The "Capability" type defines DataScope and ConnectivityScope fields,
but their value was set from consts in the datastore package, which
required importing that package and its dependencies for the consts
only.
This patch:
- Moves the consts to a separate "scope" package
- Adds aliases for the consts in the datastore package.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
It only had a single implementation, so let's remove the interface.
While changing, also renaming;
- datastore.DataStore -> datastore.Store
- datastore.NewDataStore -> datastore.New
- datastore.NewDataStoreFromConfig -> datastore.FromConfig
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `store.Watch()` was only used in `Controller.processEndpointCreate()`,
and skipped if the store was not "watchable" (`store.Watchable()`).
Whether a store is watchable depends on the store's datastore.scope;
local stores are not watchable;
func (ds *datastore) Watchable() bool {
return ds.scope != LocalScope
}
datastore is only initialized in two locations, and both locations set the
scope field to LocalScope:
datastore.newClient() (also called by datastore.NewDataStore()):
3e4c9d90cf/libnetwork/datastore/datastore.go (L213)
datastore.NewTestDataStore() (used in tests);
3e4c9d90cf/libnetwork/datastore/datastore_test.go (L14-L17)
Furthermore, the backing BoltDB kvstore does not implement the Watch()
method;
3e4c9d90cf/libnetwork/internal/kvstore/boltdb/boltdb.go (L464-L467)
Based on the above;
- our datastore is never Watchable()
- so datastore.Watch() is never used
This patch removes the Watchable(), Watch(), and RestartWatch() functions,
as well as the code handling watching.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Without (*Controller).ReloadConfiguration, the only way to configure
datastore scopes would be by passing config.Options to libnetwork.New.
The only options defined which relate to datastore scopes are limited to
configuring the local-scope datastore. Furthermore, the default
datastore config only defines configuration for the local-scope
datastore. The local-scope datastore is therefore the only datastore
scope possible in libnetwork. Start removing code which is only
needed to support multiple datastore scopes.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Embedded structs are part of the exported surface of a struct type.
Boxing a struct value into an interface value does not erase that;
any code could gain access to the embedded struct value with a simple
type assertion. The mutex is supposed to be a private implementation
detail, but *network implements sync.Locker because the mutex is
embedded. Change the mutex to an unexported field so *network no
longer spuriously implements the sync.Locker interface.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Embedded structs are part of the exported surface of a struct type.
Boxing a struct value into an interface value does not erase that;
any code could gain access to the embedded struct value with a simple
type assertion. The mutex is supposed to be a private implementation
detail, but *controller implements sync.Locker because the mutex is
embedded.
c, _ := libnetwork.New()
c.(sync.Locker).Lock()
Change the mutex to an unexported field so *controller no longer
spuriously implements the sync.Locker interface.
Signed-off-by: Cory Snider <csnider@mirantis.com>
libnetwork/etchosts/etchosts_test.go:167:54: empty-lines: extra empty line at the end of a block (revive)
libnetwork/osl/route_linux.go:185:74: empty-lines: extra empty line at the start of a block (revive)
libnetwork/osl/sandbox_linux_test.go:323:36: empty-lines: extra empty line at the start of a block (revive)
libnetwork/bitseq/sequence.go:412:48: empty-lines: extra empty line at the start of a block (revive)
libnetwork/datastore/datastore_test.go:67:46: empty-lines: extra empty line at the end of a block (revive)
libnetwork/datastore/mock_store.go:34:60: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/firewalld.go:202:44: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/firewalld_test.go:76:36: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/iptables.go:256:67: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/iptables.go:303:128: empty-lines: extra empty line at the start of a block (revive)
libnetwork/networkdb/cluster.go:183:72: empty-lines: extra empty line at the end of a block (revive)
libnetwork/ipams/null/null_test.go:44:38: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/macvlan/macvlan_store.go:45:52: empty-lines: extra empty line at the end of a block (revive)
libnetwork/ipam/allocator_test.go:1058:39: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/bridge/port_mapping.go:88:111: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/bridge/link.go:26:90: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/bridge/setup_ipv6_test.go:17:34: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/bridge/setup_ip_tables.go:392:4: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/bridge/bridge.go:804:50: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/ov_serf.go:183:29: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/ov_utils.go:81:64: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/overlay/peerdb.go:172:67: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/peerdb.go:209:67: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/peerdb.go:344:89: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/peerdb.go:436:63: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/overlay.go:183:36: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/encryption.go:69:28: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/overlay/ov_network.go:563:81: empty-lines: extra empty line at the start of a block (revive)
libnetwork/default_gateway.go:32:43: empty-lines: extra empty line at the start of a block (revive)
libnetwork/errors_test.go:9:40: empty-lines: extra empty line at the start of a block (revive)
libnetwork/service_common.go:184:64: empty-lines: extra empty line at the end of a block (revive)
libnetwork/endpoint.go:161:55: empty-lines: extra empty line at the end of a block (revive)
libnetwork/store.go:320:33: empty-lines: extra empty line at the end of a block (revive)
libnetwork/store_linux_test.go:11:38: empty-lines: extra empty line at the end of a block (revive)
libnetwork/sandbox.go:571:36: empty-lines: extra empty line at the start of a block (revive)
libnetwork/service_common.go:317:246: empty-lines: extra empty line at the start of a block (revive)
libnetwork/endpoint.go:550:17: empty-lines: extra empty line at the end of a block (revive)
libnetwork/sandbox_dns_unix.go:213:106: empty-lines: extra empty line at the start of a block (revive)
libnetwork/controller.go:676:85: empty-lines: extra empty line at the end of a block (revive)
libnetwork/agent.go:876:60: empty-lines: extra empty line at the end of a block (revive)
libnetwork/resolver.go:324:69: empty-lines: extra empty line at the end of a block (revive)
libnetwork/network.go:1153:92: empty-lines: extra empty line at the end of a block (revive)
libnetwork/network.go:1955:67: empty-lines: extra empty line at the start of a block (revive)
libnetwork/network.go:2235:9: empty-lines: extra empty line at the start of a block (revive)
libnetwork/libnetwork_internal_test.go:336:26: empty-lines: extra empty line at the start of a block (revive)
libnetwork/resolver_test.go:76:35: empty-lines: extra empty line at the end of a block (revive)
libnetwork/libnetwork_test.go:303:38: empty-lines: extra empty line at the end of a block (revive)
libnetwork/libnetwork_test.go:985:46: empty-lines: extra empty line at the end of a block (revive)
libnetwork/ipam/allocator_test.go:1263:37: empty-lines: extra empty line at the start of a block (revive)
libnetwork/errors_test.go:9:40: empty-lines: extra empty line at the end of a block (revive)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
We had some hosts with quite a bit of cycling containers that ocassionally causes docker daemons to lock up.
Most prominently `docker run` commands do not respond and nothing happens anymore.
Looking at the stack trace the following is at least likely sometimes a cause to that:
Two goroutines g0 and g1 can race against each other:
* (g0) 1. getSvcRecords is called and calls (*network).Lock()
--> Network is locked.
* (g1) 2. processEndpointDelete is called, and calls (*controller).Lock()
--> Controller is locked
* (g1) 3. processEndpointDelete tries (*network).ID() which calls (*network).Lock().
* (g0) 4. getSvcRecords calls (*controller).Lock().
3./4. are deadlocked against each other since the other goroutine holds the lock they need.
References b5dc370370/network.go
Signed-off-by: Steffen Butzer <steffen.butzer@outlook.com>
After moving libnetwork to this repo, we need to update all the import
paths for libnetwork to point to docker/docker/libnetwork instead of
docker/libnetwork.
This change implements that.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Fix 'failed to get network during CreateEndpoint' during container starting.
Change the error type to `libnetwork.ErrNoSuchNetwork`, so `Start()` in `daemon/cluster/executor/container/controller.go` will recreate the network.
Signed-off-by: Xinfeng Liu <xinfeng.liu@gmail.com>
This function always returned `nil`, so we can remove the error
return, and update other functions that were handling errors.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Change the Delete() method to take optional options and add
NetworkDeleteOptionRemoveLB as one such option. This option allows
explicit removal of an ingress network along with its load-balancing
endpoint if there are no other endpoints in the network. Prior to this,
the libnetwork client would have to manually search for and remove the
ingress load balancing endpoint from an ingress network. This was, of
course, completely hacky.
This commit will require a slight modification in moby to make use of
the option when deleting the ingress network.
Signed-off-by: Chris Telfer <ctelfer@docker.com>
endpoint_cnt object is created during network create and destroyed when
network is deleted. But the updateToStore function creates an object
when it is not present in the store. endpoint_cnt is a mutable object
and is updated during endpoint create and delete events. If endpoint
create or delete happens after the network is deleted, it can
incorrectly create an endpoint_cnt object in the store and that can
cause problems when the same network is created again later.
The fix is to not create the endpoint_cnt object when endpoint_cnt is
incremented or decremented
Signed-off-by: Madhu Venugopal <madhu@docker.com>
- It specifies whether the network driver can
provide containers connectivity across hosts.
- As of now, the data scope of the driver was
being overloaded with this notion.
- The driver scope information is still valid
and it defines whether the data allocation
of the network resources can be done globally
or only locally.
- With the scope network option, user can now
force a network as swarm scoped
regardless of the driver data scope.
- In case the network is configured as swarm scoped,
and the network driver is multihost capable,
a network DB instance will be launched for it.
Signed-off-by: Alessandro Boch <aboch@docker.com>
- They are configuration-only networks which
can be used to supply the configuration
when creating regular networks.
- They do not get allocated and do net get plumbed.
Drivers do not get to know about them.
- They can be removed, once no other network is
using them.
- When user creates a network specifying a
configuration network for the config, no
other network specific configuration field
is are accepted. User can only specify
network operator fields (attachable, internal,...)
- They do not need to have a driver field, that
field gets actually reset upon creation.
Signed-off-by: Alessandro Boch <aboch@docker.com>
getNetworksFromStore reads networks and endpoint_cnt from the kvstores.
endpoint_cnt especially is read in a for-loop for each network and that
causes a lot of stress in poorly performing KV-Stores.
This fix eases the load on the kvstore by fetching all the endpoint_cnt
in a single read and the operation is performed on it.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
This fix tries to fix logrus formatting by removing `f` from
`logrus.[Error|Warn|Debug|Fatal|Panic|Info]f` when formatting string
is not present.
Also fix import name to use original project name 'logrus' instead of
'log'
Signed-off-by: Daehyeok Mun <daehyeok@gmail.com>
Avoid the whole store endpoint update logic when running in swarm mode
and the endpoint is part of a global scope network. Currently there is
no store update that is happening for global scope networks in swarm
mode, but this code path will delete the svcRecords database when the
last endpoint on the network is removed which is something that is not
required.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
- Earlier this was guaranteed by ipam driver intialization
which was not creating a global address space if the
global datastore was missing. Now that ipam address spaces
can be initialized with no backing datastore, insert an
explicit check in libnetwork, which should have been there
regardless.
Signed-off-by: Alessandro Boch <aboch@docker.com>
Add a notion of service in libnetwork so that a group of endpoints
which form a service can be treated as such so that service level
features can be added on top. Initially as part of this PR the support
to assign a name to the said service is added which results in DNS
queries to the service name to return all the IPs of the backing
endpoints so that DNS RR behavior on the service name can be achieved.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
Currently datastore has dependencies on various kv backends.
This is undesirable if datastore had to be used as a backend
agnostic store management package with it's cache layer. This
PR aims to achieve that.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
With the current implementation, a config relaod event causes all the
datastores to reinitialize and that impacts objects with Persist=false
such as none and host network.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
- ... on ungraceful shutdown during network create
- Allow forceful deletion of network
- On network delete, first mark the network for deletion
- On controller creation, first forcely remove any network
that is marked for deletion.
Signed-off-by: Alessandro Boch <aboch@docker.com>
