Previously, getWalkRoot("/", "foo") would return "//foo"
Now it returns "/foo"
Signed-off-by: Tibor Vass <tibor@docker.com>
(cherry picked from commit 7410f1a859)
Signed-off-by: Tibor Vass <tibor@docker.com>
As reported in docker/for-linux/issues/484, since Docker 18.06
docker cp with a destination file name fails with the following error:
> archive/tar: cannot encode header: Format specifies USTAR; and USTAR cannot encode Name="a_very_xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx_long_filename_that_is_101_characters"
The problem is caused by changes in Go 1.10 archive/tar, which
mis-guesses the tar stream format as USTAR (rather than PAX),
which, in turn, leads to inability to specify file names
longer than 100 characters.
This tar stream is sent by TarWithOptions() (which, since we switched to
Go 1.10, explicitly sets format=PAX for every file, see FileInfoHeader(),
and before Go 1.10 it was PAX by default). Unfortunately, the receiving
side, RebaseArchiveEntries(), which calls tar.Next(), mistakenly guesses
header format as USTAR, which leads to the above error.
The fix is easy: set the format to PAX in RebaseArchiveEntries()
where we read the tar stream and change the file name.
A unit test is added to prevent future regressions.
NOTE this code is not used by dockerd, but rather but docker cli
(also possibly other clients), so this needs to be re-vendored
to cli in order to take effect.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Ubuntu kernel supports overlayfs in user namespaces.
However, Docker had previously crafting overlay opaques directly
using mknod(2) and setxattr(2), which are not supported in userns.
Tested with LXD, Ubuntu 18.04, kernel 4.15.0-36-generic #39-Ubuntu.
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: John Howard <jhoward@microsoft.com>
If fixes an error in sameFsTime which was using `==` to compare two times. The correct way is to use go's built-in timea.Equals(timeb).
In changes_windows, it uses sameFsTime to compare mTim of a `system.StatT` to allow TestChangesDirsMutated to operate correctly now.
Note there is slight different between the Linux and Windows implementations of detecting changes. Due to https://github.com/moby/moby/issues/9874,
and the fix at https://github.com/moby/moby/pull/11422, Linux does not consider a change to the directory time as a change. Windows on NTFS
does. See https://github.com/moby/moby/pull/37982 for more information. The result in `TestChangesDirsMutated`, `dir3` is NOT considered a change
in Linux, but IS considered a change on Windows. The test mutates dir3 to have a mtime of +1 second.
With a handful of tests still outstanding, this change ports most of the unit tests under pkg/archive to Windows.
It provides an implementation of `copyDir` in tests for Windows. To make a copy similar to Linux's `cp -a` while preserving timestamps
and links to both valid and invalid targets, xcopy isn't sufficient. So I used robocopy, but had to circumvent certain exit codes that
robocopy exits with which are warnings. Link to article describing this is in the code.
This implements chown support on Windows. Built-in accounts as well
as accounts included in the SAM database of the container are supported.
NOTE: IDPair is now named Identity and IDMappings is now named
IdentityMapping.
The following are valid examples:
ADD --chown=Guest . <some directory>
COPY --chown=Administrator . <some directory>
COPY --chown=Guests . <some directory>
COPY --chown=ContainerUser . <some directory>
On Windows an owner is only granted the permission to read the security
descriptor and read/write the discretionary access control list. This
fix also grants read/write and execute permissions to the owner.
Signed-off-by: Salahuddin Khan <salah@docker.com>
Prevent changing the tar output by setting the format to
PAX and keeping the times truncated.
Without this change the archiver will produce different tar
archives with different hashes with go 1.10.
The addition of the access and changetime timestamps would
also cause diff comparisons to fail.
Signed-off-by: Derek McGowan <derek@mcgstyle.net>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The Golang built-in gzip library is serialized, and fairly slow
at decompressing. It also only decompresses on demand, versus
pipelining decompression.
This change switches to using the pigz external command
for gzip decompression, as opposed to using the built-in
golang one. This code is not vendored, but will be used
if it autodetected as part of the OS.
This also switches to using context, versus a manually
managed channel to manage cancellations, and synchronization.
There is a little bit of weirdness around manually having
to cancel in the error cases.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Files that are suffixed with `_linux.go` or `_windows.go` are
already only built on Linux / Windows, so these build-tags
were redundant.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Update golang.org/x/sys to 8dbc5d05d6edcc104950cc299a1ce6641235bc86 in
order to get the Major, Minor and Mkdev functions for every unix-like
OS. Use them instead of the locally defined versions which currently use
the Linux specific device major/minor encoding.
This means that the device number should now be properly encoded on e.g.
Darwin, FreeBSD or Solaris.
Also, the SIGUNUSED constant was removed from golang.org/x/sys/unix in
https://go-review.googlesource.com/61771 as it is also removed from the
respective glibc headers.
Remove it from signal.SignalMap as well after the golang.org/x/sys
re-vendoring.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
The promise package represents a simple enough concurrency pattern that
replicating it in place is sufficient. To end the propagation of this
package, it has been removed and the uses have been inlined.
While this code could likely be refactored to be simpler without the
package, the changes have been minimized to reduce the possibility of
defects. Someone else may want to do further refactoring to remove
closures and reduce the number of goroutines in use.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This enables docker cp and ADD/COPY docker build support for LCOW.
Originally, the graphdriver.Get() interface returned a local path
to the container root filesystem. This does not work for LCOW, so
the Get() method now returns an interface that LCOW implements to
support copying to and from the container.
Signed-off-by: Akash Gupta <akagup@microsoft.com>
Signed-off-by: Douglas Curtis <dougcurtis1@gmail.com>
Commenting out tests for now
Signed-off-by: Doug Curtis <dougcurtis1@gmail.com>
Added unit test for CopyInfoDestionationPath.
Signed-off-by: Doug Curtis <dougcurtis1@gmail.com>
Removing integration-cli test case additions
Signed-off-by: Doug Curtis <dougcurtis1@gmail.com>
Removing extra spaces between archive_unix_test.go test cases
Signed-off-by: Doug Curtis <dougcurtis1@gmail.com>
Fixed gofmt issues in archive_unix_test.go
Signed-off-by: Doug Curtis <dougcurtis1@gmail.com>
With docker-17.06.0 some images pulled do not extract properly. Some files don't appear in correct directories. This may or may not cause the pull to fail. These images can't be pushed or saved. 17.06 is the first version of Docker built with go1.8.
Cause
There are multiple updates to the tar package in go1.8.
https://go-review.googlesource.com/c/32234/ disables using "prefix" field when new tar archives are being written. Prefix field was previously set when a record in the archive used a path longer than 100 bytes.
Another change https://go-review.googlesource.com/c/31444/ makes the reader ignore the "prefix" field value if the record is in GNU format. GNU format defines that same area should be used for access and modified times. If the "prefix" field is not read, a file will only be extracted by the basename.
The problem is that with a previous version of the golang archive package headers could be written, that use the prefix field while at the same time setting the header format to GNU. This happens when numeric fields are big enough that they can not be written as octal strings and need to be written in binary. Usually, this shouldn't happen: uid, gid, devmajor, devminor can use up to 7 bytes, size and timestamp can use 11. If one of the records does overflow it switches the whole writer to GNU mode and all next files will be saved in GNU format.
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
Changes most references of syscall to golang.org/x/sys/
Ones aren't changes include, Errno, Signal and SysProcAttr
as they haven't been implemented in /x/sys/.
Signed-off-by: Christopher Jones <tophj@linux.vnet.ibm.com>
[s390x] switch utsname from unsigned to signed
per 33267e036f
char in s390x in the /x/sys/unix package is now signed, so
change the buildtags
Signed-off-by: Christopher Jones <tophj@linux.vnet.ibm.com>
docker run --name=test ubuntu /bin/sh -c "cd /tmp && echo hi > a && ln a b" && docker cp test:/tmp tmp_
test
link /root/tmp/a /root/tmp_/b: no such file or directory
Signed-off-by: yangshukui <yangshukui@huawei.com>
Go 1.9 (golang/go@66b5a2f) removed file type bits from
archive/tar.FileInfoHeader().
This commit ensures file type bits are filled even on Go 1.9 for
compatibility.
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
