The 403 error might not only be raised in swarm operations. It is
also returned when the given container is already connected to the
network and is currently running. I noticed this when during the
following PR: https://github.com/containers/podman/pull/20365
Signed-off-by: Philipp Fruck <dev@p-fruck.de>
Having a sandbox/container-wide MacAddress field makes little sense
since a container can be connected to multiple networks at the same
time. This field is an artefact of old times where a container could be
connected to a single network only.
As we now have a way to specify per-endpoint mac address, this field is
now deprecated.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Prior to this commit, only container.Config had a MacAddress field and
it's used only for the first network the container connects to. It's a
relic of old times where custom networks were not supported.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
So far, only a subset of NetworkingConfig was validated when calling
ContainerCreate. Other parameters would be validated when the container
was started. And the same goes for EndpointSettings on NetworkConnect.
This commit adds two validation steps:
1. Check if the IP addresses set in endpoint's IPAMConfig are valid,
when ContainerCreate and ConnectToNetwork is called ;
2. Check if the network allows static IP addresses, only on
ConnectToNetwork as we need the libnetwork's Network for that and it
might not exist until NetworkAttachment requests are sent to the
Swarm leader (which happens only when starting the container) ;
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
The API endpoint `/containers/create` accepts several EndpointsConfig
since v1.22 but the daemon would error out in such case. This check is
moved from the daemon to the api and is now applied only for API < 1.44,
effectively allowing the daemon to create containers connected to
several networks.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
Fixes#18864, #20648, #33561, #40901.
[This GH comment][1] makes clear network name uniqueness has never been
enforced due to the eventually consistent nature of Classic Swarm
datastores:
> there is no guaranteed way to check for duplicates across a cluster of
> docker hosts.
And this is further confirmed by other comments made by @mrjana in that
same issue, eg. [this one][2]:
> we want to adopt a schema which can pave the way in the future for a
> completely decentralized cluster of docker hosts (if scalability is
> needed).
This decentralized model is what Classic Swarm was trying to be. It's
been superseded since then by Docker Swarm, which has a centralized
control plane.
To circumvent this drawback, the `NetworkCreate` endpoint accepts a
`CheckDuplicate` flag. However it's not perfectly reliable as it won't
catch concurrent requests.
Due to this design decision, API clients like Compose have to implement
workarounds to make sure names are really unique (eg.
docker/compose#9585). And the daemon itself has seen a string of issues
due to that decision, including some that aren't fixed to this day (for
instance moby/moby#40901):
> The problem is, that if you specify a network for a container using
> the ID, it will add that network to the container but it will then
> change it to reference the network by using the name.
To summarize, this "feature" is broken, has no practical use and is a
source of pain for Docker users and API consumers. So let's just remove
it for _all_ API versions.
[1]: https://github.com/moby/moby/issues/18864#issuecomment-167201414
[2]: https://github.com/moby/moby/issues/18864#issuecomment-167202589
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
Updated the description to clarify that this is the endpoint to use if
you want to pull an image.
Signed-off-by: David Karlsson <35727626+dvdksn@users.noreply.github.com>
Currently, IPAM config is never validated by the API. Some checks
are done by the CLI, but they're not exhaustive. And some of these
misconfigurations might be caught early by libnetwork (ie. when the
network is created), and others only surface when connecting a container
to a misconfigured network. In both cases, the API would return a 500.
Although the `NetworkCreate` endpoint might already return warnings,
these are never displayed by the CLI. As such, it was decided during a
maintainer's call to return validation errors _for all API versions_.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The is-automated field is being deprecated by Docker Hub's search API,
and will always be set to "false" in future.
This patch deprecates the field and related filter for the Engine's API.
In future, the `is-automated` filter will no longer yield any results
when searching for `is-automated=true`, and will be ignored when
searching for `is-automated=false`.
Given that this field is deprecated by an external API, the deprecation
will not be versioned, and will apply to any API version.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
With this change, the API will now return a 403 instead of a 500 when
trying to create an overlay network on a non-manager node.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
This adds an additional interval to be used by healthchecks during the
start period.
Typically when a container is just starting you want to check if it is
ready more quickly than a typical healthcheck might run. Without this
users have to balance between running healthchecks to frequently vs
taking a very long time to mark a container as healthy for the first
time.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This field's documentation was still referring to the Swarm V1 API, which
is deprecated, and the link redirects to SwarmKit.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `ClusterStore` and `ClusterAdvertise` fields were deprecated in commit
616e64b42f (and would no longer be included in
the `/info` API response), and were fully removed in 24.0.0 through commit
68bf777ece
This patch removes the fields from the swagger file.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
`docker run -v /foo:/foo:ro` is now recursively read-only on kernel >= 5.12.
Automatically falls back to the legacy non-recursively read-only mount mode on kernel < 5.12.
Use `ro-non-recursive` to disable RRO.
Use `ro-force-recursive` or `rro` to explicitly enable RRO. (Fails on kernel < 5.12)
Fix issue 44978
Fix docker/for-linux issue 788
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
This field is deprecated since 1261fe69a3,
and will now be omitted on API v1.44 and up for the `GET /images/json`,
`GET /images/{id}/json`, and `GET /system/df` endpoints.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The 24.0 branch was created, so changes in master/main should now be
targeting the next version of the API (1.44).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- forward-port changes from 0ffaa6c785 to api/swagger.yaml (v1.44-dev)
- backports the changes to v1.43;
- Update container OOMKilled flag immediately 57d2d6ef62
- Add no-new-privileges to SecurityOptions returned by /info eb7738221c
- API: deprecate VirtualSize field for /images/json and /images/{id}/json 1261fe69a3
- api/types/container: create type for changes endpoint dbb48e4b29
- builder-next/prune: Handle "until" filter timestamps 54a125f677
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Fixes `docker system prune --filter until=<timestamp>`.
`docker system prune` claims to support "until" filter for timestamps,
but it doesn't work because builder "until" filter only supports
duration.
Use the same filter parsing logic and then convert the timestamp to a
relative "keep-duration" supported by buildkit.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
In versions of Docker before v1.10, this field was calculated from
the image itself and all of its parent images. Images are now stored
self-contained, and no longer use a parent-chain, making this field
an equivalent of the Size field.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This adds a new filter argument to the volume prune endpoint "all".
When this is not set, or it is a false-y value, then only anonymous
volumes are considered for pruning.
When `all` is set to a truth-y value, you get the old behavior.
This is an API change, but I think one that is what most people would
want.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The OOMKilled flag on a container's state has historically behaved
rather unintuitively: it is updated on container exit to reflect whether
or not any process within the container has been OOM-killed during the
preceding run of the container. The OOMKilled flag would be set to true
when the container exits if any process within the container---including
execs---was OOM-killed at any time while the container was running,
whether or not the OOM-kill was the cause of the container exiting. The
flag is "sticky," persisting through the next start of the container;
only being cleared once the container exits without any processes having
been OOM-killed that run.
Alter the behavior of the OOMKilled flag such that it signals whether
any process in the container had been OOM-killed since the most recent
start of the container. Set the flag immediately upon any process being
OOM-killed, and clear it when the container transitions to the "running"
state.
There is an ulterior motive for this change. It reduces the amount of
state the libcontainerd client needs to keep track of and clean up on
container exit. It's one less place the client could leak memory if a
container was to be deleted without going through libcontainerd.
Signed-off-by: Cory Snider <csnider@mirantis.com>
full diff: 6068d1894d...48dd89375d
Finishes off the work to change references to cluster volumes in the API
from using "csi" as the magic word to "cluster". This reflects that the
volumes are "cluster volumes", not "csi volumes".
Notably, there is no change to the plugin definitions being "csinode"
and "csicontroller". This terminology is appropriate with regards to
plugins because it accurates reflects what the plugin is.
Signed-off-by: Drew Erny <derny@mirantis.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This has been around for a long time - since v17.04 (API v1.28)
but was never documented.
It allows removing a plugin even if it's still in use.
Signed-off-by: Milas Bowman <milas.bowman@docker.com>
Commit 7a9cb29fb9 added a new "platform" query-
parameter to the `POST /containers/create` endpoint, but did not update the
swagger file and documentation.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The 22.06 branch was created, so changes in master/main should now be
targeting the next version of the API (1.43).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Now client have the possibility to set the console size of the executed
process immediately at the creation. This makes a difference for example
when executing commands that output some kind of text user interface
which is bounded by the console dimensions.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
