This will return a single entry for each name/value pair, and for now
all the "image specific" metadata (labels, config, size) should be
either "default platform" or "first platform we have locally" (which
then matches the logic for commands like `docker image inspect`, etc)
with everything else (just ID, maybe?) coming from the manifest
list/index.
That leaves room for the longer-term implementation to add new fields to
describe the _other_ images that are part of the manifest list/index.
Co-authored-by: Tianon Gravi <admwiggin@gmail.com>
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
DNS names were only set up for user-defined networks. On Linux, none
of the built-in networks (bridge/host/none) have built-in DNS, so they
don't need DNS names.
But, on Windows, the default network is "nat" and it does need the DNS
names.
Signed-off-by: Rob Murray <rob.murray@docker.com>
Non-swarm networks created before network-creation-time validation
was added in 25.0.0 continued working, because the checks are not
re-run.
But, swarm creates networks when needed (with 'agent=true'), to
ensure they exist on each agent - ignoring the NetworkNameError
that says the network already existed.
By ignoring validation errors on creation of a network with
agent=true, pre-existing swarm networks with IPAM config that would
fail the new checks will continue to work too.
New swarm (overlay) networks are still validated, because they are
initially created with 'agent=false'.
Signed-off-by: Rob Murray <rob.murray@docker.com>
This const contains the minimum API version that can be supported by the
API server. The daemon is currently configured to use the same version,
but we may increment the _configured_ minimum version when deprecating
old API versions in future.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Commit 08e4e88482 (Docker Engine v25.0.0)
deprecated API version v1.23 and lower, but older API versions could be
enabled through the DOCKER_MIN_API_VERSION environment variable.
This patch removes all support for API versions < v1.24.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
API v1.20 (Docker Engine v1.11.0) and older allowed a HostConfig to be passed
when starting a container. This feature was deprecated in API v1.21 (Docker
Engine v1.10.0) in 3e7405aea8, and removed in
API v1.23 (Docker Engine v1.12.0) in commit 0a8386c8be.
API v1.23 and older are deprecated, and this patch removes the feature.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This endpoint was deprecated in API v1.20 (Docker Engine v1.8.0) in
commit db9cc91a9e, in favor of the
`PUT /containers/{id}/archive` and `HEAD /containers/{id}/archive`
endpoints, and disabled in API v1.24 (Docker Engine v1.12.0) through
commit 428328908d.
This patch removes the endpoint, and the associated `daemon.ContainerCopy`
method in the backend.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
API v1.23 and older are deprecated, so we can remove the code to adjust
responses for API v1.20 and lower.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
API v1.23 and older are deprecated, so we can remove the code to adjust
responses for API v1.19 and lower.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
API versions before 1.19 allowed CpuShares that were greater than the maximum
or less than the minimum supported by the kernel, and relied on the kernel to
do the right thing.
Commit ed39fbeb2a introduced code to adjust the
CPU shares to be within the accepted range when using API version 1.18 or
lower.
API v1.23 and older are deprecated, so we can remove support for this
functionality.
Currently, there's no validation for CPU shares to be within an acceptable
range; a TODO was added to add validation for this option, and to use the
`linuxMinCPUShares` and `linuxMaxCPUShares` consts for this.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Inspect and history used two different ways to find the present images.
This made history fail in some cases where image inspect would work (if
a configuration of a manifest wasn't found in the content store).
With this change we now use the same logic for both inspect and history.
Signed-off-by: Djordje Lukic <djordje.lukic@docker.com>
Do not set 'Config.MacAddress' in inspect output unless the MAC address
is configured.
Also, make sure it is filled in for a configured address on the default
network before the container is started (by translating the network name
from 'default' to 'config' so that the address lookup works).
Signed-off-by: Rob Murray <rob.murray@docker.com>
The API's EndpointConfig struct has a MacAddress field that's used for
both the configured address, and the current address (which may be generated).
A configured address must be restored when a container is restarted, but a
generated address must not.
The previous attempt to differentiate between the two, without adding a field
to the API's EndpointConfig that would show up in 'inspect' output, was a
field in the daemon's version of EndpointSettings, MACOperational. It did
not work, MACOperational was set to true when a configured address was
used. So, while it ensured addresses were regenerated, it failed to preserve
a configured address.
So, this change removes that code, and adds DesiredMacAddress to the wrapped
version of EndpointSettings, where it is persisted but does not appear in
'inspect' results. Its value is copied from MacAddress (the API field) when
a container is created.
Signed-off-by: Rob Murray <rob.murray@docker.com>
The bbolt library wants exclusive access to the boltdb file and uses
file locking to assure that is the case. The controller and each network
driver that needs persistent storage instantiates its own unique
datastore instance, backed by the same boltdb file. The boltdb kvstore
implementation works around multiple access to the same boltdb file by
aggressively closing the boltdb file between each transaction. This is
very inefficient. Have the controller pass its datastore instance into
the drivers and enable the PersistConnection option to disable closing
the boltdb between transactions.
Set data-dir in unit tests which instantiate libnetwork controllers so
they don't hang trying to lock the default boltdb database file.
Signed-off-by: Cory Snider <csnider@mirantis.com>
If a reader has caught up to the logger and is waiting for the next
message, it should stop waiting when the logger is closed. Otherwise
the reader will unnecessarily wait the full closedDrainTimeout for no
log messages to arrive.
This case was overlooked when the journald reader was recently
overhauled to be compatible with systemd 255, and the reader tests only
failed when a logical race happened to settle in such a way to exercise
the bugged code path. It was only after implicit flushing on close was
added to the journald test harness that the Follow tests would
repeatably fail due to this bug. (No new regression tests are needed.)
Signed-off-by: Cory Snider <csnider@mirantis.com>
The journald reader test harness injects an artificial asynchronous
delay into the logging pipeline: a logged message won't be written to
the journal until at least 150ms after the Log() call returns. If a test
returns while log messages are still in flight to be written, the logs
may attempt to be written after the TempDir has been cleaned up, leading
to spurious errors.
The logger read tests which interleave writing and reading have to
include explicit synchronization points to work reliably with this delay
in place. On the other hand, tests should not be required to sync the
logger explicitly before returning. Override the Close() method in the
test harness wrapper to wait for in-flight logs to be flushed to disk.
Signed-off-by: Cory Snider <csnider@mirantis.com>
- Check the return value when logging messages
- Log the stream (stdout/stderr) and list of messages that were not read
- Wait until the logger is closed before returning early (panic/fatal)
Signed-off-by: Cory Snider <csnider@mirantis.com>
Writing the systemd-journal-remote command output directly to os.Stdout
and os.Stderr makes it nearly impossible to tell which test case the
output is related to when the tests are not run in verbose mode. Extend
the journald sender fake to redirect output to the test log so they
interleave with the rest of the test output.
Signed-off-by: Cory Snider <csnider@mirantis.com>
The Go race detector was detecting a data race when running the
TestLogRead/Follow/Concurrent test against the journald logging driver.
The race was in the test harness, specifically syncLogger. The waitOn
field would be reassigned each time a log entry is sent to the journal,
which is not concurrency-safe. Make it concurrency-safe using the same
patterns that are used in the log follower implementation to synchronize
with the logger.
Signed-off-by: Cory Snider <csnider@mirantis.com>
When saving an image treat `image@sha256:abcdef...` the same as
`abcdef...`, this makes it:
- Not export the digested tag as the image name
- Not try to export all tags from the image repository
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
errDrainDone is a sentinel error which is never supposed to escape the
package. Consequently, it needs to be filtered out of returns all over
the place, adding boilerplate. Forgetting to filter out these errors
would be a logic bug which the compiler would not help us catch. Replace
it with boolean multi-valued returns as they can't be accidentally
ignored or propagated.
Signed-off-by: Cory Snider <csnider@mirantis.com>
While it doesn't really matter if the reader waits for an extra
arbitrary period beyond an arbitrary hardcoded timeout, it's also
trivial and cheap to implement, and nice to have.
Signed-off-by: Cory Snider <csnider@mirantis.com>
The journald reader uses a timer to set an upper bound on how long to
wait for the final log message of a stopped container. However, the
timer channel is only received from in non-blocking select statements!
There isn't enough benefit of using a timer to offset the cost of having
to manage the timer resource. Setting a deadline and comparing the
current time is just as effective, without having to manage the
lifecycle of any runtime resources.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Synthesize a boot ID for journal entries fed into
systemd-journal-remote, as required by systemd 255.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Following logs with a non-negative tail when the container log is empty
is broken on the journald driver when used with systemd 255. Add tests
which cover this edge case to our loggertest suite.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Store additional image property which makes it possible to distinguish
if image was built locally.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
This is a follow-up to 2cf230951f, adding
more directives to adjust for some new code added since:
Before this patch:
make -C ./internal/gocompat/
GO111MODULE=off go generate .
GO111MODULE=on go mod tidy
GO111MODULE=on go test -v
# github.com/docker/docker/internal/sliceutil
internal/sliceutil/sliceutil.go:3:12: type parameter requires go1.18 or later (-lang was set to go1.16; check go.mod)
internal/sliceutil/sliceutil.go:3:14: predeclared comparable requires go1.18 or later (-lang was set to go1.16; check go.mod)
internal/sliceutil/sliceutil.go:4:19: invalid map key type T (missing comparable constraint)
# github.com/docker/docker/libnetwork
libnetwork/endpoint.go:252:17: implicit function instantiation requires go1.18 or later (-lang was set to go1.16; check go.mod)
# github.com/docker/docker/daemon
daemon/container_operations.go:682:9: implicit function instantiation requires go1.18 or later (-lang was set to go1.16; check go.mod)
daemon/inspect.go:42:18: implicit function instantiation requires go1.18 or later (-lang was set to go1.16; check go.mod)
With this patch:
make -C ./internal/gocompat/
GO111MODULE=off go generate .
GO111MODULE=on go mod tidy
GO111MODULE=on go test -v
=== RUN TestModuleCompatibllity
main_test.go:321: all packages have the correct go version specified through //go:build
--- PASS: TestModuleCompatibllity (0.00s)
PASS
ok gocompat 0.031s
make: Leaving directory '/go/src/github.com/docker/docker/internal/gocompat'
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
We need to isolate the images that we are remapping to a userns, we
can't mix them with "normal" images. In the graph driver case this means
we create a new root directory where we store the images and everything
else, in the containerd case we can use a new namespace.
Signed-off-by: Djordje Lukic <djordje.lukic@docker.com>
To prevent a circular import between api/types and api/types image,
the RequestPrivilegeFunc reference was not moved, but defined as
part of the PullOptions / PushOptions.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
