InvalidParameter is now compatible with errdefs.InvalidParameter. Thus,
these errors will now return a 400 status code instead of a 500.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
Embedded structs are part of the exported surface of a struct type.
Boxing a struct value into an interface value does not erase that;
any code could gain access to the embedded struct value with a simple
type assertion. The mutex is supposed to be a private implementation
detail, but *endpoint implements sync.Locker because the mutex is
embedded. Change the mutex to an unexported field so *endpoint no
longer spuriously implements the sync.Locker interface.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Basically every exported method which takes a libnetwork.Sandbox
argument asserts that the value's concrete type is *sandbox. Passing any
other implementation of the interface is a runtime error! This interface
is a footgun, and clearly not necessary. Export and use the concrete
type instead.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Embedded structs are part of the exported surface of a struct type.
Boxing a struct value into an interface value does not erase that;
any code could gain access to the embedded struct value with a simple
type assertion. The mutex is supposed to be a private implementation
detail, but *controller implements sync.Locker because the mutex is
embedded.
c, _ := libnetwork.New()
c.(sync.Locker).Lock()
Change the mutex to an unexported field so *controller no longer
spuriously implements the sync.Locker interface.
Signed-off-by: Cory Snider <csnider@mirantis.com>
libnetwork/etchosts/etchosts_test.go:167:54: empty-lines: extra empty line at the end of a block (revive)
libnetwork/osl/route_linux.go:185:74: empty-lines: extra empty line at the start of a block (revive)
libnetwork/osl/sandbox_linux_test.go:323:36: empty-lines: extra empty line at the start of a block (revive)
libnetwork/bitseq/sequence.go:412:48: empty-lines: extra empty line at the start of a block (revive)
libnetwork/datastore/datastore_test.go:67:46: empty-lines: extra empty line at the end of a block (revive)
libnetwork/datastore/mock_store.go:34:60: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/firewalld.go:202:44: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/firewalld_test.go:76:36: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/iptables.go:256:67: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/iptables.go:303:128: empty-lines: extra empty line at the start of a block (revive)
libnetwork/networkdb/cluster.go:183:72: empty-lines: extra empty line at the end of a block (revive)
libnetwork/ipams/null/null_test.go:44:38: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/macvlan/macvlan_store.go:45:52: empty-lines: extra empty line at the end of a block (revive)
libnetwork/ipam/allocator_test.go:1058:39: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/bridge/port_mapping.go:88:111: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/bridge/link.go:26:90: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/bridge/setup_ipv6_test.go:17:34: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/bridge/setup_ip_tables.go:392:4: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/bridge/bridge.go:804:50: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/ov_serf.go:183:29: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/ov_utils.go:81:64: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/overlay/peerdb.go:172:67: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/peerdb.go:209:67: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/peerdb.go:344:89: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/peerdb.go:436:63: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/overlay.go:183:36: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/encryption.go:69:28: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/overlay/ov_network.go:563:81: empty-lines: extra empty line at the start of a block (revive)
libnetwork/default_gateway.go:32:43: empty-lines: extra empty line at the start of a block (revive)
libnetwork/errors_test.go:9:40: empty-lines: extra empty line at the start of a block (revive)
libnetwork/service_common.go:184:64: empty-lines: extra empty line at the end of a block (revive)
libnetwork/endpoint.go:161:55: empty-lines: extra empty line at the end of a block (revive)
libnetwork/store.go:320:33: empty-lines: extra empty line at the end of a block (revive)
libnetwork/store_linux_test.go:11:38: empty-lines: extra empty line at the end of a block (revive)
libnetwork/sandbox.go:571:36: empty-lines: extra empty line at the start of a block (revive)
libnetwork/service_common.go:317:246: empty-lines: extra empty line at the start of a block (revive)
libnetwork/endpoint.go:550:17: empty-lines: extra empty line at the end of a block (revive)
libnetwork/sandbox_dns_unix.go:213:106: empty-lines: extra empty line at the start of a block (revive)
libnetwork/controller.go:676:85: empty-lines: extra empty line at the end of a block (revive)
libnetwork/agent.go:876:60: empty-lines: extra empty line at the end of a block (revive)
libnetwork/resolver.go:324:69: empty-lines: extra empty line at the end of a block (revive)
libnetwork/network.go:1153:92: empty-lines: extra empty line at the end of a block (revive)
libnetwork/network.go:1955:67: empty-lines: extra empty line at the start of a block (revive)
libnetwork/network.go:2235:9: empty-lines: extra empty line at the start of a block (revive)
libnetwork/libnetwork_internal_test.go:336:26: empty-lines: extra empty line at the start of a block (revive)
libnetwork/resolver_test.go:76:35: empty-lines: extra empty line at the end of a block (revive)
libnetwork/libnetwork_test.go:303:38: empty-lines: extra empty line at the end of a block (revive)
libnetwork/libnetwork_test.go:985:46: empty-lines: extra empty line at the end of a block (revive)
libnetwork/ipam/allocator_test.go:1263:37: empty-lines: extra empty line at the start of a block (revive)
libnetwork/errors_test.go:9:40: empty-lines: extra empty line at the end of a block (revive)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The correct formatting for machine-readable comments is;
//<some alphanumeric identifier>:<options>[,<option>...][ // comment]
Which basically means:
- MUST NOT have a space before `<identifier>` (e.g. `nolint`)
- Identified MUST be alphanumeric
- MUST be followed by a colon
- MUST be followed by at least one `<option>`
- Optionally additional `<options>` (comma-separated)
- Optionally followed by a comment
Any other format will not be considered a machine-readable comment by `gofmt`,
and thus formatted as a regular comment. Note that this also means that a
`//nolint` (without anything after it) is considered invalid, same for `//#nosec`
(starts with a `#`).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The second (sandbox) argument was unused, and it was only
used in a single location, so we may as well inline the
check.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
After moving libnetwork to this repo, we need to update all the import
paths for libnetwork to point to docker/docker/libnetwork instead of
docker/libnetwork.
This change implements that.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This is the heart of the scalability change for services in libnetwork.
The present routing mesh adds load-balancing rules for a network to
every container connected to the network. This newer approach creates a
load-balancing endpoint per network per node. For every service on a
network, libnetwork assigns the VIP of the service to the endpoint's
interface as an alias. This endpoint must have a unique IP address in
order to route return traffic to it. Traffic destined for a service's
VIP arrives at the load-balancing endpoint on the VIP and from there,
Linux load balances it among backend destinations while SNATing said
traffic to the endpoint's unique IP address.
The net result of this scheme is that each node in a swarm need only
have one set of load balancing state per service instead of one per
container on the node. This scheme is very similar to how services
currently operate on Windows nodes in libnetwork. It (as with Windows
nodes) costs the use of extra IP addresses in a network (one per node)
and an extra network hop in the stack, although, always in the stack
local to the container.
In order to prevent existing deployments from suddenly failing if they
failed to allocate sufficient address space to include per-node
load-balancing endpoint IP addresses, this patch preserves the existing
functionality and activates the new functionality on a per-network
basis depending on whether the network has a load-balancing endpoint.
Eventually, moby should always set this option when creating new
networks and should only omit it for networks created as part of a swarm
that are not marked to use endpoint load balancing.
This patch also normalizes the code to treat "load" and "balancer"
as two separate words from the perspectives of variable/function naming.
This means that the 'b' in "balancer" must be capitalized.
Signed-off-by: Chris Telfer <ctelfer@docker.com>
The system should remove cluster service info including networkDB
entries and DNS entries for container endpoints that are not part of a
service as well as those that are part of a service. This used to be
the normal sequence of operations but it moved to
sandbox.DisableService() in an effort to more gracefully handle endpoint
removal from a service (which proved insufficient). Unfortunately
subsequent changes also removed the newly-mandetory call to
sandbox.DisableService() preventing proper cleanup for non-service
container endpoints.
Signed-off-by: Chris Telfer <ctelfer@docker.com>
This patch attempts to allow endpoints to complete servicing connections
while being removed from a service. The change adds a flag to the
endpoint.deleteServiceInfoFromCluster() method to indicate whether this
removal should fully remove connectivity through the load balancer
to the endpoint or should just disable directing further connections to
the endpoint. If the flag is 'false', then the load balancer assigns
a weight of 0 to the endpoint but does not remove it as a linux load
balancing destination. It does remove the endpoint as a docker load
balancing endpoint but tracks it in a special map of "disabled-but-not-
destroyed" load balancing endpoints. This allows traffic to continue
flowing, at least under Linux. If the flag is 'true', then the code
removes the endpoint entirely as a load balancing destination.
The sandbox.DisableService() method invokes deleteServiceInfoFromCluster()
with the flag sent to 'false', while the endpoint.sbLeave() method invokes
it with the flag set to 'true' to complete the removal on endpoint
finalization. Renaming the endpoint invokes deleteServiceInfoFromCluster()
with the flag set to 'true' because renaming attempts to completely
remove and then re-add each endpoint service entry.
The controller.rmServiceBinding() method, which carries out the operation,
similarly gets a new flag for whether to fully remove the endpoint. If
the flag is false, it does the job of moving the endpoint from the
load balancing set to the 'disabled' set. It then removes or
de-weights the entry in the OS load balancing table via
network.rmLBBackend(). It removes the service entirely via said method
ONLY IF there are no more live or disabled load balancing endpoints.
Similarly network.addLBBackend() requires slight tweaking to properly
manage the disabled set.
Finally, this change requires propagating the status of disabled
service endpoints via the networkDB. Accordingly, the patch includes
both code to generate and handle service update messages. It also
augments the service structure with a ServiceDisabled boolean to convey
whether an endpoint should ultimately be removed or just disabled.
This, naturally, required a rebuild of the protocol buffer code as well.
Signed-off-by: Chris Telfer <ctelfer@docker.com>
This PR contains a fix for moby/moby#30321. There was a moby/moby#31142
PR intending to fix the issue by adding a delay between disabling the
service in the cluster and the shutdown of the tasks. However
disabling the service was not deleting the service info in the cluster.
Added a fix to delete service info from cluster and verified using siege
to ensure there is zero downtime on rolling update of a service.
Signed-off-by: abhi <abhi@docker.com>
changed the ipMap to SetMatrix to allow transient states
Compacted the addSvc and deleteSvc into a one single method
Updated the datastructure for backends to allow storing all the information needed
to cleanup properly during the cleanupServiceBindings
Removed the enable/disable Service logic that was racing with sbLeave/sbJoin logic
Add some debug logs to track further race conditions
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
- They are configuration-only networks which
can be used to supply the configuration
when creating regular networks.
- They do not get allocated and do net get plumbed.
Drivers do not get to know about them.
- They can be removed, once no other network is
using them.
- When user creates a network specifying a
configuration network for the config, no
other network specific configuration field
is are accepted. User can only specify
network operator fields (attachable, internal,...)
- They do not need to have a driver field, that
field gets actually reset upon creation.
Signed-off-by: Alessandro Boch <aboch@docker.com>
- Currently if the join fails, the gw endpoint becomes
stale and stays connected to the gw network.
- Also fix sbJoin to do the cleanup in case
setupDefaultGW() fails
Signed-off-by: Alessandro Boch <aboch@docker.com>
This fix tries to fix logrus formatting by removing `f` from
`logrus.[Error|Warn|Debug|Fatal|Panic|Info]f` when formatting string
is not present.
Also fix import name to use original project name 'logrus' instead of
'log'
Signed-off-by: Daehyeok Mun <daehyeok@gmail.com>
