After building docker from the git repo, you can run
```
./contrib/mac-install-bundle.sh install
```
and this will tell Docker for Mac to look for a bundle at the current
path to run instead of the built in version of Docker. This will persist
until you do a factory reset or run
```
./contrib/mac-install-bundle.sh undo
```
A factory reset is advised to reset as a development Docker may break your
install.
The path must be a path that is shared with Docker for Mac so that the VM
can find it - nothing is installed into the image.
This is in `contrib/` as it is a best effort attempt to make it easier for
Docker for Mac users to test master or pull requests. If it breaks anything
a factory reset is your friend.
Signed-off-by: Justin Cormack <justin.cormack@docker.com>
This appears to be missing. NAT (via iptables) is required in order to
setup Docker networking.
Signed-off-by: Charlie Drage <charlie@charliedrage.com>
When sending a build context to a remote server it may be
(significantly) advantageous to compress the build context. This commit
adds support for gz compression when constructing a build context
using a command like "docker build --compress ."
Signed-off-by: Paul Kehrer <paul.l.kehrer@gmail.com>
Add errexit to mkimage-yum bash script to abort early. This to prevent
disaster when mktemp fails and leave $target variable empty.
Signed-off-by: Carl Loa Odin <carlodin@gmail.com>
New driver options:
- `splunk-gzip` - gzip compress all requests to Splunk HEC
(enabled by default)
- `splunk-gzip-level` - change compression level.
Messages are sent in batches by 1000, with frequency of 5 seconds.
Maximum buffer is 10,000 events. If HEC will not be available, Splunk
Logging Driver will keep retrying while it can hold messages in buffer.
Added unit tests for driver.
Signed-off-by: Denis Gladkikh <denis@gladkikh.email>
With this patch and Docker PR 25883 ("Add a Dockerfile for generating
manpages on s390x") "make deb" creates the following packages for s390x:
# cd bundles/1.13.0-dev/build-deb/
# find .
.
./ubuntu-xenial
./ubuntu-xenial/docker-engine_1.13.0~dev~git20160823.161729.0.2693af4-0~xenial_s390x.deb
./ubuntu-xenial/docker-engine_1.13.0~dev~git20160823.161729.0.2693af4-0~xenial.dsc
./ubuntu-xenial/docker-engine_1.13.0~dev~git20160823.161729.0.2693af4-0~xenial_s390x.changes
./ubuntu-xenial/Dockerfile.build
./ubuntu-xenial/docker-engine_1.13.0~dev~git20160823.161729.0.2693af4-0~xenial.tar.gz
./docker.log
./test.log
Package "docker-engine_1.13.0~dev~git20160823.161729.0.2693af4-0~xenial_s390x.deb"
could be successfully installed on a s390x Ubuntu system:
# cat /etc/issue
Ubuntu 16.04.1 LTS \n \l
# dpkg -i docker-engine_1.13.0~dev~git20160823.161729.0.2693af4-0~xenial_s390x.deb
...
Installing new version of config file /etc/init.d/docker ...
Installing new version of config file /etc/init/docker.conf ...
Processing triggers for systemd (229-4ubuntu7) ...
Processing triggers for ureadahead (0.100.0-19) ...
Processing triggers for man-db (2.7.5-1) ...
# docker version
Client:
Version: 1.13.0-dev
API version: 1.25
Go version: go1.7
Git commit: 2693af4-unsupported
Built: Wed Aug 24 11:41:13 2016
OS/Arch: linux/s390x
Server:
...
The s390x "generate.sh" is a modified version of "ppc64le/generate.sh".
We removed seccomp for s390x because we need at least libseccomp version
2.3.1 which is not provided by Ubuntu Xenial.
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
docker is trying to set system.posix_acl_access but using BTRFS this fails if
CONFIG_BTRFS_FS_POSIX_ACL is not activated.
Signed-off-by: Andrei Gherzan <andrei@resin.io>
TMPDIR was changed to DOCKER_TMPDIR in pull request 7113 but the file still asks user to set TMPDIR.
I am new to docker and wasted sometime this morning because of this.
I am using docker version 1.12.1 on ubuntu server 14.04
Signed-off-by: Neyazul Haque <nuhaque@gmail.com>
This PR adds the ability to make docker debs for xenial on power
Signed-off-by: Christopher Jones <tophj@linux.vnet.ibm.com>
Signed-off-by: Christopher Jones <tophj@linux.vnet.ibm.com>
`--log-opt splunk-format=inline|json|raw` allows to change how logging
driver sends data to Splunk, where
`inline` - default value, format used before, message is injected as a
line in JSON payload
`json` - driver will try to parse each line as a JSON object and embed it
inside of the JSON payload
`raw` - driver will send Raw payload instead of JSON, tag and attributes
will be prefixed before the message
`--log-opt splunk-verify-connection=true|false` - allows to skip
verification for Splunk Url
Signed-off-by: Denis Gladkikh <denis@gladkikh.email>
added the firewalld.service symbol in the After line docker
will always start after firewalld, thus eliminating the issue
of firewall blocking all mapped traffic.
Signed-off-by: Ramon Brooker <Ramon.Brooker@imaginecommunications.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
With the latest OL7.2, selinux policy that is shipped
might not be the latest for it to work or build with
selinux policy for docker-1.12.
To be able to achieve that here is what is done:
1. Added systemd_machined policy which is part of systemd.
2. Temporarily comment out unconfined_typebounds because the
current OL7's selinux doesn't have unconfineduser selinux policy,
to include this will be too much. Will revisit this once we have
updated the selinux policy.
Fixes: #24612
Signed-off-by: Thomas Tanaka <thomas.tanaka@oracle.com>
This change allows btrfs subvolumes to be found in additional system
configurations. The old logic failed to correctly identify subvolumes
when the root fs was mounted as a subvolume that was not the btrfs
filesystem root.
Signed-off-by: Adam Mills <adam@armills.info>
This adds the ability to have different profiles for individual distros
and versions of the distro because they all ship with and depend on
different versions of policy packages.
The `selinux` dir contains the unmodified policy that is being used
today. The `selinux-fedora` dir contains the new policy for fedora 24
with the changes for it to compile and work on the system.
The fedora policy is from commit
4a6ce94da5
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Rather than conflict with the unexposed task model, change the names of
the object-oriented task display to `docker <object> ps`. The command
works identically to `docker service tasks`. This change is superficial.
This provides a more sensical docker experience while not trampling on
the task model that may be introduced as a top-level command at a later
date.
The following is an example of the display using `docker service ps`
with a service named `condescending_cori`:
```
$ docker service ps condescending_cori
ID NAME SERVICE IMAGE LAST STATE DESIRED STATE NODE
e2cd9vqb62qjk38lw65uoffd2 condescending_cori.1 condescending_cori alpine Running 13 minutes ago Running 6c6d232a5d0e
```
The following shows the output for the node on which the command is
running:
```console
$ docker node ps self
ID NAME SERVICE IMAGE LAST STATE DESIRED STATE NODE
b1tpbi43k1ibevg2e94bmqo0s mad_kalam.1 mad_kalam apline Accepted 2 seconds ago Accepted 6c6d232a5d0e
e2cd9vqb62qjk38lw65uoffd2 condescending_cori.1 condescending_cori alpine Running 12 minutes ago Running 6c6d232a5d0e
4x609m5o0qyn0kgpzvf0ad8x5 furious_davinci.1 furious_davinci redis Running 32 minutes ago Running 6c6d232a5d0e
```
Signed-off-by: Stephen J Day <stephen.day@docker.com>
While testing #24510 I noticed that 32 bit syscalls were incorrectly being
blocked and we did not have a test for this, so adding one.
This is only tested on amd64 as it is the only architecture that
reliably supports 32 bit code execution, others only do sometimes.
There is no 32 bit libc in the buildpack-deps so we cannot build
32 bit C code easily so use the simplest assembly program which
just calls the exit syscall.
Signed-off-by: Justin Cormack <justin.cormack@docker.com>
This changes the default behavior so that rolling updates will not
proceed once an updated task fails to start, or stops running during the
update. Users can use docker service inspect --pretty servicename to see
the update status, and if it pauses due to a failure, it will explain
that the update is paused, and show the task ID that caused it to pause.
It also shows the time since the update started.
A new --update-on-failure=(pause|continue) flag selects the
behavior. Pause means the update stops once a task fails, continue means
the old behavior of continuing the update anyway.
In the future this will be extended with additional behaviors like
automatic rollback, and flags controlling parameters like how many tasks
need to fail for the update to stop proceeding. This is a minimal
solution for 1.12.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
There are currently problems with "swarm init" and "swarm join" when an
explicit --listen-addr flag is not provided. swarmkit defaults to
finding the IP address associated with the default route, and in cloud
setups this is often the wrong choice.
Introduce a notion of "advertised address", with the client flag
--advertise-addr, and the daemon flag --swarm-default-advertise-addr to
provide a default. The default listening address is now 0.0.0.0, but a
valid advertised address must be detected or specified.
If no explicit advertised address is specified, error out if there is
more than one usable candidate IP address on the system. This requires a
user to explicitly choose instead of letting swarmkit make the wrong
choice. For the purposes of this autodetection, we ignore certain
interfaces that are unlikely to be relevant (currently docker*).
The user is also required to choose a listen address on swarm init if
they specify an explicit advertise address that is a hostname or an IP
address that's not local to the system. This is a requirement for
overlay networking.
Also support specifying interface names to --listen-addr,
--advertise-addr, and the daemon flag --swarm-default-advertise-addr.
This will fail if the interface has multiple IP addresses (unless it has
a single IPv4 address and a single IPv6 address - then we resolve the
tie in favor of IPv4).
This change also exposes the node's externally-reachable address in
docker info, as requested by #24017.
Make corresponding API and CLI docs changes.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Swarm join has been changed in f5e1f6f688,
removing various options and the "node accept" command.
This removes the removed options from the completion
scripts.
NOTE: a new command ("docker swarm join-token") was
also added, but is not part of this commit.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Implement the proposal from
https://github.com/docker/docker/issues/24430#issuecomment-233100121
Removes acceptance policy and secret in favor of an automatically
generated join token that combines the secret, CA hash, and
manager/worker role into a single opaque string.
Adds a docker swarm join-token subcommand to inspect and rotate the
tokens.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Fixes#23981
The selinux issue we are seeing in the report is related to the socket
file for docker and nothing else. By removing the socket docker starts
up correctly.
However, there is another motivation for removing socket activation from
docker's systemd files and that is because when you have daemons running
with --restart always whenever you have a host reboot those daemons
will not be started again because the docker daemon is not started by
systemd until a request comes into the docker API.
Leave it for deb based systems because everything is working correctly
for both socket activation and starting normally at boot.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
following the announcement;
https://groups.google.com/forum/m/#!topic/golang-announce/7JTsd70ZAT0
> [security] Go 1.6.3 and Go 1.7rc2 pre-announcement
>
> Hello gophers,
> We plan to issue Go 1.6.3 and Go 1.7rc2 on Monday July 18 at approximately 2am UTC.
> These are minor release to fix a security issue.
>
> Following our policy at https://golang.org/security, this is the pre-announcement of those releases.
>
> Because we are so late in the release cycle for Go 1.7, we will not issue a minor release of Go 1.5.
> Additionally, we plan to issue Go 1.7rc3 later next week, which will include any changes between 1.7rc1 and tip.
>
> Cheers,
> Chris on behalf of the Go team
**Note:**
the man/Dockerfile is not yet updated, because
the official image for Go 1.6.2 has not yet
been updated.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This adds the `--live-restore` option to the documentation.
Also synched usage description in the documentation
with the actual description, and re-phrased some
flag descriptions to be a bit more consistent.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(and set $exec to dockerd instead)
This ensures end users do not need to make any configuration changes
due to the rename from docker to dockerd in version 1.12.
Signed-off-by: Paul Furtado <pfurtado@hubspot.com>
There is a not-insignificant performance overhead for all containers (if
containerd is a child of Docker, which is the current setup) if rlimits are
set on the main Docker daemon process (because the limits
propogate to all children).
We recommend using cgroups to do container-local accounting.
This applies the change added in 8db61095a3
to other init scripts.
Note that nfile cannot be set to unlimited, and the limit
is hardcoded to 1048576 (2^20) , see:
http://stackoverflow.com/a/1213069/1811501
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
