Simplify the hijack process by just performing the http request/response
on the connection and returning the raw conn after success. The client
conn from httputil is deprecated and easily replaced.
Signed-off-by: Derek McGowan <derek@mcg.dev>
This commit switches our code to use semconv 1.21, which is the version matching
the OTEL modules, as well as the containerd code.
The BuildKit 0.12.x module currently uses an older version of the OTEL modules,
and uses the semconv 0.17 schema. Mixing schema-versions is problematic, but
we still want to consume BuildKit's "detect" package to wire-up other parts
of OTEL.
To align the versions in our code, this patch sets the BuildKit detect.Resource
with the correct semconv version.
It's worth noting that the BuildKit package has a custom "serviceNameDetector";
https://github.com/moby/buildkit/blob/v0.12.4/util/tracing/detect/detect.go#L153-L169
Whith is merged with OTEL's default resource:
https://github.com/moby/buildkit/blob/v0.12.4/util/tracing/detect/detect.go#L100-L107
There's no need to duplicate that code, as OTEL's `resource.Default()` already
provides this functionality:
- It uses fromEnv{} detector internally: https://github.com/open-telemetry/opentelemetry-go/blob/v1.19.0/sdk/resource/resource.go#L208
- fromEnv{} detector reads OTEL_SERVICE_NAME: https://github.com/open-telemetry/opentelemetry-go/blob/v1.19.0/sdk/resource/env.go#L53
This patch also removes uses of the httpconv package, which is no longer included
in semconv 1.21 and now an internal package. Removing the use of this package
means that hijacked connections will not have the HTTP attributes on the Moby
client span, which isn't ideal, but a limited loss that'd impact exec/attach.
The span itself will still exist, it just won't the additional attributes that
are added by that package.
Alternatively, the httpconv call COULD remain - it will not error and will send
syntactically valid spans but we would be mixing & matching semconv versions,
so won't be compliant.
Some parts of the httpconv package were preserved through a very minimal local
implementation; a variant of `httpconv.ClientStatus(resp.StatusCode))` is added
to set the span status (`span.SetStatus()`). The `httpconv` package has complex
logic for this, but mostly drills down to HTTP status range (1xx/2xx/3xx/4xx/5xx)
to determine if the status was successfull or non-successful (4xx/5xx).
The additional logic it provided was to validate actual status-codes, and to
convert "bogus" status codes in "success" ranges (1xx, 2xx) into an error. That
code seemed over-reaching (and not accounting for potential future _valid_
status codes). Let's assume we only get valid status codes.
- https://github.com/open-telemetry/opentelemetry-go/blob/v1.21.0/semconv/v1.17.0/httpconv/http.go#L85-L89
- https://github.com/open-telemetry/opentelemetry-go/blob/v1.21.0/semconv/internal/v2/http.go#L322-L330
- https://github.com/open-telemetry/opentelemetry-go/blob/v1.21.0/semconv/internal/v2/http.go#L356-L404
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The daemon currently provides support for API versions all the way back
to v1.12, which is the version of the API that shipped with docker 1.0. On
Windows, the minimum supported version is v1.24.
Such old versions of the client are rare, and supporting older API versions
has accumulated significant amounts of code to remain backward-compatible
(which is largely untested, and a "best-effort" at most).
This patch updates the minimum API version to v1.24, which is the fallback
API version used when API-version negotiation fails. The intent is to start
deprecating older API versions, but no code is removed yet as part of this
patch, and a DOCKER_MIN_API_VERSION environment variable is added, which
allows overriding the minimum version (to allow restoring the behavior from
before this patch).
With this patch the daemon defaults to API v1.24 as minimum:
docker version
Client:
Version: 24.0.2
API version: 1.43
Go version: go1.20.4
Git commit: cb74dfc
Built: Thu May 25 21:50:49 2023
OS/Arch: linux/arm64
Context: default
Server:
Engine:
Version: dev
API version: 1.44 (minimum version 1.24)
Go version: go1.21.3
Git commit: 0322a29b9ef8806aaa4b45dc9d9a2ebcf0244bf4
Built: Mon Dec 4 15:22:17 2023
OS/Arch: linux/arm64
Experimental: false
containerd:
Version: v1.7.9
GitCommit: 4f03e100cb967922bec7459a78d16ccbac9bb81d
runc:
Version: 1.1.10
GitCommit: v1.1.10-0-g18a0cb0
docker-init:
Version: 0.19.0
GitCommit: de40ad0
Trying to use an older version of the API produces an error:
DOCKER_API_VERSION=1.23 docker version
Client:
Version: 24.0.2
API version: 1.23 (downgraded from 1.43)
Go version: go1.20.4
Git commit: cb74dfc
Built: Thu May 25 21:50:49 2023
OS/Arch: linux/arm64
Context: default
Error response from daemon: client version 1.23 is too old. Minimum supported API version is 1.24, please upgrade your client to a newer version
To restore the previous minimum, users can start the daemon with the
DOCKER_MIN_API_VERSION environment variable set:
DOCKER_MIN_API_VERSION=1.12 dockerd
API 1.12 is the oldest supported API version on Linux;
docker version
Client:
Version: 24.0.2
API version: 1.43
Go version: go1.20.4
Git commit: cb74dfc
Built: Thu May 25 21:50:49 2023
OS/Arch: linux/arm64
Context: default
Server:
Engine:
Version: dev
API version: 1.44 (minimum version 1.12)
Go version: go1.21.3
Git commit: 0322a29b9ef8806aaa4b45dc9d9a2ebcf0244bf4
Built: Mon Dec 4 15:22:17 2023
OS/Arch: linux/arm64
Experimental: false
containerd:
Version: v1.7.9
GitCommit: 4f03e100cb967922bec7459a78d16ccbac9bb81d
runc:
Version: 1.1.10
GitCommit: v1.1.10-0-g18a0cb0
docker-init:
Version: 0.19.0
GitCommit: de40ad0
When using the `DOCKER_MIN_API_VERSION` with a version of the API that
is not supported, an error is produced when starting the daemon;
DOCKER_MIN_API_VERSION=1.11 dockerd --validate
invalid DOCKER_MIN_API_VERSION: minimum supported API version is 1.12: 1.11
DOCKER_MIN_API_VERSION=1.45 dockerd --validate
invalid DOCKER_MIN_API_VERSION: maximum supported API version is 1.44: 1.45
Specifying a malformed API version also produces the same error;
DOCKER_MIN_API_VERSION=hello dockerd --validate
invalid DOCKER_MIN_API_VERSION: minimum supported API version is 1.12: hello
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The example still used the deprecated types.ContainerListOptions;
also slightly updated the example to show both stopped and running
containers, so that the example works even if no container is running.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Having a sandbox/container-wide MacAddress field makes little sense
since a container can be connected to multiple networks at the same
time. This field is an artefact of old times where a container could be
connected to a single network only.
As we now have a way to specify per-endpoint mac address, this field is
now deprecated.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Prior to this commit, only container.Config had a MacAddress field and
it's used only for the first network the container connects to. It's a
relic of old times where custom networks were not supported.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
While updating the docker/docker dependency in BuildKit, I noticed that the
dependency tree showed _two_ separate versions of the semconv package;
BuildKit and containerd were using the v1.17.0 version and docker/docker was
using v1.7.0.
This patch updates the version we use to align with BuildKit and containerd.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
We try to perform API-version negotiation as lazy as possible (and only execute
when we are about to make an API request). However, some code requires API-version
dependent handling (to set options, or remove options based on the version of the
API we're using).
Currently this code depended on the caller code to perform API negotiation (or
to configure the API version) first, which may not happen, and because of that
we may be missing options (or set options that are not supported on older API
versions).
This patch:
- splits the code that triggered API-version negotiation to a separate
Client.checkVersion() function.
- updates NewVersionError to accept a context
- updates NewVersionError to perform API-version negotiation (if enabled)
- updates various Client functions to manually trigger API-version negotiation
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Fixes#18864, #20648, #33561, #40901.
[This GH comment][1] makes clear network name uniqueness has never been
enforced due to the eventually consistent nature of Classic Swarm
datastores:
> there is no guaranteed way to check for duplicates across a cluster of
> docker hosts.
And this is further confirmed by other comments made by @mrjana in that
same issue, eg. [this one][2]:
> we want to adopt a schema which can pave the way in the future for a
> completely decentralized cluster of docker hosts (if scalability is
> needed).
This decentralized model is what Classic Swarm was trying to be. It's
been superseded since then by Docker Swarm, which has a centralized
control plane.
To circumvent this drawback, the `NetworkCreate` endpoint accepts a
`CheckDuplicate` flag. However it's not perfectly reliable as it won't
catch concurrent requests.
Due to this design decision, API clients like Compose have to implement
workarounds to make sure names are really unique (eg.
docker/compose#9585). And the daemon itself has seen a string of issues
due to that decision, including some that aren't fixed to this day (for
instance moby/moby#40901):
> The problem is, that if you specify a network for a container using
> the ID, it will add that network to the container but it will then
> change it to reference the network by using the name.
To summarize, this "feature" is broken, has no practical use and is a
source of pain for Docker users and API consumers. So let's just remove
it for _all_ API versions.
[1]: https://github.com/moby/moby/issues/18864#issuecomment-167201414
[2]: https://github.com/moby/moby/issues/18864#issuecomment-167202589
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
This uses otel standard environment variables to configure tracing in
the daemon.
It also adds support for propagating trace contexts in the client and
reading those from the API server.
See
https://opentelemetry.io/docs/specs/otel/configuration/sdk-environment-variables/
for details on otel environment variables.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
The test considered `Foo/bar` to be an invalid name, with the assumption
that it was `[docker.io]/Foo/bar`. However, this was incorrect, and the
test passed because the reference parsing had a bug; if the first element
(`Foo`) is not lowercase (so not a valid namespace / "path element"), then
it *should* be considered a domain (as uppercase domain names are valid).
The reference parser did not account for this, and running the test with
a version of the parser with a fix caused the test to fail:
=== Failed
=== FAIL: client TestImageTagInvalidSourceImageName/invalidRepo/FOO/bar (0.00s)
image_tag_test.go:54: assertion failed: expected error to contain "not a valid repository/tag", got "Error response from daemon: client should not have made an API call"
Error response from daemon: client should not have made an API call
=== FAIL: client TestImageTagInvalidSourceImageName (0.00s)
This patch removes the faulty test-case.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Define consts for the Actions we use for events, instead of "ad-hoc" strings.
Having these consts makes it easier to find where specific events are triggered,
makes the events less error-prone, and allows documenting each Action (if needed).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This type was added in 247f4796d2, and
at the time was added as an alias for string;
> api/types/events: add "Type" type for event-type enum
>
> Currently just an alias for string, but we can change it to be an
> actual type.
Now that all code uses the defined types, we should be able to make
this an actual type.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This test was testing the client-side validation, so might as well
move it there, and validate that the client invalidates before
trying to make an API call.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Attach the context to the request while we're creating it, instead of
creating the context first, and adding the context later.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Re-use the request, and change the method to GET instead of building
a new request "from scratch".
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This makes it slightly clearer what it does, as "resolve" may give the
impression it's doing more than just returning the TLS config configured
for the client.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
fallbackDial was only used in a single place, and it was defined far away
from where it's used, so let's inline it, so that it's clear at a glance
what we're doing.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- remove some intermediate variables
- explicitly return "nil" if there's no error
- remove redundant check for response-headers being nil
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
tlsconfig.Client() does various things, including reading certs and
checking them. So we may as well return early if we're not gonna be
able to use the config.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- don't use un-keyed structs
- use http consts where possible
- use errors.As instead of manually checking the error-type
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
