Rootlesskit doesn't currently handle IPv6 addresses, causing TestNetworkLoopbackNat
and TestNetworkNat to fail;
Error starting userland proxy:
error while calling PortManager.AddPort(): listen tcp: address :::8080: too many colons in address
This patch:
- Updates `getExternalAddress()` to pick IPv4 address if both IPv6 and IPv4 are found
- Update TestNetworkNat to net.JoinHostPort(), so that square brackets are used for
IPv6 addresses (e.g. `[::]:8080`)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit f845b98ca6)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This fixes a panic when an admin specifies a custom default runtime,
when a plugin is started the shim config is nil.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit 2903863a1d)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Fix docker0 subnet missmatch when running from docker in docker (dind)
Signed-off-by: Alexis Ries <ries.alexis@gmail.com>
(cherry picked from commit 96e103feb1)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Check if the `docker build` completed successfully before continuing.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit fa480403c7)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This currently doesn't make a difference, because load.FrozenImagesLinux()
currently loads all frozen images, not just the specified one, but in case
that is fixed/implemented at some point.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 26965fbfa0)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Commit f2f5106c92 added this test to verify loading
of images that were built with user-namespaces enabled.
However, because this test spins up a new daemon, not the daemon that's set up by
the test-suite's `TestMain()` (which loads the frozen images).
As a result, the `debian:bullseye` image was pulled from Docker Hub when running
the test;
Calling POST /v1.41/images/load?quiet=1
Applying tar in /go/src/github.com/docker/docker/bundles/test-integration/TestBuildUserNamespaceValidateCapabilitiesAreV2/d4d366b15997b/root/165536.165536/overlay2/3f7f9375197667acaf7bc810b34689c21f8fed9c52c6765c032497092ca023d6/diff" storage-driver=overlay
Applied tar sha256:845f0e5159140e9dbcad00c0326c2a506fbe375aa1c229c43f082867d283149c to 3f7f9375197667acaf7bc810b34689c21f8fed9c52c6765c032497092ca023d6, size: 5922359
Calling POST /v1.41/build?buildargs=null&cachefrom=null&cgroupparent=&cpuperiod=0&cpuquota=0&cpusetcpus=&cpusetmems=&cpushares=0&dockerfile=&labels=null&memory=0&memswap=0&networkmode=&rm=0&shmsize=0&t=capabilities%3A1.0&target=&ulimits=null&version=
Trying to pull debian from https://registry-1.docker.io v2
Fetching manifest from remote" digest="sha256:f169dbadc9021fc0b08e371d50a772809286a167f62a8b6ae86e4745878d283d" error="<nil>" remote="docker.io/library/debian:bullseye
Pulling ref from V2 registry: debian:bullseye
...
This patch updates `TestBuildUserNamespaceValidateCapabilitiesAreV2` to load the
frozen image. `StartWithBusybox` is also changed to `Start`, because the test
is not using the busybox image, so there's no need to load it.
In a followup, we should probably add some utilities to make this easier to set up
(and to allow passing the list frozen images that we want to load, without having
to "hard-code" the image name to load).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 46dfc31342)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Using `d.Kill()` with rootless mode causes the restarted daemon to not
be able to start containerd (it times out).
Originally this was SIGKILLing the daemon because we were hoping to not
have to manipulate on disk state, but since we need to anyway we can
shut it down normally.
I also tested this to ensure the test fails correctly without the fix
that the test was added to check for.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit e6591a9c7a)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Adds a test case for the case where dockerd gets stuck on startup due to
hanging `daemon.shutdownContainer`
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Capabilities are serialised in VFS_CAP_REVISION_3 when an image is
built in a user-namespaced daemon, instead of VFS_CAP_REVISION_2.
This adds a test for this, though it's currently wired to fail if
the capabilities are serialised in VFS_CAP_REVISION_2 instead in this
situation, since this is unexpected.
Signed-off-by: Eric Mountain <eric.mountain@datadoghq.com>
This adds a regression test for https://github.com/moby/moby/issues/24595
make DOCKER_GRAPHDRIVER=vfs TEST_FILTER='TestNetworkList' test-integration
INFO: Testing against a local daemon
=== RUN TestNetworkList
=== RUN TestNetworkList//networks
=== PAUSE TestNetworkList//networks
=== RUN TestNetworkList//networks/
=== PAUSE TestNetworkList//networks/
=== CONT TestNetworkList//networks
=== CONT TestNetworkList//networks/
--- PASS: TestNetworkList (0.05s)
--- PASS: TestNetworkList//networks/ (0.01s)
--- PASS: TestNetworkList//networks (0.01s)
PASS
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This fixes a regression based on expectations of the runtime:
```
docker pull arm32v7/alpine
docker run arm32v7/alpine
```
Without this change, the `docker run` will fail due to platform
matching on non-arm32v7 systems, even though the image could run
(assuming the system is setup correctly).
This also emits a warning to make sure that the user is aware that a
platform that does not match the default platform of the system is being
run, for the cases like:
```
docker pull --platform armhf busybox
docker run busybox
```
Not typically an issue if the requests are done together like that, but
if the image was already there and someone did `docker run` without an
explicit `--platform`, they may very well be expecting to run a native
version of the image instead of the armhf one.
This warning does add some extra noise in the case of platform specific
images being run, such as `arm32v7/alpine`, but this can be supressed by
explicitly setting the platform.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
After dicussing with maintainers, it was decided putting the burden of
providing the full cap list on the client is not a good design.
Instead we decided to follow along with the container API and use cap
add/drop.
This brings in the changes already merged into swarmkit.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
In order to run tests at mips64el device.
Now official-images has supported the following images for mips64el.
buildpack-deps:stretch
buildpack-deps:buster
debian:stretch
debian:buster
But official-images does not support the following images for mips64el.
debian:jessie
buildpack-deps:jessie
Signed-off-by: wanghuaiqing <wanghuaiqing@loongson.cn>
If the container specified in `--volumes-from` did not exist, the
API returned a 404 status, which was interpreted by the CLI as the
specified _image_ to be missing (even if that was not the case).
This patch changes these error to return a 400 (bad request);
Before this change:
# make sure the image is present
docker pull busybox
docker create --volumes-from=nosuchcontainer busybox
# Unable to find image 'busybox:latest' locally
# latest: Pulling from library/busybox
# Digest: sha256:95cf004f559831017cdf4628aaf1bb30133677be8702a8c5f2994629f637a209
# Status: Image is up to date for busybox:latest
# Error response from daemon: No such container: nosuchcontainer
After this change:
# make sure the image is present
docker pull busybox
docker create --volumes-from=nosuchcontainer busybox
# Error response from daemon: No such container: nosuchcontainer
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Usage: DOCKER_BUILD_ARGS="--build-arg CONTAINERD_COMMIT=master --build-arg RUNC_COMMIT=master" DOCKER_EXPERIMENTAL=1 TEST_SKIP_INTEGRATION_CLI=1 make test-integration
Depends on containerd master (v1.4) and runc master (v1.0.0-rc91).
Currently `TEST_SKIP_INTEGRATION_CLI=1` must be specified.
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
The initial implementation followed the Swarm API, where
PidsLimit is located in ContainerSpec. This is not the
desired place for this property, so moving the field to
TaskTemplate.Resources in our API.
A similar change should be made in the SwarmKit API (likely
keeping the old field for backward compatibility, because
it was merged some releases back)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The test case panics like that:
> build_test.go:381: assertion failed: 3 (int) != 1 (int)
> panic: runtime error: index out of range [2] with length 1 [recovered]
> panic: runtime error: index out of range [2] with length 1
The fix is trivial.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Support for PidsLimit was added to SwarmKit in docker/swarmkit/pull/2415,
but never exposed through the Docker remove API.
This patch exposes the feature in the repote API.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
