libnetwork/etchosts/etchosts_test.go:167:54: empty-lines: extra empty line at the end of a block (revive)
libnetwork/osl/route_linux.go:185:74: empty-lines: extra empty line at the start of a block (revive)
libnetwork/osl/sandbox_linux_test.go:323:36: empty-lines: extra empty line at the start of a block (revive)
libnetwork/bitseq/sequence.go:412:48: empty-lines: extra empty line at the start of a block (revive)
libnetwork/datastore/datastore_test.go:67:46: empty-lines: extra empty line at the end of a block (revive)
libnetwork/datastore/mock_store.go:34:60: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/firewalld.go:202:44: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/firewalld_test.go:76:36: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/iptables.go:256:67: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/iptables.go:303:128: empty-lines: extra empty line at the start of a block (revive)
libnetwork/networkdb/cluster.go:183:72: empty-lines: extra empty line at the end of a block (revive)
libnetwork/ipams/null/null_test.go:44:38: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/macvlan/macvlan_store.go:45:52: empty-lines: extra empty line at the end of a block (revive)
libnetwork/ipam/allocator_test.go:1058:39: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/bridge/port_mapping.go:88:111: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/bridge/link.go:26:90: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/bridge/setup_ipv6_test.go:17:34: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/bridge/setup_ip_tables.go:392:4: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/bridge/bridge.go:804:50: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/ov_serf.go:183:29: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/ov_utils.go:81:64: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/overlay/peerdb.go:172:67: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/peerdb.go:209:67: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/peerdb.go:344:89: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/peerdb.go:436:63: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/overlay.go:183:36: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/encryption.go:69:28: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/overlay/ov_network.go:563:81: empty-lines: extra empty line at the start of a block (revive)
libnetwork/default_gateway.go:32:43: empty-lines: extra empty line at the start of a block (revive)
libnetwork/errors_test.go:9:40: empty-lines: extra empty line at the start of a block (revive)
libnetwork/service_common.go:184:64: empty-lines: extra empty line at the end of a block (revive)
libnetwork/endpoint.go:161:55: empty-lines: extra empty line at the end of a block (revive)
libnetwork/store.go:320:33: empty-lines: extra empty line at the end of a block (revive)
libnetwork/store_linux_test.go:11:38: empty-lines: extra empty line at the end of a block (revive)
libnetwork/sandbox.go:571:36: empty-lines: extra empty line at the start of a block (revive)
libnetwork/service_common.go:317:246: empty-lines: extra empty line at the start of a block (revive)
libnetwork/endpoint.go:550:17: empty-lines: extra empty line at the end of a block (revive)
libnetwork/sandbox_dns_unix.go:213:106: empty-lines: extra empty line at the start of a block (revive)
libnetwork/controller.go:676:85: empty-lines: extra empty line at the end of a block (revive)
libnetwork/agent.go:876:60: empty-lines: extra empty line at the end of a block (revive)
libnetwork/resolver.go:324:69: empty-lines: extra empty line at the end of a block (revive)
libnetwork/network.go:1153:92: empty-lines: extra empty line at the end of a block (revive)
libnetwork/network.go:1955:67: empty-lines: extra empty line at the start of a block (revive)
libnetwork/network.go:2235:9: empty-lines: extra empty line at the start of a block (revive)
libnetwork/libnetwork_internal_test.go:336:26: empty-lines: extra empty line at the start of a block (revive)
libnetwork/resolver_test.go:76:35: empty-lines: extra empty line at the end of a block (revive)
libnetwork/libnetwork_test.go:303:38: empty-lines: extra empty line at the end of a block (revive)
libnetwork/libnetwork_test.go:985:46: empty-lines: extra empty line at the end of a block (revive)
libnetwork/ipam/allocator_test.go:1263:37: empty-lines: extra empty line at the start of a block (revive)
libnetwork/errors_test.go:9:40: empty-lines: extra empty line at the end of a block (revive)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The linter falsely detects this as using "math/rand":
libnetwork/networkdb/cluster.go:721:14: G404: Use of weak random number generator (math/rand instead of crypto/rand) (gosec)
val, err := rand.Int(rand.Reader, big.NewInt(int64(n)))
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
In network node change test, the expected behavior is focused on how many nodes
left in networkDB, besides timing issues, things would also go tricky for a
leave-then-join sequence, if the check (counting the nodes) happened before the
first "leave" event, then the testcase actually miss its target and report PASS
without verifying its final result; if the check happened after the 'leave' event,
but before the 'join' event, the test would report FAIL unnecessary;
This code change would check both the db changes and the node count, it would
report PASS only when networkdb has indeed changed and the node count is expected.
Signed-off-by: David Wang <00107082@163.com>
Older versions of Go don't format comments, so committing this as
a separate commit, so that we can already make these changes before
we upgrade to Go 1.19.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The io/ioutil package has been deprecated in Go 1.16. This commit
replaces the existing io/ioutil functions with their new definitions in
io and os packages.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Perhaps the testutils package in the past had an `init()` function to set up
specific things, but it no longer has. so these imports were doing nothing.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
`github.com/hashicorp/memberlist` update caused `TestNetworkDBCRUDTableEntries`
to occasionally fail, because the test would try to check whether an entry
write is propagated to all nodes, but it would not wait for all nodes to
be available before performing the write.
It could be that the failure is caused simply by improved performance of
the dependency - it could also be that some connectivity guarantee the
test depended on is not provided by the dependency anymore.
The same fix is applied to `TestNetworkDBNodeJoinLeaveIteration` due to
same issue.
Signed-off-by: Roman Volosatovs <roman.volosatovs@docker.com>
This allows the rejoin intervals to be chosen according to the context
within which the component is used, and, in particular, this allows
lower intervals to be used within TestNetworkDBIslands test.
Signed-off-by: Roman Volosatovs <roman.volosatovs@docker.com>
These were purposefully ignored before but this goes ahead and "fixes"
most of them.
Note that none of the things gosec flagged are problematic, just
quieting the linter here.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
After moving libnetwork to this repo, we need to update all the import
paths for libnetwork to point to docker/docker/libnetwork instead of
docker/libnetwork.
This change implements that.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Fixed these tests :
1.TestNetworkDBIslands
Addresses : https://github.com/docker/libnetwork/issues/2402
2.TestNetworkDBCRUDMediumCluster
Addresses : https://github.com/docker/libnetwork/issues/2401
By :
1. Importing gotest.tools/poll to use poll.WaitOn
Above function can be used to check a condition at regular intervals
until a timeout is reached
2. Replacing Sleep with poll.WaitOn
2. Adding closeNetworkDBInstances to close remaining DBs
Signed-off-by: Arko Dasgupta <arko.dasgupta@docker.com>
It is possible that the node is not yet present in
the node list map. In this case just print a warning
and return. The next iteration would be fine
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
```
make lint
networkdb/networkdb_test.go:88:2: should replace t.Error(fmt.Sprintf(...)) with t.Errorf(...)
networkdb/networkdb_test.go:136:2: should replace t.Error(fmt.Sprintf(...)) with t.Errorf(...)
make: *** [lint] Error 1
```
Signed-off-by: Lei Gong <lgong@alauda.io>
Internal directory is designed to contain libraries
that are exclusively used by this project
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
The previous code used string slices to limit the length of certain
fields like endpoint or sandbox IDs. This assumes that these strings
are at least as long as the slice length. Unfortunately, some sandbox
IDs can be smaller than 7 characters. This fix addresses this issue
by systematically converting format string calls that were taking
fixed-slice arguments to use a precision specifier in the string format
itself. From the golang fmt package documentation:
For strings, byte slices and byte arrays, however, precision limits
the length of the input to be formatted (not the size of the output),
truncating if necessary. Normally it is measured in runes, but for
these types when formatted with the %x or %X format it is measured
in bytes.
This nicely fits the desired behavior: it will limit the number of
runes considered for string interpolation to the precision value.
Signed-off-by: Chris Telfer <ctelfer@docker.com>
Added some optimizations to reduce the messages in the queue:
1) on join network the node execute a tcp sync with all the nodes that
it is aware part of the specific network. During this time before the
node was redistributing all the entries. This meant that if the network
had 10K entries the queue of the joining node will jump to 10K. The fix
adds a flag on the network that would avoid to insert any entry in the
queue till the sync happens. Note that right now the flag is set in
a best effort way, there is no real check if at least one of the nodes
succeed.
2) limit the number of messages to redistribute coming from a TCP sync.
Introduced a threshold that limit the number of messages that are
propagated, this will disable this optimization in case of heavy load.
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
Refactor the ostweaks file to allows a more easy reuse
Add a method on the osl.Sandbox interface to allow setting
knobs on the sandbox
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
agent.pb.go is unchanged, but the files in networkdb and drivers
are slightly different when regenerated using the current versions
of protoc and gogoproto. This is probably because agent.pb.go
was last regenerated quite recently, in February 2018, whereas
networkdb.pb.go and overlay/overlay.pb.go were last changed in 2017,
and windows/overlay/overlay.pb.go was last changed in 2016.
Signed-off-by: Euan Harris <euan.harris@docker.com>
Previous logic was not accounting that each node is
in the node list so the bootstrap nodes won't retry
to reconnect because they will always find themselves
in the node map
Added test that validate the gossip island condition
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
`handleNodeEvent` is calling `changeNodeState` which writes to various
maps on the ndb object.
Using a write lock prevents a panic on concurrent read/write access on
these maps.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Avoid waiting for a double notification once a node rejoin, just
put it back to active state. Waiting for a further message does not
really add anything to the safety of the operation, the source of truth
for the node status resided inside memberlist.
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
Created method to handle the node state change with cleanup operation
associated.
Realign testing client with the new diagnostic interface
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
If a node leave, avoid to notify the upper layer
for entries that are already marked for deletion
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
This commit introduces the possibility to enable a debug mode
for the networkDB, this will allow the opening of a tcp port
on localhost that will expose the networkDB api for debugging
purposes.
The API can be discovered using curl localhost:<port>/help
It support json output if passed json as URL query parameter
option and pretty printing if passing json=pretty
All the binaries values are serialized in base64 encoding, this
can be skip passing the unsafe option as url query parameter
A simple go client will follow up
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
