The per-network statistics counters are loaded and incremented without
any concurrency control. Use atomic integers to prevent data races
without having to add any synchronization.
Signed-off-by: Cory Snider <csnider@mirantis.com>
(cherry picked from commit d31fa84c7c)
Signed-off-by: Cory Snider <csnider@mirantis.com>
DNS servers in the loopback address range should always be resolved in
the host network namespace when the servers are configured by reading
from the host's /etc/resolv.conf. The daemon mistakenly conflated the
presence of DNS options (docker run --dns-opt) with user-supplied DNS
servers, treating the list of servers loaded from the host as a user-
supplied list and attempting to resolve in the container's network
namespace. Correct this oversight so that loopback DNS servers are only
resolved in the container's network namespace when the user provides the
DNS server list, irrespective of other DNS configuration.
Signed-off-by: Cory Snider <csnider@mirantis.com>
(cherry picked from commit 046cc9e776)
Signed-off-by: Cory Snider <csnider@mirantis.com>
If the resolver encounters an error before it attempts to forward the
request to external DNS, do not try to log information about the
external connection, because at this point `extConn` is `nil`. This
makes sure `dockerd` won't panic and crash from a nil pointer
dereference when it sees an invalid DNS query.
fixes#44979
Signed-off-by: er0k <er0k@er0k.net>
IPVLAN networks created on Moby v20.10 do not have the IpvlanFlag
configuration value persisted in the libnetwork database as that config
value did not exist before v23.0.0. Gracefully migrate configurations on
unmarshal to prevent type-assertion panics at daemon start after upgrade.
Fixes#44925
Signed-off-by: Cory Snider <csnider@mirantis.com>
(cherry picked from commit 91725ddc92)
Signed-off-by: Cory Snider <csnider@mirantis.com>
libnetwork/etchosts/etchosts_test.go:167:54: empty-lines: extra empty line at the end of a block (revive)
libnetwork/osl/route_linux.go:185:74: empty-lines: extra empty line at the start of a block (revive)
libnetwork/osl/sandbox_linux_test.go:323:36: empty-lines: extra empty line at the start of a block (revive)
libnetwork/bitseq/sequence.go:412:48: empty-lines: extra empty line at the start of a block (revive)
libnetwork/datastore/datastore_test.go:67:46: empty-lines: extra empty line at the end of a block (revive)
libnetwork/datastore/mock_store.go:34:60: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/firewalld.go:202:44: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/firewalld_test.go:76:36: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/iptables.go:256:67: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/iptables.go:303:128: empty-lines: extra empty line at the start of a block (revive)
libnetwork/networkdb/cluster.go:183:72: empty-lines: extra empty line at the end of a block (revive)
libnetwork/ipams/null/null_test.go:44:38: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/macvlan/macvlan_store.go:45:52: empty-lines: extra empty line at the end of a block (revive)
libnetwork/ipam/allocator_test.go:1058:39: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/bridge/port_mapping.go:88:111: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/bridge/link.go:26:90: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/bridge/setup_ipv6_test.go:17:34: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/bridge/setup_ip_tables.go:392:4: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/bridge/bridge.go:804:50: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/ov_serf.go:183:29: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/ov_utils.go:81:64: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/overlay/peerdb.go:172:67: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/peerdb.go:209:67: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/peerdb.go:344:89: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/peerdb.go:436:63: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/overlay.go:183:36: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/encryption.go:69:28: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/overlay/ov_network.go:563:81: empty-lines: extra empty line at the start of a block (revive)
libnetwork/default_gateway.go:32:43: empty-lines: extra empty line at the start of a block (revive)
libnetwork/errors_test.go:9:40: empty-lines: extra empty line at the start of a block (revive)
libnetwork/service_common.go:184:64: empty-lines: extra empty line at the end of a block (revive)
libnetwork/endpoint.go:161:55: empty-lines: extra empty line at the end of a block (revive)
libnetwork/store.go:320:33: empty-lines: extra empty line at the end of a block (revive)
libnetwork/store_linux_test.go:11:38: empty-lines: extra empty line at the end of a block (revive)
libnetwork/sandbox.go:571:36: empty-lines: extra empty line at the start of a block (revive)
libnetwork/service_common.go:317:246: empty-lines: extra empty line at the start of a block (revive)
libnetwork/endpoint.go:550:17: empty-lines: extra empty line at the end of a block (revive)
libnetwork/sandbox_dns_unix.go:213:106: empty-lines: extra empty line at the start of a block (revive)
libnetwork/controller.go:676:85: empty-lines: extra empty line at the end of a block (revive)
libnetwork/agent.go:876:60: empty-lines: extra empty line at the end of a block (revive)
libnetwork/resolver.go:324:69: empty-lines: extra empty line at the end of a block (revive)
libnetwork/network.go:1153:92: empty-lines: extra empty line at the end of a block (revive)
libnetwork/network.go:1955:67: empty-lines: extra empty line at the start of a block (revive)
libnetwork/network.go:2235:9: empty-lines: extra empty line at the start of a block (revive)
libnetwork/libnetwork_internal_test.go:336:26: empty-lines: extra empty line at the start of a block (revive)
libnetwork/resolver_test.go:76:35: empty-lines: extra empty line at the end of a block (revive)
libnetwork/libnetwork_test.go:303:38: empty-lines: extra empty line at the end of a block (revive)
libnetwork/libnetwork_test.go:985:46: empty-lines: extra empty line at the end of a block (revive)
libnetwork/ipam/allocator_test.go:1263:37: empty-lines: extra empty line at the start of a block (revive)
libnetwork/errors_test.go:9:40: empty-lines: extra empty line at the end of a block (revive)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit cd381aea56)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This function effectively is a constructor, so rename it to better describe
it's functionality.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 267108e113)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This method was an exported method, but only used as part of ParseConfigOptions,
so inlining it.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 09cc2f9d0e)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
It was unclear what the distinction was between these configuration
structs, so merging them to simplify.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 528428919e)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This was used for testing purposes when libnetwork was in a separate repo, using
the dnet utility, which was removed in 7266a956a8.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 571baffd59)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Libnetwork configuration files were only used as part of integration tests using
the dnet utility, which was removed in 7266a956a8
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 46f4a45769)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This method was only used in a single place; inlining it makes it
easier to see what's done.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 7d574f5ac6)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These were no longer used.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit a8a8bd1e42)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
When userland-proxy is turned off and on again, the iptables nat rule
doing hairpinning isn't properly removed. This fix makes sure this nat
rule is removed whenever the bridge is torn down or hairpinning is
disabled (through setting userland-proxy to true).
Unlike for ip masquerading and ICC, the `programChainRule()` call
setting up the "MASQ LOCAL HOST" rule has to be called unconditionally
because the hairpin parameter isn't restored from the driver store, but
always comes from the driver config.
For the "SKIP DNAT" rule, things are a bit different: this rule is
always deleted by `removeIPChains()` when the bridge driver is
initialized.
Fixes#44721.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
(cherry picked from commit 566a2e4)
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
Conntrack entries are created for UDP flows even if there's nowhere to
route these packets (ie. no listening socket and no NAT rules to
apply). Moreover, iptables NAT rules are evaluated by netfilter only
when creating a new conntrack entry.
When Docker adds NAT rules, netfilter will ignore them for any packet
matching a pre-existing conntrack entry. In such case, when
dockerd runs with userland proxy enabled, packets got routed to it and
the main symptom will be bad source IP address (as shown by #44688).
If the publishing container is run through Docker Swarm or in
"standalone" Docker but with no userland proxy, affected packets will
be dropped (eg. routed to nowhere).
As such, Docker needs to flush all conntrack entries for published UDP
ports to make sure NAT rules are correctly applied to all packets.
- Fixes#44688
- Fixes#8795
- Fixes#16720
- Fixes#7540
- Fixesmoby/libnetwork#2423
- and probably more.
As a precautionary measure, those conntrack entries are also flushed
when revoking external connectivity to avoid those entries to be reused
when a new sandbox is created (although the kernel should already
prevent such case).
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
(cherry picked from commit b37d34307d)
Signed-off-by: Cory Snider <csnider@mirantis.com>
iptables -C flag was introduced in v1.4.11, which was released ten
years ago. Thus, there're no more Linux distributions supported by
Docker using this version. As such, this commit removes the old way of
checking if an iptables rule exists (by using substring matching).
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
(cherry picked from commit 799cc143c9)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The former was doing some checks and logging warnings, whereas
the latter was doing the same checks but to set some internal variables.
As both are called only once and from the same place, there're now
merged together.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
(cherry picked from commit 205e5278c6)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
iptables package has a function `detectIptables()` called to initialize
some local variables. Since v20.10.0, it first looks for iptables bin,
then ip6tables and finally it checks what iptables flags are available
(including -C). It early exits when ip6tables isn't available, and
doesn't execute the last check.
To remove port mappings (eg. when a container stops/dies), Docker
first checks if those NAT rules exist and then deletes them. However, in
the particular case where there's no ip6tables bin available, iptables
`-C` flag is considered unavailable and thus it looks for NAT rules by
using some substring matching. This substring matching then fails
because `iptables -t nat -S POSTROUTING` dumps rules in a slighly format
than what's expected.
For instance, here's what `iptables -t nat -S POSTROUTING` dumps:
```
-A POSTROUTING -s 172.18.0.2/32 -d 172.18.0.2/32 -p tcp -m tcp --dport 9999 -j MASQUERADE
```
And here's what Docker looks for:
```
POSTROUTING -p tcp -s 172.18.0.2 -d 172.18.0.2 --dport 9999 -j MASQUERADE
```
Because of that, those rules are considered non-existant by Docker and
thus never deleted. To fix that, this change reorders the code in
`detectIptables()`.
Fixes#42127.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
(cherry picked from commit af7236f85a)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- use local variables for chains instead of sharing global variables
- make createNewChain a t.Helper
Signed-off-by: Chee Hau Lim <ch33hau@gmail.com>
(cherry picked from commit a2cea992c2)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These functions were used in 63a7ccdd23, which was
part of Docker v1.5.0 and v1.6.0, but removed in Docker v1.7.0 when the network
stack was replaced with libnetwork in d18919e304.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 49de15cdcc)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Remove the "deadcode", "structcheck", and "varcheck" linters, as they are
deprecated:
WARN [runner] The linter 'deadcode' is deprecated (since v1.49.0) due to: The owner seems to have abandoned the linter. Replaced by unused.
WARN [runner] The linter 'structcheck' is deprecated (since v1.49.0) due to: The owner seems to have abandoned the linter. Replaced by unused.
WARN [runner] The linter 'varcheck' is deprecated (since v1.49.0) due to: The owner seems to have abandoned the linter. Replaced by unused.
WARN [linters context] structcheck is disabled because of generics. You can track the evolution of the generics support by following the https://github.com/golangci/golangci-lint/issues/2649.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 2f1c382a6d)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
After discussing in the maintainers meeting, we concluded that Slowloris attacks
are not a real risk other than potentially having some additional goroutines
lingering around, so setting a long timeout to satisfy the linter, and to at
least have "some" timeout.
libnetwork/diagnostic/server.go:96:10: G112: Potential Slowloris Attack because ReadHeaderTimeout is not configured in the http.Server (gosec)
srv := &http.Server{
Addr: net.JoinHostPort(ip, strconv.Itoa(port)),
Handler: s,
}
api/server/server.go:60:10: G112: Potential Slowloris Attack because ReadHeaderTimeout is not configured in the http.Server (gosec)
srv: &http.Server{
Addr: addr,
},
daemon/metrics_unix.go:34:13: G114: Use of net/http serve function that has no support for setting timeouts (gosec)
if err := http.Serve(l, mux); err != nil && !strings.Contains(err.Error(), "use of closed network connection") {
^
cmd/dockerd/metrics.go:27:13: G114: Use of net/http serve function that has no support for setting timeouts (gosec)
if err := http.Serve(l, mux); err != nil && !strings.Contains(err.Error(), "use of closed network connection") {
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 55fd77f724)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
also ran gofmt with go1.19
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 58413c15cb)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The linter falsely detects this as using "math/rand":
libnetwork/networkdb/cluster.go:721:14: G404: Use of weak random number generator (math/rand instead of crypto/rand) (gosec)
val, err := rand.Int(rand.Reader, big.NewInt(int64(n)))
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 561a010161)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Use net.JoinHostPort to account for IPv6 addresses.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit a33d1f9a7c)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
In network node change test, the expected behavior is focused on how many nodes
left in networkDB, besides timing issues, things would also go tricky for a
leave-then-join sequence, if the check (counting the nodes) happened before the
first "leave" event, then the testcase actually miss its target and report PASS
without verifying its final result; if the check happened after the 'leave' event,
but before the 'join' event, the test would report FAIL unnecessary;
This code change would check both the db changes and the node count, it would
report PASS only when networkdb has indeed changed and the node count is expected.
Signed-off-by: David Wang <00107082@163.com>
(cherry picked from commit f499c6b9ec)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The correct formatting for machine-readable comments is;
//<some alphanumeric identifier>:<options>[,<option>...][ // comment]
Which basically means:
- MUST NOT have a space before `<identifier>` (e.g. `nolint`)
- Identified MUST be alphanumeric
- MUST be followed by a colon
- MUST be followed by at least one `<option>`
- Optionally additional `<options>` (comma-separated)
- Optionally followed by a comment
Any other format will not be considered a machine-readable comment by `gofmt`,
and thus formatted as a regular comment. Note that this also means that a
`//nolint` (without anything after it) is considered invalid, same for `//#nosec`
(starts with a `#`).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 4f08346686)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Older versions of Go don't format comments, so committing this as
a separate commit, so that we can already make these changes before
we upgrade to Go 1.19.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 52c1a2fae8)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
libnetwork/firewall_linux.go:11:21: var-declaration: should drop = nil from declaration of var ctrl; it is the zero value (revive)
ctrl *controller = nil
^
distribution/pull_v2_test.go:213:4: S1038: should use t.Fatalf(...) instead of t.Fatal(fmt.Sprintf(...)) (gosimple)
t.Fatal(fmt.Sprintf("expected formatPlatform to show windows platform with a version, but got '%s'", result))
^
integration-cli/docker_cli_build_test.go:5951:3: S1038: should use c.Skipf(...) instead of c.Skip(fmt.Sprintf(...)) (gosimple)
c.Skip(fmt.Sprintf("Bug fixed in 18.06 or higher.Skipping it for %s", testEnv.DaemonInfo.ServerVersion))
^
integration-cli/docker_cli_daemon_test.go:240:3: S1038: should use c.Skipf(...) instead of c.Skip(fmt.Sprintf(...)) (gosimple)
c.Skip(fmt.Sprintf("New base device size (%v) must be greater than (%s)", units.HumanSize(float64(newBasesizeBytes)), units.HumanSize(float64(oldBasesizeBytes))))
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
bump netlink to 1.2.1
change usages of netlink handle .Delete() to Close()
remove superfluous replace in vendor.mod
make requires of github.com/Azure/go-ansiterm direct
Signed-off-by: Martin Braun <braun@neuroforge.de>
Since commit 2c4a868f64, Docker doesn't
use the value of net.ipv4.ip_local_port_range when choosing an ephemeral
port. This change reverts back to the previous behavior.
Fixes#43054.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
Previously, with the patch from #43146, it was possible for a
network configured with a single ingress or load balancer on a
distribution which does not have the `ip_vs` kernel module loaded
by default to try to apply sysctls which did not exist yet, and
subsequently dynamically load the module as part of ipvs/netlink.go.
This module is vendored, and not a great place to try to tie back
into core libnetwork functionality, so also ensure that the sysctls
(which are idempotent) are called after ingress/lb creation once
`ipvs` has been initialized.
Signed-off-by: Ryan Barry <rbarry@mirantis.com>
