integration/config/config_test.go:106:31: empty-lines: extra empty line at the end of a block (revive)
integration/secret/secret_test.go:106:31: empty-lines: extra empty line at the end of a block (revive)
integration/network/service_test.go:58:50: empty-lines: extra empty line at the end of a block (revive)
integration/network/service_test.go:401:58: empty-lines: extra empty line at the end of a block (revive)
integration/system/event_test.go:30:38: empty-lines: extra empty line at the end of a block (revive)
integration/plugin/logging/read_test.go:19:41: empty-lines: extra empty line at the end of a block (revive)
integration/service/list_test.go:30:48: empty-lines: extra empty line at the end of a block (revive)
integration/service/create_test.go:400:46: empty-lines: extra empty line at the start of a block (revive)
integration/container/logs_test.go:156:42: empty-lines: extra empty line at the end of a block (revive)
integration/container/daemon_linux_test.go:135:44: empty-lines: extra empty line at the end of a block (revive)
integration/container/restart_test.go:160:62: empty-lines: extra empty line at the end of a block (revive)
integration/container/wait_test.go:181:47: empty-lines: extra empty line at the end of a block (revive)
integration/container/restart_test.go:116:30: empty-lines: extra empty line at the end of a block (revive)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Older versions of Go don't format comments, so committing this as
a separate commit, so that we can already make these changes before
we upgrade to Go 1.19.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Starting with the 22.06 release, buildx is the default client for
docker build, which uses BuildKit as builder.
This patch changes the default builder version as advertised by
the daemon to "2" (BuildKit), so that pre-22.06 CLIs with BuildKit
support (but no buildx installed) also default to using BuildKit
when interacting with a 22.06 (or up) daemon.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
I noticed I made a mistake in the first ping ("before swarm init"), which
was not specifying the daemon's socket path and because of that testing
against the main integration daemon (not the locally spun up daemon).
While fixing that, I wondered why the test didn't actually use the client
for the requests (to also verify the client converted the response), so
I rewrote the test to use `client.Ping()` and to verify the ping response
has the expected values set.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This adds an additional "Swarm" header to the _ping endpoint response,
which allows a client to detect if Swarm is enabled on the daemon, without
having to call additional endpoints.
This change is not versioned in the API, and will be returned irregardless
of the API version that is used. Clients should fall back to using other
endpoints to get this information if the header is not present.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This is more in line with other consts that are used for defaults, and makes it
slightly easier to consume than DefaultV2Registry, e.g. see:
https://github.com/oras-project/oras-go/blob/v1.1.0/pkg/auth/docker/resolver.go#L81-L84
Note that both the "index.docker.io" and "registry-1.docker.io" domains
are here for historic reasons and backward-compatibility. These domains
are still supported by Docker Hub (and will continue to be supported), but
there are new domains already in use, and plans to consolidate all legacy
domains to new "canonical" domains. Once those domains are decided on, we
should update these consts (but making sure to preserve compatibility with
existing installs, clients, and user configuration).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Let clients choose object types to compute disk usage of.
Signed-off-by: Roman Volosatovs <roman.volosatovs@docker.com>
Co-authored-by: Sebastiaan van Stijn <github@gone.nl>
The VolumesService did not have information wether or not a volume
was _created_ or if a volume already existed in the driver, and
the existing volume was used.
As a result, multiple "create" events could be generated for the
same volume. For example:
1. Run `docker events` in a shell to start listening for events
2. Create a volume:
docker volume create myvolume
3. Start a container that uses that volume:
docker run -dit -v myvolume:/foo busybox
4. Check the events that were generated:
2021-02-15T18:49:55.874621004+01:00 volume create myvolume (driver=local)
2021-02-15T18:50:11.442759052+01:00 volume create myvolume (driver=local)
2021-02-15T18:50:11.487104176+01:00 container create 45112157c8b1382626bf5e01ef18445a4c680f3846c5e32d01775dddee8ca6d1 (image=busybox, name=gracious_hypatia)
2021-02-15T18:50:11.519288102+01:00 network connect a19f6bb8d44ff84d478670fa4e34c5bf5305f42786294d3d90e790ac74b6d3e0 (container=45112157c8b1382626bf5e01ef18445a4c680f3846c5e32d01775dddee8ca6d1, name=bridge, type=bridge)
2021-02-15T18:50:11.526407799+01:00 volume mount myvolume (container=45112157c8b1382626bf5e01ef18445a4c680f3846c5e32d01775dddee8ca6d1, destination=/foo, driver=local, propagation=, read/write=true)
2021-02-15T18:50:11.864134043+01:00 container start 45112157c8b1382626bf5e01ef18445a4c680f3846c5e32d01775dddee8ca6d1 (image=busybox, name=gracious_hypatia)
5. Notice that a "volume create" event is created twice;
- once when `docker volume create` was ran
- once when `docker run ...` was ran
This patch moves the generation of (most) events to the volume _store_, and only
generates an event if the volume did not yet exist.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Some tests were using domain names that were intended to be "fake", but are
actually registered domain names (such as domain.com, registry.com, mytest.com).
Even though we were not actually making connections to these domains, it's
better to use domains that are designated for testing/examples in RFC2606:
https://tools.ietf.org/html/rfc2606
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Go 1.14 adds quotes around the url in the error returned:
=== FAIL: arm64.integration.system TestLoginFailsWithBadCredentials (0.27s)
TestLoginFailsWithBadCredentials: login_test.go:27: assertion failed: expected error "Error response from daemon: Get https://registry-1.docker.io/v2/: unauthorized: incorrect username or password", got "Error response from daemon: Get \"https://registry-1.docker.io/v2/\": unauthorized: incorrect username or password"
Error response from daemon: Get "https://registry-1.docker.io/v2/": unauthorized: incorrect username or password
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The tests starts a new daemon, but attempts to run it with overlay2,
and using a unix:// socket, which doesn't really work on Windows.
40155 tried to disable such tests but missed two of them.
They are being disabled with this change.
Signed-off-by: vikrambirsingh <vikrambir.singh@docker.com>
- Updated TestInfoSecurityOptions to not rely on CLI output. Note that this
test should be migrated to the integration suite, but that suite does not yet
have checks for "Seccomp" and "AppArmor"
- TestInfoAPIWarnings: don't start with busybox because we're not running containers in this test
- Migrate TestInfoDebug to integration suite
- Migrate TestInsecureRegistries to integration suite (renamed to TestInfoInsecureRegistries)
- Migrate TestRegistryMirrors to integration suite (renamed to TestInfoRegistryMirrors)
- Migrate TestInfoDiscoveryBackend to integration suite
- Migrate TestInfoDiscoveryInvalidAdvertise to integration suite
- Migrate TestInfoDiscoveryAdvertiseInterfaceName to integration suite
- Remove TestInfoFormat, which is testing the CLI functionality, and there is an
existing test in docker/cli (TestFormatInfo) covering this
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
```
Line 25: warning: context.Context should be the first parameter of a function (golint)
Line 44: warning: context.Context should be the first parameter of a function (golint)
Line 52: warning: context.Context should be the first parameter of a function (golint)
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
pborman/uuid and google/uuid used to be different versions of
the same package, but now pborman/uuid is a compatibility wrapper
around google/uuid, maintained by the same person.
Clean up some of the usage as the functions differ slightly.
Not yet removed some uses of pborman/uuid in vendored code but
I have PRs in process for these.
Signed-off-by: Justin Cormack <justin.cormack@docker.com>
Monitoring systems and load balancers are usually configured to use HEAD
requests for health monitoring. The /_ping endpoint currently does not
support this type of request, which means that those systems have fallback
to GET requests.
This patch adds support for HEAD requests on the /_ping endpoint.
Although optional, this patch also returns `Content-Type` and `Content-Length`
headers in case of a HEAD request; Refering to RFC 7231, section 4.3.2:
The HEAD method is identical to GET except that the server MUST NOT
send a message body in the response (i.e., the response terminates at
the end of the header section). The server SHOULD send the same
header fields in response to a HEAD request as it would have sent if
the request had been a GET, except that the payload header fields
(Section 3.3) MAY be omitted. This method can be used for obtaining
metadata about the selected representation without transferring the
representation data and is often used for testing hypertext links for
validity, accessibility, and recent modification.
A payload within a HEAD request message has no defined semantics;
sending a payload body on a HEAD request might cause some existing
implementations to reject the request.
The response to a HEAD request is cacheable; a cache MAY use it to
satisfy subsequent HEAD requests unless otherwise indicated by the
Cache-Control header field (Section 5.2 of [RFC7234]). A HEAD
response might also have an effect on previously cached responses to
GET; see Section 4.3.5 of [RFC7234].
With this patch applied, either `GET` or `HEAD` requests work; the only
difference is that the body is empty in case of a `HEAD` request;
curl -i --unix-socket /var/run/docker.sock http://localhost/_ping
HTTP/1.1 200 OK
Api-Version: 1.40
Cache-Control: no-cache, no-store, must-revalidate
Docker-Experimental: false
Ostype: linux
Pragma: no-cache
Server: Docker/dev (linux)
Date: Mon, 14 Jan 2019 12:35:16 GMT
Content-Length: 2
Content-Type: text/plain; charset=utf-8
OK
curl --head -i --unix-socket /var/run/docker.sock http://localhost/_ping
HTTP/1.1 200 OK
Api-Version: 1.40
Cache-Control: no-cache, no-store, must-revalidate
Content-Length: 0
Content-Type: text/plain; charset=utf-8
Docker-Experimental: false
Ostype: linux
Pragma: no-cache
Server: Docker/dev (linux)
Date: Mon, 14 Jan 2019 12:34:15 GMT
The client is also updated to use `HEAD` by default, but fallback to `GET`
if the daemon does not support this method.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
A client is already created in testenv.New(), so we can just
as well use that one, instead of creating a new client.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This test starts a new daemon, which will fail when testing
against a remote daemon;
--- FAIL: TestInfoAPIWarnings (0.00s)
info_test.go:53: failed to start daemon with arguments [-H=0.0.0.0:23756 -H=unix:///tmp/docker-integration/d5153ebcf89ef.sock] : [d5153ebcf89ef] could not find docker binary in $PATH: exec: "dockerd": executable file not found in $PATH
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
`d.Sock()` already returns the socket-path including the
`unix://` scheme.
Also removed `--iptables=false`, as it didn't really seem
nescessary for this test.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This check was not important anymore; we're only interested if
the API returns a matching commit for each binary.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- Add windows CI entrypoint script.
Signed-off-by: John Howard <jhoward@microsoft.com>
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Signed-off-by: Daniel Nephin <dnephin@docker.com>
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
The remote API allows full privilege escalation and is equivalent to
having root access on the host. Because of this, the API should never
be accessible through an insecure connection (TCP without TLS, or TCP
without TLS verification).
Although a warning is already logged on startup if the daemon uses an
insecure configuration, this warning is not very visible (unless someone
decides to read the logs).
This patch attempts to make insecure configuration more visible by sending
back warnings through the API (which will be printed when using `docker info`).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
