Movified from 686be57d0a, and re-ran
gofmt again to address for files not present in 20.10 and vice-versa.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 686be57d0a)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Needed for runc >= 1.0.0-rc94.
See runc issue 2928.
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 9303376242)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Commit 12c7541f1f updated the
opencontainers/selinux dependency to v1.3.1, which had a breaking
change in the errors that were returned.
Before v1.3.1, the "raw" `syscall.ENOTSUP` was returned if the
underlying filesystem did not support xattrs, but later versions
wrapped the error, which caused our detection to fail.
This patch uses `errors.Is()` to check for the underlying error.
This requires github.com/pkg/errors v0.9.1 or above (older versions
could use `errors.Cause()`, but are not compatible with "native"
wrapping of errors in Go 1.13 and up, and could potentially cause
these errors to not being detected again.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Since we don't need the actual split values, instead of calling
`strings.Split`, which allocates new slices on each call, use
`strings.Index`.
This significantly reduces the allocations required when doing env value
replacements.
Additionally, pre-allocate the env var slice, even if we allocate a
little more than we need, it keeps us from having to do multiple
allocations while appending.
```
benchmark old ns/op new ns/op delta
BenchmarkReplaceOrAppendEnvValues/0-8 486 313 -35.60%
BenchmarkReplaceOrAppendEnvValues/100-8 10553 1535 -85.45%
BenchmarkReplaceOrAppendEnvValues/1000-8 94275 12758 -86.47%
BenchmarkReplaceOrAppendEnvValues/10000-8 1161268 129269 -88.87%
benchmark old allocs new allocs delta
BenchmarkReplaceOrAppendEnvValues/0-8 5 2 -60.00%
BenchmarkReplaceOrAppendEnvValues/100-8 110 0 -100.00%
BenchmarkReplaceOrAppendEnvValues/1000-8 1013 0 -100.00%
BenchmarkReplaceOrAppendEnvValues/10000-8 10022 0 -100.00%
benchmark old bytes new bytes delta
BenchmarkReplaceOrAppendEnvValues/0-8 192 24 -87.50%
BenchmarkReplaceOrAppendEnvValues/100-8 7360 0 -100.00%
BenchmarkReplaceOrAppendEnvValues/1000-8 64832 0 -100.00%
BenchmarkReplaceOrAppendEnvValues/10000-8 1146049 0 -100.00%
```
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Switch to moby/sys/mount and mountinfo. Keep the pkg/mount for potential
outside users.
This commit was generated by the following bash script:
```
set -e -u -o pipefail
for file in $(git grep -l 'docker/docker/pkg/mount"' | grep -v ^pkg/mount); do
sed -i -e 's#/docker/docker/pkg/mount"#/moby/sys/mount"#' \
-e 's#mount\.\(GetMounts\|Mounted\|Info\|[A-Za-z]*Filter\)#mountinfo.\1#g' \
$file
goimports -w $file
done
```
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Configuration over the API per container is intentionally left out for
the time being, but is supported to configure the default from the
daemon config.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit cbecf48bc352e680a5390a7ca9cff53098cd16d7)
Signed-off-by: Madhu Venugopal <madhu@docker.com>
This supplements any log driver which does not support reads with a
custom read implementation that uses a local file cache.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit d675e2bf2b75865915c7a4552e00802feeb0847f)
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Format the source according to latest goimports.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This made my IDE unhappy; `ConfigFilePath` is an exported function, so
it makes sense to use the same signature for both Linux and Windows.
This patch also adds error handling (same as on Linux), even though the
current implementation will never return an error (it's good practice
to handle errors, so I assumed this would be the right approach)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
also renamed the non-windows variant of this file to be
consistent with other files in this package
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
When cleaning up IPC mounts, the daemon could log a warning if the IPC mount was not found;
```
cleanup: failed to unmount IPC: umount /var/lib/docker/containers/90f408e26e205d30676655a08504dddc0d17f5713c1dd4654cf67ded7d3bbb63/mounts/shm, flags: 0x2: no such file or directory"
```
These warnings are safe to ignore, but can cause some confusion; `container.UnmountIpcMount()`
already attempted to suppress these warnings, however, `mount.Unmount()` returns a `mountError`,
which nests the original error, therefore detecting failed.
This parch uses `errors.Cause()` to get the _underlying_ error to detect if it's a "is not exist".
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This is the second part to
https://github.com/containerd/containerd/pull/3361 and will help process
delete not block forever when the process exists but the I/O was
inherited by a subprocess that lives on.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
pborman/uuid and google/uuid used to be different versions of
the same package, but now pborman/uuid is a compatibility wrapper
around google/uuid, maintained by the same person.
Clean up some of the usage as the functions differ slightly.
Not yet removed some uses of pborman/uuid in vendored code but
I have PRs in process for these.
Signed-off-by: Justin Cormack <justin.cormack@docker.com>
`time.After` keeps a timer running until the specified duration is
completed. It also allocates a new timer on each call. This can wind up
leaving lots of uneccessary timers running in the background that are
not needed and consume resources.
Instead of `time.After`, use `time.NewTimer` so the timer can actually
be stopped.
In some of these cases it's not a big deal since the duraiton is really
short, but in others it is much worse.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This import got lost after commit 56cc56b0fa
was merged, likely because the PR was built against an outdated
master.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The errors returned from Mount and Unmount functions are raw
syscall.Errno errors (like EPERM or EINVAL), which provides
no context about what has happened and why.
Similar to os.PathError type, introduce mount.Error type
with some context. The error messages will now look like this:
> mount /tmp/mount-tests/source:/tmp/mount-tests/target, flags: 0x1001: operation not permitted
or
> mount tmpfs:/tmp/mount-test-source-516297835: operation not permitted
Before this patch, it was just
> operation not permitted
[v2: add Cause()]
[v3: rename MountError to Error, document Cause()]
[v4: fixes; audited all users]
[v5: make Error type private; changes after @cpuguy83 reviews]
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
As standard mount.Unmount does what we need, let's use it.
In addition, this adds ignoring "not mounted" condition, which
was previously implemented (see PR#33329, commit cfa2591d3f)
via a very expensive call to mount.Mounted().
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This allows non-recursive bind-mount, i.e. mount(2) with "bind" rather than "rbind".
Swarm-mode will be supported in a separate PR because of mutual vendoring.
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
This driver uses protobuf to store log messages and has better defaults
for log file handling (e.g. compression and file rotation enabled by
default).
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This implements chown support on Windows. Built-in accounts as well
as accounts included in the SAM database of the container are supported.
NOTE: IDPair is now named Identity and IDMappings is now named
IdentityMapping.
The following are valid examples:
ADD --chown=Guest . <some directory>
COPY --chown=Administrator . <some directory>
COPY --chown=Guests . <some directory>
COPY --chown=ContainerUser . <some directory>
On Windows an owner is only granted the permission to read the security
descriptor and read/write the discretionary access control list. This
fix also grants read/write and execute permissions to the owner.
Signed-off-by: Salahuddin Khan <salah@docker.com>
With a full attach, each attach was leaking 4 goroutines.
This updates attach to use errgroup instead of the hodge-podge of
waitgroups and channels.
In addition, the detach event was never being sent.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
