (see c92377e300). Older API versions
allowed this, and an exception was added in 621e3d8587.
API v1.23 and older are deprecated, so we can remove this handling.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Adds a test case for installing a plugin from a remote in the form
of `plugin-content-trust@sha256:d98f2f8061...`, which is currently
causing the daemon to panic, as we found while running the CLI e2e
tests:
```
docker plugin install registry:5000/plugin-content-trust@sha256:d98f2f806144bf4ba62d4ecaf78fec2f2fe350df5a001f6e3b491c393326aedb
```
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
Do not set 'Config.MacAddress' in inspect output unless the MAC address
is configured.
Also, make sure it is filled in for a configured address on the default
network before the container is started (by translating the network name
from 'default' to 'config' so that the address lookup works).
Signed-off-by: Rob Murray <rob.murray@docker.com>
The API's EndpointConfig struct has a MacAddress field that's used for
both the configured address, and the current address (which may be generated).
A configured address must be restored when a container is restarted, but a
generated address must not.
The previous attempt to differentiate between the two, without adding a field
to the API's EndpointConfig that would show up in 'inspect' output, was a
field in the daemon's version of EndpointSettings, MACOperational. It did
not work, MACOperational was set to true when a configured address was
used. So, while it ensured addresses were regenerated, it failed to preserve
a configured address.
So, this change removes that code, and adds DesiredMacAddress to the wrapped
version of EndpointSettings, where it is persisted but does not appear in
'inspect' results. Its value is copied from MacAddress (the API field) when
a container is created.
Signed-off-by: Rob Murray <rob.murray@docker.com>
To prevent a circular import between api/types and api/types image,
the RequestPrivilegeFunc reference was not moved, but defined as
part of the PullOptions / PushOptions.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Commit 8b7af1d0f added some code to update the DNSNames of all
endpoints attached to a sandbox by loading a new instance of each
affected endpoints from the datastore through a call to
`Network.EndpointByID()`.
This method then calls `Network.getEndpointFromStore()`, that in
turn calls `store.GetObject()`, which then calls `cache.get()`,
which calls `o.CopyTo(kvObject)`. This effectively creates a fresh
new instance of an Endpoint. However, endpoints are already kept in
memory by Sandbox, meaning we now have two in-memory instances of
the same Endpoint.
As it turns out, libnetwork is built around the idea that no two objects
representing the same thing should leave in-memory, otherwise breaking
mutex locking and optimistic locking (as both instances will have a drifting
version tracking ID -- dbIndex in libnetwork parliance).
In this specific case, this bug materializes by container rename failing
when applied a second time for a given container. An integration test is
added to make sure this won't happen again.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
Prior to 7a9b680a, the container short ID was added to the network
aliases only for custom networks. However, this logic wasn't preserved
in 6a2542d and now the cid is always added to the list of network
aliases.
This commit reintroduces the old logic.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
The MAC address of a running container was stored in the same place as
the configured address for a container.
When starting a stopped container, a generated address was treated as a
configured address. If that generated address (based on an IPAM-assigned
IP address) had been reused, the containers ended up with duplicate MAC
addresses.
So, remember whether the MAC address was explicitly configured, and
clear it if not.
Signed-off-by: Rob Murray <rob.murray@docker.com>
- add some asserts for unhandled errors
- use consts for fixed values, and slightly re-format Dockerfile contentt
- inline one-line Dockerfiles
- fix some vars to be properly camel-cased
- improve assert for error-types;
Before:
=== RUN TestBuildPlatformInvalid
build_test.go:685: assertion failed: expression is false: errdefs.IsInvalidParameter(err)
--- FAIL: TestBuildPlatformInvalid (0.01s)
FAIL
After:
=== RUN TestBuildPlatformInvalid
build_test.go:689: assertion failed: error is Error response from daemon: "foobar": unknown operating system or architecture: invalid argument (errdefs.errSystem), not errdefs.IsInvalidParameter
--- FAIL: TestBuildPlatformInvalid (0.01s)
FAIL
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Permit container network attachments to set any static IP address within
the network's IPAM master pool, including when a subpool is configured.
Users have come to depend on being able to statically assign container
IP addresses which are guaranteed not to collide with automatically-
assigned container addresses.
Signed-off-by: Cory Snider <csnider@mirantis.com>
