This reverts commit 98fc09128b in order to
keep registry v2 schema1 handling and libtrust-key-based engine ID.
Because registry v2 schema1 was not officially deprecated and
registries are still relying on it, this patch puts its logic back.
However, registry v1 relics are not added back since v1 logic has been
removed a while ago.
This also fixes an engine upgrade issue in a swarm cluster. It was relying
on the Engine ID to be the same upon upgrade, but the mentioned commit
modified the logic to use UUID and from a different file.
Since the libtrust key is always needed to support v2 schema1 pushes,
that the old engine ID is based on the libtrust key, and that the engine ID
needs to be conserved across upgrades, adding a UUID-based engine ID logic
seems to add more complexity than it solves the problems.
Hence reverting the engine ID changes as well.
Signed-off-by: Tibor Vass <tibor@docker.com>
(cherry picked from commit f695e98cb7)
Signed-off-by: Tibor Vass <tibor@docker.com>
The `--rootless` flag had a couple of issues:
* #38702: euid=0, $USER="root" but no access to cgroup ("rootful" Docker in rootless Docker)
* #39009: euid=0 but $USER="docker" (rootful boot2docker)
To fix#38702, XDG dirs are ignored as in rootful Docker, unless the
dockerd is directly running under RootlessKit namespaces.
RootlessKit detection is implemented by checking whether `$ROOTLESSKIT_STATE_DIR` is set.
To fix#39009, the non-robust `$USER` check is now completely removed.
The entire logic can be illustrated as follows:
```
withRootlessKit := getenv("ROOTLESSKIT_STATE_DIR")
rootlessMode := withRootlessKit || cliFlag("--rootless")
honorXDG := withRootlessKit
useRootlessKitDockerProxy := withRootlessKit
removeCgroupSpec := rootlessMode
adjustOOMScoreAdj := rootlessMode
```
Close#39024Fix#38702#39009
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
(cherry picked from commit 3518383ed9)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
`defer r.WaitTimeout(10s)` was in a wrong place and had caused the
daemon to hang for 10 seconds.
Fix#39025
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: John Howard <jhoward@microsoft.com>
This is the first step in refactoring moby (dockerd) to use containerd on Windows.
Similar to the current model in Linux, this adds the option to enable it for runtime.
It does not switch the graphdriver to containerd snapshotters.
- Refactors libcontainerd to a series of subpackages so that either a
"local" containerd (1) or a "remote" (2) containerd can be loaded as opposed
to conditional compile as "local" for Windows and "remote" for Linux.
- Updates libcontainerd such that Windows has an option to allow the use of a
"remote" containerd. Here, it communicates over a named pipe using GRPC.
This is currently guarded behind the experimental flag, an environment variable,
and the providing of a pipename to connect to containerd.
- Infrastructure pieces such as under pkg/system to have helper functions for
determining whether containerd is being used.
(1) "local" containerd is what the daemon on Windows has used since inception.
It's not really containerd at all - it's simply local invocation of HCS APIs
directly in-process from the daemon through the Microsoft/hcsshim library.
(2) "remote" containerd is what docker on Linux uses for it's runtime. It means
that there is a separate containerd service running, and docker communicates over
GRPC to it.
To try this out, you will need to start with something like the following:
Window 1:
containerd --log-level debug
Window 2:
$env:DOCKER_WINDOWS_CONTAINERD=1
dockerd --experimental -D --containerd \\.\pipe\containerd-containerd
You will need the following binary from github.com/containerd/containerd in your path:
- containerd.exe
You will need the following binaries from github.com/Microsoft/hcsshim in your path:
- runhcs.exe
- containerd-shim-runhcs-v1.exe
For LCOW, it will require and initrd.img and kernel in `C:\Program Files\Linux Containers`.
This is no different to the current requirements. However, you may need updated binaries,
particularly initrd.img built from Microsoft/opengcs as (at the time of writing), Linuxkit
binaries are somewhat out of date.
Note that containerd and hcsshim for HCS v2 APIs do not yet support all the required
functionality needed for docker. This will come in time - this is a baby (although large)
step to migrating Docker on Windows to containerd.
Note that the HCS v2 APIs are only called on RS5+ builds. RS1..RS4 will still use
HCS v1 APIs as the v2 APIs were not fully developed enough on these builds to be usable.
This abstraction is done in HCSShim. (Referring specifically to runtime)
Note the LCOW graphdriver still uses HCS v1 APIs regardless.
Note also that this does not migrate docker to use containerd snapshotters
rather than graphdrivers. This needs to be done in conjunction with Linux also
doing the same switch.
As people are using the UUID in `docker info` that was based on the v1 manifest signing key, replace
with a UUID instead.
Remove deprecated `--disable-legacy-registry` option that was scheduled to be removed in 18.03.
Signed-off-by: Justin Cormack <justin.cormack@docker.com>
Please refer to `docs/rootless.md`.
TLDR:
* Make sure `/etc/subuid` and `/etc/subgid` contain the entry for you
* `dockerd-rootless.sh --experimental`
* `docker -H unix://$XDG_RUNTIME_DIR/docker.sock run ...`
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Adds a supervisor package for starting and monitoring containerd.
Separates grpc connection allowing access from daemon.
Signed-off-by: Derek McGowan <derek@mcgstyle.net>
Disable cri plugin by default in containerd and
allows an option to enable the plugin. This only
has an effect on containerd when supervised by
dockerd. When containerd is managed outside of
dockerd, the configuration is not effected.
Signed-off-by: Derek McGowan <derek@mcgstyle.net>
dockerd allows the `--log-level` to be specified, but this log-level
was not forwarded to the containerd process.
This patch sets containerd's log-level to the same as dockerd if a
custom level is provided.
Now that `--log-level` is also passed to containerd, the default "info"
is removed, so that containerd's default (or the level configured in containerd.toml)
is still used if no log-level is set.
Before this change:
containerd would always be started without a log-level set (only the level that's configured in `containerd.toml`);
```
root 1014 2.5 2.1 496484 43468 pts/0 Sl+ 12:23 0:00 dockerd
root 1023 1.2 1.1 681768 23832 ? Ssl 12:23 0:00 \_ docker-containerd --config /var/run/docker/containerd/containerd.toml
```
After this change:
when running `dockerd` without options (same as current);
```
root 1014 2.5 2.1 496484 43468 pts/0 Sl+ 12:23 0:00 dockerd
root 1023 1.2 1.1 681768 23832 ? Ssl 12:23 0:00 \_ docker-containerd --config /var/run/docker/containerd/containerd.toml
```
when running `dockerd --debug`:
```
root 600 0.8 2.1 512876 43180 pts/0 Sl+ 12:20 0:00 dockerd --debug
root 608 0.6 1.1 624428 23672 ? Ssl 12:20 0:00 \_ docker-containerd --config /var/run/docker/containerd/containerd.toml --log-level debug
```
when running `dockerd --log-level=panic`
```
root 747 0.6 2.1 496548 43996 pts/0 Sl+ 12:21 0:00 dockerd --log-level=panic
root 755 0.7 1.1 550696 24100 ? Ssl 12:21 0:00 \_ docker-containerd --config /var/run/docker/containerd/containerd.toml --log-level panic
```
combining `--debug` and `--log-level` (`--debug` takes precedence):
```
root 880 2.7 2.1 634692 43336 pts/0 Sl+ 12:23 0:00 dockerd --debug --log-level=panic
root 888 1.0 1.1 616232 23652 ? Ssl 12:23 0:00 \_ docker-containerd --config /var/run/docker/containerd/containerd.toml --log-level debug
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This moves some of the code that was conditionally
executed on Windows to a separate, windows-only file.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Changes most references of syscall to golang.org/x/sys/
Ones aren't changes include, Errno, Signal and SysProcAttr
as they haven't been implemented in /x/sys/.
Signed-off-by: Christopher Jones <tophj@linux.vnet.ibm.com>
[s390x] switch utsname from unsigned to signed
per 33267e036f
char in s390x in the /x/sys/unix package is now signed, so
change the buildtags
Signed-off-by: Christopher Jones <tophj@linux.vnet.ibm.com>
Allows storing key under any directory. In the case where the
"/etc/docker" directory is not preserved, this file can be
specified to a location where it will be preserved to ensure
the ID does not change across restarts.
Note this key is currently only used today to generate the ID
used in Docker info and for manifest schema v1 pushes. The key
signature and finger on these manifests are not checked or
used any longer for security, deprecated by notary.
Removes old key migration from a pre-release of Docker which put
the key under the home directory and was used to preserve ID used
for swarm v1 after the file moved.
closes#32135
Signed-off-by: Derek McGowan <derek@mcgstyle.net>
Right now docker puts swarm's control socket into the docker root dir
(e.g. /var/lib/docker).
This can cause some nasty issues with path length being > 108
characters, especially in our CI environment.
Since we already have some other state going in the daemon's exec root
(libcontainerd and libnetwork), I think it makes sense to move the
control socket to this location, especially since there are other unix
sockets being created here by docker so it must always be at a path that
works.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This adds an `--oom-score-adjust` flag to the daemon so that the value
provided can be set for the docker daemon's process. The default value
for the flag is -500. This will allow the docker daemon to have a
less chance of being killed before containers do. The default value for
processes is 0 with a min/max of -1000/1000.
-500 is a good middle ground because it is less than the default for
most processes and still not -1000 which basically means never kill this
process in an OOM condition on the host machine. The only processes on
my machine that have a score less than -500 are dbus at -900 and sshd
and xfce( my window manager ) at -1000. I don't think docker should be
set lower, by default, than dbus or sshd so that is why I chose -500.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
This flags enables full support of daemonless containers in docker. It
ensures that docker does not stop containers on shutdown or restore and
properly reconnects to the container when restarted.
This is not the default because of backwards compat but should be the
desired outcome for people running containers in prod.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
This adds support for Windows dockerd to run as a Windows service, managed
by the service control manager. The log is written to the Windows event
log (and can be viewed in the event viewer or in PowerShell). If there is
a Go panic, the stack is written to a file panic.log in the Docker root.
Signed-off-by: John Starks <jostarks@microsoft.com>
