v0.13.1
- Refactor `ParsePortSpec` to handle IPv6 addresses, and improve validation
v0.13.0
- `rootlesskit --pidns`: fix propagating exit status
- Support cgroup2 evacuation, e.g., `systemd-run -p Delegate=yes --user -t rootlesskit --cgroupns --pidns --evacuate-cgroup2=evac --net=slirp4netns bash`
v0.12.0
- Port forwarding API now supports setting `ChildIP`
- The `vendor` directory is no longer included in this repo. Run `go mod vendor` if you need
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
full diff: https://github.com/opencontainers/runc/compare/v1.0.0-rc92...v1.0.0-rc93
release notes: https://github.com/opencontainers/runc/releases/tag/v1.0.0-rc93
Release notes for runc v1.0.0-rc93
-------------------------------------------------
This is the last feature-rich RC release and we are in a feature-freeze until
1.0. 1.0.0~rc94 will be released in a few weeks with minimal bug fixes only,
and 1.0.0 will be released soon afterwards.
- runc's cgroupv2 support is no longer considered experimental. It is now
believed to be fully ready for production deployments. In addition, runc's
cgroup code has been improved:
- The systemd cgroup driver has been improved to be more resilient and
handle more systemd properties correctly.
- We now make use of openat2(2) when possible to improve the security of
cgroup operations (in future runc will be wholesale ported to libpathrs to
get this protection in all codepaths).
- runc's mountinfo parsing code has been reworked significantly, making
container startup times significantly faster and less wasteful in general.
- runc now has special handling for seccomp profiles to avoid making new
syscalls unusable for glibc. This is done by installing a custom prefix to
all seccomp filters which returns -ENOSYS for syscalls that are newer than
any syscall in the profile (meaning they have a larger syscall number).
This should not cause any regressions (because previously users would simply
get -EPERM rather than -ENOSYS, and the rule applied above is the most
conservative rule possible) but please report any regressions you find as a
result of this change -- in particular, programs which have special fallback
code that is only run in the case of -EPERM.
- runc now supports the following new runtime-spec features:
- The umask of a container can now be specified.
- The new Linux 5.9 capabilities (CAP_PERFMON, CAP_BPF, and
CAP_CHECKPOINT_RESTORE) are now supported.
- The "unified" cgroup configuration option, which allows users to explicitly
specify the limits based on the cgroup file names rather than abstracting
them through OCI configuration. This is currently limited in scope to
cgroupv2.
- Various rootless containers improvements:
- runc will no longer cause conflicts if a user specifies a custom device
which conflicts with a user-configured device -- the user device takes
precedence.
- runc no longer panics if /sys/fs/cgroup is missing in rootless mode.
- runc --root is now always treated as local to the current working directory.
- The --no-pivot-root hardening was improved to handle nested mounts properly
(please note that we still strongly recommend that users do not use
--no-pivot-root -- it is still an insecure option).
- A large number of code cleanliness and other various cleanups, including
fairly large changes to our tests and CI to make them all run more
efficiently.
For packagers the following changes have been made which will have impact on
your packaging of runc:
- The "selinux" and "apparmor" buildtags have been removed, and now all runc
builds will have SELinux and AppArmor support enabled. Note that "seccomp"
is still optional (though we very highly recommend you enable it).
- make install DESTDIR= now functions correctly.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
NOTE: the Dockerfile currently uses a single version of Golang for all
stages. This means that currently, all binaries are built with Go
1.13.x, including the containerd binary; upstream containerd switched
to use Go 1.15.
full diff: https://github.com/containerd/containerd/compare/v1.4.1...v1.4.2
Release notes:
Welcome to the v1.4.2 release of containerd!
------------------------------------------------------
The second patch release for containerd 1.4 includes multiple minor fixes
and updates.
Notable Updates
- Fix bug limiting the number of layers by default containerd/cri#1602
- Fix selinux shared memory issue by relabeling /dev/shm containerd/cri#1605
- Fix unknown state preventing removal of containers containerd/containerd#4656
- Fix nil pointer error when restoring checkpoint containerd/containerd#4754
- Improve image pull performance when using HTTP 1.1 containerd/containerd#4653
- Update default seccomp profile for pidfd containerd/containerd#4730
- Update Go to 1.15
Windows
- Fix integer overflow on Windows containerd/containerd#4589
- Fix lcow snapshotter to read trailing tar data containerd/containerd#4628
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This test validates that `RUN` and `COPY` both target a read-write
sandbox on Windows that is configured according to the daemon's
`storage-opts` setting.
Sadly, this is a slow test, so we need to bump the timeout to 60 minutes
from the default of 10 minutes.
Signed-off-by: Paul "TBBle" Hampson <Paul.Hampson@Pobox.com>
It turns out that the Finally block does not see the exit code from the
`exit` call that triggered it, but from an earlier state. And it seems
that actions take in the Finally block other than `exit` will not affect
the $LastErrorCode set by the `exit` that triggered the Finally block.
Signed-off-by: Paul "TBBle" Hampson <Paul.Hampson@Pobox.com>
Otherwise the cache gets written to bundles instead of to the volume
that we setup in the Makefile as expected.
Found this because vscode did not like having these huge objects in
bundles/ (didn't harm anything, just that it noticed and said hey I don't
like that).
This enables cache-reuse when building the test binaries.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
We were using "go get", whith would try to fetch some dependencies
that are not in the version we're installing,
go get -d github.com/golangci/golangci-lint/cmd/golangci-lint
Causing the build to fail;
package 4d63.com/gochecknoglobals/checknoglobals: unrecognized import path "4d63.com/gochecknoglobals/checknoglobals" (parse https://4d63.com/gochecknoglobals/checknoglobals?go-get=1: no go-import meta tags ())
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
full diff: https://github.com/containerd/containerd/compare/v1.4.0...v1.4.1
Welcome to the v1.4.1 release of containerd!
The first patch release for `containerd` 1.4 includes a fix for v1 shims hanging
on exit and exec when the log pipe fills up along with other minor changes.
Notable Updates:
* Always consume shim logs to prevent logs in the shim from blocking
* Fix error deleting v2 bundle directory when removing rootfs returns `ErrNotExist`
* Fix metrics monitoring of v2 runtime tasks
* Fix incorrect stat for Windows containers
* Fix devmapper device deletion on rollback
* Update seccomp default profile
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
For CI, a temporary `DOCKER_ALLOW_SCHEMA1_PUSH_DONOTUSE` environment
variable was added while we work out a solution for testing schema 1
pulls (which currently require pushing them to a local registry first
for testing).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
full diff: 2e24aed516...9e99af28df
- docker/libnetwork#2548 Add docker interfaces to firewalld docker zone
- fixesdocker/for-linux#957 DNS Not Resolving under Network [CentOS8]
- fixesdocker/libnetwork#2496 Port Forwarding does not work on RHEL 8 with Firewalld running with FirewallBackend=nftables
- store.getNetworksFromStore() remove unused error return
- docker/libnetwork#2554 Fix 'failed to get network during CreateEndpoint'
- fixes/addresses docker/for-linux#888 failed to get network during CreateEndpoint
- docker/libnetwork#2558 [master] bridge: disable IPv6 router advertisements
- docker/libnetwork#2563 log error instead if disabling IPv6 router advertisement failed
- fixesdocker/for-linux#1033 Shouldn't be fatal: Unable to disable IPv6 router advertisement: open /proc/sys/net/ipv6/conf/docker0/accept_ra: read-only file system
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
When using go modules, `go build` will always fetch the latest
version of the package, so ignores the version we previously `go get`'d.
Instead of running `go get` and `go build` separately, this patch uses
`go get` (without the `-d` option) to do it all in one step.
Given that this binary is only used for testing, and only used inside the
Dockerfile, we should consider inlining this step in the Dockerfile itself,
but keeping that separate for now.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Usage: DOCKER_BUILD_ARGS="--build-arg CONTAINERD_COMMIT=master --build-arg RUNC_COMMIT=master" DOCKER_EXPERIMENTAL=1 TEST_SKIP_INTEGRATION_CLI=1 make test-integration
Depends on containerd master (v1.4) and runc master (v1.0.0-rc91).
Currently `TEST_SKIP_INTEGRATION_CLI=1` must be specified.
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
