… or could be in `opts` package. Having `runconfig/opts` and `opts`
doesn't really make sense and make it difficult to know where to put
some code.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Signed-off-by: Evan Hazlett <ejhazlett@gmail.com>
use secret store interface instead of embedded secret data into container
Signed-off-by: Evan Hazlett <ejhazlett@gmail.com>
`StreamConfig` carries with it a dep on libcontainerd, which is used by
other projects, but libcontainerd doesn't compile on all platforms, so
move it to `github.com/docker/docker/container/stream`
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Fixes#22564
When an error occurs on mount, there should not be any call later to
unmount. This can throw off refcounting in the underlying driver
unexpectedly.
Consider these two cases:
```
$ docker run -v foo:/bar busybox true
```
```
$ docker run -v foo:/bar -w /foo busybox true
```
In the first case, if mounting `foo` fails, the volume driver will not
get a call to unmount (this is the incorrect behavior).
In the second case, the volume driver will not get a call to unmount
(correct behavior).
This occurs because in the first case, `/bar` does not exist in the
container, and as such there is no call to `volume.Mount()` during the
`create` phase. It will error out during the `start` phase.
In the second case `/bar` is created before dealing with the volume
because of the `-w`. Because of this, when the volume is being setup
docker will try to copy the image path contents in the volume, in which
case it will attempt to mount the volume and fail. This happens during
the `create` phase. This makes it so the container will not be created
(or at least fully created) and the user gets the error on `create`
instead of `start`. The error handling is different in these two phases.
Changed to only send `unmount` if the volume is mounted.
While investigating the cause of the reported issue I found some odd
behavior in unmount calls so I've cleaned those up a bit here as well.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
- use /secrets for swarm secret create route
- do not specify omitempty for secret and secret reference
- simplify lookup for secret ids
- do not use pointer for secret grpc conversion
Signed-off-by: Evan Hazlett <ejhazlett@gmail.com>
- fix lint issues
- use errors pkg for wrapping errors
- cleanup on error when setting up secrets mount
- fix erroneous import
- remove unneeded switch for secret reference mode
- return single mount for secrets instead of slice
Signed-off-by: Evan Hazlett <ejhazlett@gmail.com>
This fix tries to add a flag `--stop-timeout` to specify the timeout value
(in seconds) for the container to stop before SIGKILL is issued. If stop timeout
is not specified then the default timeout (10s) is used.
Additional test cases have been added to cover the change.
This fix is related to #22471. Another pull request will add `--shutdown-timeout`
to daemon for #22471.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
"VolumeDriver.Mount" is being called on container start.
Make the symmetric call on container stop.
Signed-off-by: Anusha Ragunathan <anusha@docker.com>
This removes the SetStoppedLocking, and
SetRestartingLocking functions, which
were not used anywhere.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
`Mounts` allows users to specify in a much safer way the volumes they
want to use in the container.
This replaces `Binds` and `Volumes`, which both still exist, but
`Mounts` and `Binds`/`Volumes` are exclussive.
The CLI will continue to use `Binds` and `Volumes` due to concerns with
parsing the volume specs on the client side and cross-platform support
(for now).
The new API follows exactly the services mount API.
Example usage of `Mounts`:
```
$ curl -XPOST localhost:2375/containers/create -d '{
"Image": "alpine:latest",
"HostConfig": {
"Mounts": [{
"Type": "Volume",
"Target": "/foo"
},{
"Type": "bind",
"Source": "/var/run/docker.sock",
"Target": "/var/run/docker.sock",
},{
"Type": "volume",
"Name": "important_data",
"Target": "/var/data",
"ReadOnly": true,
"VolumeOptions": {
"DriverConfig": {
Name: "awesomeStorage",
Options: {"size": "10m"},
Labels: {"some":"label"}
}
}]
}
}'
```
There are currently 2 types of mounts:
- **bind**: Paths on the host that get mounted into the
container. Paths must exist prior to creating the container.
- **volume**: Volumes that persist after the
container is removed.
Not all fields are available in each type, and validation is done to
ensure these fields aren't mixed up between types.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This PR adds support for running regular containers to be connected to
swarm mode multi-host network so that:
- containers connected to the same network across the cluster can
discover and connect to each other.
- Get access to services(and their associated loadbalancers)
connected to the same network
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
"--restart" and "--rm" are conflict options, if a container is started
with AutoRemove flag, we should forbid the update action for its Restart
Policy.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
The memory should always be smaller than memoryswap,
we should error out with message that user know how
to do rather than just an invalid argument error if
user update the memory limit bigger than already set
memory swap.
Signed-off-by: Lei Jitang <leijitang@huawei.com>
As described in our ROADMAP.md, introduce new Swarm management API
endpoints relying on swarmkit to deploy services. It currently vendors
docker/engine-api changes.
This PR is fully backward compatible (joining a Swarm is an optional
feature of the Engine, and existing commands are not impacted).
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
Signed-off-by: Victor Vieux <vieux@docker.com>
Signed-off-by: Daniel Nephin <dnephin@docker.com>
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
Signed-off-by: Madhu Venugopal <madhu@docker.com>
This fix tries to fix logrus formatting by removing `f` from
`logrus.[Error|Warn|Debug|Fatal|Panic|Info]f` when formatting string
is not present.
This fix fixes#23459.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
If we attach to a running container and stream is closed afterwards, we
can never be sure if the container is stopped or detached. Adding a new
type of `detach` event can explicitly notify client that container is
detached, so client will know that there's no need to wait for its exit
code and it can move forward to next step now.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
This PR adds support for user-defined health-check probes for Docker
containers. It adds a `HEALTHCHECK` instruction to the Dockerfile syntax plus
some corresponding "docker run" options. It can be used with a restart policy
to automatically restart a container if the check fails.
The `HEALTHCHECK` instruction has two forms:
* `HEALTHCHECK [OPTIONS] CMD command` (check container health by running a command inside the container)
* `HEALTHCHECK NONE` (disable any healthcheck inherited from the base image)
The `HEALTHCHECK` instruction tells Docker how to test a container to check that
it is still working. This can detect cases such as a web server that is stuck in
an infinite loop and unable to handle new connections, even though the server
process is still running.
When a container has a healthcheck specified, it has a _health status_ in
addition to its normal status. This status is initially `starting`. Whenever a
health check passes, it becomes `healthy` (whatever state it was previously in).
After a certain number of consecutive failures, it becomes `unhealthy`.
The options that can appear before `CMD` are:
* `--interval=DURATION` (default: `30s`)
* `--timeout=DURATION` (default: `30s`)
* `--retries=N` (default: `1`)
The health check will first run **interval** seconds after the container is
started, and then again **interval** seconds after each previous check completes.
If a single run of the check takes longer than **timeout** seconds then the check
is considered to have failed.
It takes **retries** consecutive failures of the health check for the container
to be considered `unhealthy`.
There can only be one `HEALTHCHECK` instruction in a Dockerfile. If you list
more than one then only the last `HEALTHCHECK` will take effect.
The command after the `CMD` keyword can be either a shell command (e.g. `HEALTHCHECK
CMD /bin/check-running`) or an _exec_ array (as with other Dockerfile commands;
see e.g. `ENTRYPOINT` for details).
The command's exit status indicates the health status of the container.
The possible values are:
- 0: success - the container is healthy and ready for use
- 1: unhealthy - the container is not working correctly
- 2: starting - the container is not ready for use yet, but is working correctly
If the probe returns 2 ("starting") when the container has already moved out of the
"starting" state then it is treated as "unhealthy" instead.
For example, to check every five minutes or so that a web-server is able to
serve the site's main page within three seconds:
HEALTHCHECK --interval=5m --timeout=3s \
CMD curl -f http://localhost/ || exit 1
To help debug failing probes, any output text (UTF-8 encoded) that the command writes
on stdout or stderr will be stored in the health status and can be queried with
`docker inspect`. Such output should be kept short (only the first 4096 bytes
are stored currently).
When the health status of a container changes, a `health_status` event is
generated with the new status. The health status is also displayed in the
`docker ps` output.
Signed-off-by: Thomas Leonard <thomas.leonard@docker.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
SELinux labeling should be disabled when using --privileged mode
/etc/hosts, /etc/resolv.conf, /etc/hostname should not be relabeled if they
are volume mounted into the container.
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
Currently, using a custom detach key with an invalid sequence, eats a
part of the sequence, making it weird and difficult to enter some key
sequence.
This fixes by keeping the input read when trying to see if it's the key
sequence or not, and "writing" then is the key sequence is not the right
one, preserving the initial input.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Rework memoryStore so that filters and apply run
on a cloned list of containers after the lock has
been released. This avoids possible deadlocks when
these filter/apply callbacks take locks for a
container.
Fixes#22732
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
This fix tries to address the issue raised in #22358 where syslog's
message tag always starts with `docker/` and can not be removed
by changing the log tag templates.
The issue is that syslog driver hardcodes `path.Base(os.Args[0])`
as the prefix, which is the binary file name of the daemon (`dockerd`).
This could be an issue for certain situations (e.g., #22358) where
user may prefer not to have a dedicated prefix in syslog messages.
There is no way to override this behavior in the current verison of
the docker.
This fix tries to address this issue without making changes in the
default behavior of the syslog driver. An additional
`{{.DaemonName}}` has been introduced in the syslog tag. This is
assigned as the `docker` when daemon starts. The default log tag
template has also been changed from
`path.Base(os.Args[0]) + "/{{.ID}}"` to `{{.DaemonName}}/{{.ID}}`.
Therefore, there is no behavior changes when log-tag is not provided.
In order to be consistent, the default log tag for fluentd has been
changed from `docker.{{.ID}}` to `{{DaemonName}}.{{.ID}}` as well.
The documentation for log-tag has been updated to reflect this change.
Additional test cases have been added to cover changes in this fix.
This fix fixes#22358.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
We need to have labels applied even if a container is running in privileged
mode. On an tightly locked down SELinux system, this will cause running
without labels will cause SELinux to block privileged mode containers.
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
This generates an ID string for calls to Mount/Unmount, allowing drivers
to differentiate between two callers of `Mount` and `Unmount`.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Remove function `WaitRunning` because it's actually not necessary, also
remove wait channel for state "running" to avoid mixed use of the state
wait channel.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Restore the 1.10 logic that will reset the restart manager's timeout or
backoff delay if a container executes longer than 10s reguardless of
exit status or policy.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Currently if you restart docker daemon, all the containers with restart
policy `on-failure` regardless of its `RestartCount` will be started,
this will make daemon cost more extra time for restart.
This commit will stop these containers to do unnecessary start on
daemon's restart.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
This allows a user to specify explicitly to enable
automatic copying of data from the container path to the volume path.
This does not change the default behavior of automatically copying, but
does allow a user to disable it at runtime.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Signed-off-by: John Howard <jhoward@microsoft.com>
Signed-off-by: John Starks <jostarks@microsoft.com>
Signed-off-by: Darren Stahl <darst@microsoft.com>
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
This allows users to provide a FQDN as hostname or to use distinct hostname and
domainname parts. Depends on https://github.com/docker/libnetwork/pull/950
Signed-off-by: Tim Hockin <thockin@google.com>
Attach can hang forever if there is no data to send. This PR adds notification
of Attach goroutine about container stop.
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
Correct creation of a non-existing WORKDIR during docker build to use
remapped root uid/gid on mkdir
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Moving all strings to the errors package wasn't a good idea after all.
Our custom implementation of Go errors predates everything that's nice
and good about working with errors in Go. Take as an example what we
have to do to get an error message:
```go
func GetErrorMessage(err error) string {
switch err.(type) {
case errcode.Error:
e, _ := err.(errcode.Error)
return e.Message
case errcode.ErrorCode:
ec, _ := err.(errcode.ErrorCode)
return ec.Message()
default:
return err.Error()
}
}
```
This goes against every good practice for Go development. The language already provides a simple, intuitive and standard way to get error messages, that is calling the `Error()` method from an error. Reinventing the error interface is a mistake.
Our custom implementation also makes very hard to reason about errors, another nice thing about Go. I found several (>10) error declarations that we don't use anywhere. This is a clear sign about how little we know about the errors we return. I also found several error usages where the number of arguments was different than the parameters declared in the error, another clear example of how difficult is to reason about errors.
Moreover, our custom implementation didn't really make easier for people to return custom HTTP status code depending on the errors. Again, it's hard to reason about when to set custom codes and how. Take an example what we have to do to extract the message and status code from an error before returning a response from the API:
```go
switch err.(type) {
case errcode.ErrorCode:
daError, _ := err.(errcode.ErrorCode)
statusCode = daError.Descriptor().HTTPStatusCode
errMsg = daError.Message()
case errcode.Error:
// For reference, if you're looking for a particular error
// then you can do something like :
// import ( derr "github.com/docker/docker/errors" )
// if daError.ErrorCode() == derr.ErrorCodeNoSuchContainer { ... }
daError, _ := err.(errcode.Error)
statusCode = daError.ErrorCode().Descriptor().HTTPStatusCode
errMsg = daError.Message
default:
// This part of will be removed once we've
// converted everything over to use the errcode package
// FIXME: this is brittle and should not be necessary.
// If we need to differentiate between different possible error types,
// we should create appropriate error types with clearly defined meaning
errStr := strings.ToLower(err.Error())
for keyword, status := range map[string]int{
"not found": http.StatusNotFound,
"no such": http.StatusNotFound,
"bad parameter": http.StatusBadRequest,
"conflict": http.StatusConflict,
"impossible": http.StatusNotAcceptable,
"wrong login/password": http.StatusUnauthorized,
"hasn't been activated": http.StatusForbidden,
} {
if strings.Contains(errStr, keyword) {
statusCode = status
break
}
}
}
```
You can notice two things in that code:
1. We have to explain how errors work, because our implementation goes against how easy to use Go errors are.
2. At no moment we arrived to remove that `switch` statement that was the original reason to use our custom implementation.
This change removes all our status errors from the errors package and puts them back in their specific contexts.
IT puts the messages back with their contexts. That way, we know right away when errors used and how to generate their messages.
It uses custom interfaces to reason about errors. Errors that need to response with a custom status code MUST implementent this simple interface:
```go
type errorWithStatus interface {
HTTPErrorStatusCode() int
}
```
This interface is very straightforward to implement. It also preserves Go errors real behavior, getting the message is as simple as using the `Error()` method.
I included helper functions to generate errors that use custom status code in `errors/errors.go`.
By doing this, we remove the hard dependency we have eeverywhere to our custom errors package. Yes, you can use it as a helper to generate error, but it's still very easy to generate errors without it.
Please, read this fantastic blog post about errors in Go: http://dave.cheney.net/2014/12/24/inspecting-errors
Signed-off-by: David Calavera <david.calavera@gmail.com>
Add `--restart` flag for `update` command, so we can change restart
policy for a container no matter it's running or stopped.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Currently, when running a container with --ipc=host, if /dev/mqueue is
a standard directory on the hos the daemon will bind mount it allowing
the container to create/modify files on the host.
This commit forces /dev/mqueue to always be of type mqueue except when
the user explicitely requested something to be bind mounted to
/dev/mqueue.
Signed-off-by: Kenfe-Mickael Laventure <mickael.laventure@gmail.com>
mqueue can not be mounted on the host os and then shared into the container.
There is only one mqueue per mount namespace, so current code ends up leaking
the /dev/mqueue from the host into ALL containers. Since SELinux changes the
label of the mqueue, only the last container is able to use the mqueue, all
other containers will get a permission denied. If you don't have SELinux protections
sharing of the /dev/mqueue allows one container to interact in potentially hostile
ways with other containers.
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
After exec driver run, container lock is lost, so we should lock
container when changing its state to `restarting`
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Currently if we exec a restarting container, client will fail silently,
and daemon will print error that container can't be found which is not a
very meaningful prompt to user.
This commit will stop user from exec a restarting container and gives
more explicit error message.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
dockerinit has been around for a very long time. It was originally used
as a way for us to do configuration for LXC containers once the
container had started. LXC is no longer supported, and /.dockerinit has
been dead code for quite a while. This removes all code and references
in code to dockerinit.
Signed-off-by: Aleksa Sarai <asarai@suse.com>
https://github.com/docker/libnetwork/pull/810 provides the more complete
solution for moving the Port-mapping ownership away from endpoint and
into Sandbox. But, this PR makes the best use of existing libnetwork
design and get a step closer to the gaol.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
this prevents the copier from sending messages in the buffer to the closed
driver. If the copied took longer than the timeout to drain the buffer, this
aborts the copier read loop and return back so we can cleanup resources
properly.
Signed-off-by: Daniel Dao <dqminh@cloudflare.com>
This brings in the container-local alias functionality for containers
connected to u ser-defined networks.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Implement configurable detach keys (for `attach`, exec`, `run` and
`start`) using the client-side configuration
- Adds a `--detach-keys` flag to `attach`, `exec`, `run` and `start`
commands.
- Adds a new configuration field (in `~/.docker/config.json`) to
configure the default escape keys for docker client.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
When a container create with -m 100m and then docker update other
cgroup settings such as --cpu-quota, the memory limit show by
docker stats will become the default value but not the 100m.
Signed-off-by: Lei Jitang <leijitang@huawei.com>
It's used for updating properties of one or more containers, we only
support resource configs for now. It can be extended in the future.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
Don't involve code waiting for blocking channel in locked critical
section because it has potential risk of hanging forever.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
- Make the API client library completely standalone.
- Move windows partition isolation detection to the client, so the
driver doesn't use external types.
Signed-off-by: David Calavera <david.calavera@gmail.com>
This restores the behavior that existed prior to #16235 for setting
OOMKilled, while retaining the additional benefits it introduced around
emitting the oom event.
This also adds a test for the most obvious OOM cases which would have
caught this regression.
Fixes#18510
Signed-off-by: Euan <euank@amazon.com>
Allow passing mount propagation option shared, slave, or private as volume
property.
For example.
docker run -ti -v /root/mnt-source:/root/mnt-dest:slave fedora bash
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Container needs to be locked when updating the fields, and
this PR also remove the redundant `parseSecurityOpt` since
it'll be done in `setHostConfig`.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
So other packages don't need to import the daemon package when they
want to use this struct.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Signed-off-by: Tibor Vass <tibor@docker.com>
