This fix tries to address 27902 by adding a flag `--host`
to `docker service create` and `--host-add/--host-rm` to
`docker service update`, so that it is possible to
specify extra `host:ip` settings in `/etc/hosts`.
This fix adds `Hosts` in swarmkit's `ContainerSpec` so that it
is possible to specify extra hosts during service creation.
Related docs has been updated.
An integration test has been added.
This fix fixes 27902.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix is a follow up to #27567 based on:
https://github.com/docker/docker/pull/27567#issuecomment-259295055
In #27567, `--dns-options` has been added to `service create/update`,
together with `--dns` and `--dns-search`. The `--dns-opt` was used
in `docker run`.
This fix add `--dns-option` (not `--dns-options`) to `docker run/create`, and hide
`--dns-opt`. It is still possible to use `--dns-opt` with
`docker run/create`, though it will not show up in help output.
This fix change `--dns-options`to --dns-option` for `docker service create`
and `docker service update`.
This fix also updates the docs and bash/zsh completion scripts.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix adds `--dns-add`, `--dns-rm`, `--dns-opt-add`, `--dns-opt-rm`,
`--dns-search-add` and `--dns-search-rm` to `service update`.
An integration test and a unit test have been added to cover the changes in this fix.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to fix the issue raised in 24391 about allowing
custom DNS settings to service definition.
This fix adds `DNSConfig` (`Nameservers`, `Options`, `Search`) to
service definition, as well as `--dns`, `--dns-opt`, and `dns-search`
to `service create`.
An integration test has been added to cover the changes in this fix.
This fix fixes 24391.
A PR in swarmkit will be created separately.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to add `--tty` to `docker service create/update`. As was
specified in 25644, `TTY` flag has been added to SwarmKit and is
already vendored.
This fix add `--tty` to `docker service create/update`.
Related document has been updated.
Additional integration tests has been added.
This fix fixes 25644.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
When a container is attached to an "--attachable" network, it strictly
forms the attacherKey using either the network-id or network-name
because at the time of attachment, the daemon may not have the network
downloaded locally from the manager. Hence, when the NetworkDettach is
called, it should use either network-name or network-id. This fix
addresses the missing network-id based dettachment case.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
When a container is run on a --attachable network, the endpoint
configs passed by the user were incorrectly overwritten.
Copy the relevant configs instead of overwriting the entire configs.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
--group-add was used for specifying groups for both service create
and service update. For create it was confusing since we don't have
an existing set of groups. Instead I added --group to create, and
moved --group-add to service update only, like --group-rm
This deals with issue 27646
Signed-off-by: Lily Guo <lily.guo@docker.com>
Update flag documentation
Specify that --group, --group-add and --groupd-rm refers to
supplementary user groups
Signed-off-by: Lily Guo <lily.guo@docker.com>
Fix docs for groups and update completion scripts
Signed-off-by: Lily Guo <lily.guo@docker.com>
This fix tries to address the issue in 24712 and add
`--env-file` file to `docker create service`.
Related documentation has been updated.
An additional integration has been added.
This fix fixes 24712.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This adds support for two enhancements to swarm service rolling updates:
- Failure thresholds: In Docker 1.12, a service update could be set up
to either pause or continue after a single failure occurs. This adds
an --update-max-failure-ratio flag that controls how many tasks need to
fail to update for the update as a whole to be considered a failure. A
counterpart flag, --update-monitor, controls how long to monitor each
task for a failure after starting it during the update.
- Rollback flag: service update --rollback reverts the service to its
previous version. If a service update encounters task failures, or
fails to function properly for some other reason, the user can roll back
the update.
SwarmKit also has the ability to roll back updates automatically after
hitting the failure thresholds, but we've decided not to expose this in
the Docker API/CLI for now, favoring a workflow where the decision to
roll back is always made by an admin. Depending on user feedback, we may
add a "rollback" option to --update-failure-action in the future.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
As of https://github.com/docker/swarmkit/pull/1607, swarmkit honors
global network plugins while allocating network resources.
This IT covers the e2e integration between libnetwork, swarmkit and
docker engine to support global network-plugins for swarm-mode
Signed-off-by: Madhu Venugopal <madhu@docker.com>
This fix tries to address the issue related to 24108 and 24790, and
also the case from 24620#issuecomment-233715656
The reason for the failure case in the above mentioned issues is that
currently Task names are actually indexed by Service Name
(`e.ServiceAnnotations.Name`)
To fix it, a pull request in swarmkit (swarmkit/pull/1193) has been
opened separately.
This fix adds the integration tests for the above mentioned issues.
Swarmkit revendoring is needed to completely fix the issues.
This fix fixes 24108.
This fix fixes 24790.
This fix is related to 24620.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the issue raised in 24538
where the error message is unclear when removing pre-defined networks:
```
docker network rm ingress
Error response from daemon: rpc error: code = 7 desc = 4vlxuzpk8bxdsxpyvkxluol5g is a pre-defined network and cannot be removed
```
This fix improve the error message so that if network's name is specified
in the `RemoveNetwork`, then error message will contain the name and the ID
(instead of just an ID):
```
docker network rm ingress
Error response from daemon: rpc error: code = 7 desc = ingress (4vlxuzpk8bxdsxpyvkxluol5g) is a pre-defined network and cannot be removed
```
An integration test has been added to cover the changes.
This fix fixes 24538.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
The swarm scope network connected containers with autostart enabled
there was a dependency problem with the cluster to be initialized before
we can autostart them. With the current container restart code happening
before cluster init, these containers were not getting autostarted
properly. Added a fix to delay the container start of those containers
which has atleast one swarm scope endpoint to until after the cluster is
initialized.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
This fix tries to address the issue raised in 25304 to support
`--group-add` and `--group-rm` in `docker service create`.
This fix adds `--group-add` to `docker service create` and `docker service update`,
adds `--group-rm` to `docker service update`.
This fix updates docs for `docker service create` and `docker service update`:
1. Add `--group-add` to `docker service create` and `docker service update`
2. Add `--group-rm` to `docker service update`
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the issue raised in 25375 where
`service update --publish-add` returns an error if the exact
same value is repeated (idempotent).
This fix use a map to filter out repeated port configs so
that `--publish-add` does not error out.
An integration test has been added.
This fix fixes 25375.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Rather than conflict with the unexposed task model, change the names of
the object-oriented task display to `docker <object> ps`. The command
works identically to `docker service tasks`. This change is superficial.
This provides a more sensical docker experience while not trampling on
the task model that may be introduced as a top-level command at a later
date.
The following is an example of the display using `docker service ps`
with a service named `condescending_cori`:
```
$ docker service ps condescending_cori
ID NAME SERVICE IMAGE LAST STATE DESIRED STATE NODE
e2cd9vqb62qjk38lw65uoffd2 condescending_cori.1 condescending_cori alpine Running 13 minutes ago Running 6c6d232a5d0e
```
The following shows the output for the node on which the command is
running:
```console
$ docker node ps self
ID NAME SERVICE IMAGE LAST STATE DESIRED STATE NODE
b1tpbi43k1ibevg2e94bmqo0s mad_kalam.1 mad_kalam apline Accepted 2 seconds ago Accepted 6c6d232a5d0e
e2cd9vqb62qjk38lw65uoffd2 condescending_cori.1 condescending_cori alpine Running 12 minutes ago Running 6c6d232a5d0e
4x609m5o0qyn0kgpzvf0ad8x5 furious_davinci.1 furious_davinci redis Running 32 minutes ago Running 6c6d232a5d0e
```
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This is an attempt to fix the flaky test of TestSwarmNodeTaskListFilter in 25029.
Basically this fix adds a check to wait until 3 containers has already up,
before processing `node tasks ...`.
This might fix 25029.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Remove the swarm inspect command and use docker info instead to display
swarm information if the current node is a manager.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Implement the proposal from
https://github.com/docker/docker/issues/24430#issuecomment-233100121
Removes acceptance policy and secret in favor of an automatically
generated join token that combines the secret, CA hash, and
manager/worker role into a single opaque string.
Adds a docker swarm join-token subcommand to inspect and rotate the
tokens.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This fix is an extension to last commit to expand the partial
filter to node and task searches.
Additional integration tests have been added to cover the changes.
This fix fixes 24270.
This fix fixes 24112.
Note: A separate pull request will be opened on swarmkit.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the issue raised in 24270 where it was
not possible to have a partial name match when list services
with name filter.
This fix updates swarmkit and allows prefix search when name is
provided as the filter for listing services.
An additional integration test is added to cover the changes.
This fix fixes 24270.
Note: A separate pull request will be opened on swarmkit.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
The current behavior of `docker swarm init` is to set up a swarm that
has no secret for joining, and does not require manual acceptance for
workers. Since workers may sometimes receive sensitive data such as pull
credentials, it makes sense to harden the defaults.
This change makes `docker swarm init` generate a random secret if none
is provided, and print it to the terminal. This secret will be needed to
join workers or managers to the swarm. In addition to improving access
control to the cluster, this setup removes an avenue for
denial-of-service attacks, since the secret is necessary to even create
an entry in the node list.
`docker swarm init --secret ""` will set up a swarm without a secret,
matching the old behavior. `docker swarm update --secret ""` removes the
automatically generated secret after `docker swarm init`.
Closes#23785
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This fix tries to address an issue raised in #24090 where
the title field of `docker node ls` use NAME instead of
HOSTNAME. Yet the content of this field is actually
hostname.
The fix makes needed changes for the output of
`docker node ls`.
An additional test has been added to cover the change in
this fix.
This fix fixes#24090.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
