This field was added in b18ae8c9cc, which
was part of v1.12.0-rc1 and later, which used image spec v1.2.0.
This patch amends the v1.2 spec to include the missing field.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This field was added in 9db5db1b94, which
was part of v1.10.0-rc1 and later, which used image spec v1.1.0.
It's worth noting that documentation for the v1.1.0 image spec was not
yet available until commit 4fa0eccd10,
which was included in v1.12.0-rc1 and up. The `ArgsEscaped` field was
also adopted by the OCI image spec since [v1.1.0-rc3][1], but considered
deprecated, and not recommended to be used.
This patch amends the v1.1 and v1.2 specifications to describe the field.
[1]: 59780aa569
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This field was added in commit 9f994c9646,
which was merged before the image-spec v1.0.0 was released (which happened
in commit 79910625f0).
This patch backfills the specifications to describe the property.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- remove some trailing commas, which made the JSON invalid (some of these
were fixed in the 1.2 spec, but not in older versions).
- synchronise some formatting / phrasing between versions, to make them
easier to compare.
- remove non-breaking spaces (`NBSP`) in example outputs, and replace
them with regular spaces.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Previous image created a new partially filled image.
This caused child images to lose their parent's layers.
Instead of creating a new object and trying to replace its fields, just
clone the original passed image and change its ID to the manifest
digest.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
The most notable change here is that the OCI's type uses a pointer for `Created`, which we probably should've been too, so most of these changes are accounting for that (and embedding our `Equal` implementation in the one single place it was used).
Signed-off-by: Tianon Gravi <admwiggin@gmail.com>
This makes the output of `docker save` fully OCI compliant.
When using the containerd image store, this code is not used. That
exporter will just use containerd's export method and should give us the
output we want for multi-arch images.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This moves the blobs around so they follow the OCI spec.
Note that because docker reads paths from the manifest.json inside the
tar this is not a breaking change.
This does, however, remove the old layer "VERSION" file which had a big
"why is this even here" in the code comments. I suspect it does not
matter at all even for really old versions of Docker. In any case it is
a useless file for any even relatively modern version of Docker.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This is a squashed version of various PRs (or related code-changes)
to implement image inspect with the containerd-integration;
- add support for image inspect
- introduce GetImageOpts to manage image inspect data in backend
- GetImage to return image tags with details
- list images matching digest to discover all tags
- Add ExposedPorts and Volumes to the image returned
- Refactor resolving/getting images
- Return the image ID on inspect
- consider digest and ignore tag when both are set
- docker run --platform
Signed-off-by: Djordje Lukic <djordje.lukic@docker.com>
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The image store's used are an interface, so there's no guarantee
that implementations don't wrap the errors. Make sure to catch
such cases by using errors.Is.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This code below is run when restoring all images (which can be "many"),
constructing the "logrus.WithFields" is deliberately not "DRY", as the
logger is only used for error-cases, and we don't want to do allocations
if we don't need it. A "f" type-alias was added to make it ever so slightly
more DRY, but that's just for convenience :)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Having this function hides what it's doing, which is just to type-cast
to an image.ID (which is a digest). Using a cast is more transparent,
so deprecating this function in favor of a regular typecast.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This allows differentiating how the detailed data is collected between
the containerd-integration code and the existing implementation.
Signed-off-by: Nicolas De Loof <nicolas.deloof@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Both of these were deprecated in 55f675811a,
but the format of the GoDoc comments didn't follow the correct format, which
caused them not being picked up by tools as "deprecated".
This patch updates uses in the codebase to use the alternatives.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
opencontainers/go-digest is a 1:1 copy of the one in distribution. It's no
longer used in distribution itself, so may be removed there at some point.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
runconfig/config_test.go:23:46: empty-lines: extra empty line at the start of a block (revive)
runconfig/config_test.go:75:55: empty-lines: extra empty line at the start of a block (revive)
oci/devices_linux.go:57:34: empty-lines: extra empty line at the start of a block (revive)
oci/devices_linux.go:60:69: empty-lines: extra empty line at the start of a block (revive)
image/fs_test.go:53:38: empty-lines: extra empty line at the end of a block (revive)
image/tarexport/save.go:88:29: empty-lines: extra empty line at the end of a block (revive)
layer/layer_unix_test.go:21:34: empty-lines: extra empty line at the end of a block (revive)
distribution/xfer/download.go:302:9: empty-lines: extra empty line at the end of a block (revive)
distribution/manifest_test.go:154:99: empty-lines: extra empty line at the end of a block (revive)
distribution/manifest_test.go:329:52: empty-lines: extra empty line at the end of a block (revive)
distribution/manifest_test.go:354:59: empty-lines: extra empty line at the end of a block (revive)
registry/config_test.go:323:42: empty-lines: extra empty line at the end of a block (revive)
registry/config_test.go:350:33: empty-lines: extra empty line at the end of a block (revive)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Make sure we use the same alias everywhere for easier finding,
and to prevent accidentally introducing duplicate imports with
different aliases for the same package.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Migrating these functions to allow them being shared between moby, docker/cli,
and containerd, and to allow using them without importing all of sys / system,
which (in containerd) also depends on hcsshim and more.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
I think this was there for historic reasons (may have been goimports expected
this, and we used to have a linter that wanted it), but it's not needed, so
let's remove it (to make my IDE less complaining about unneeded aliases).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This removes some of the checks that were added in 0cba7740d4,
but should no longer be needed.
- `image/store.Delete()`: no need to validate image platform to delete it.
- `image/tarexporter/takeLayerReference()`: use `image.OperatingSystem()` and
fail early to prevent constructing the `ChainID()`.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The io/ioutil package has been deprecated in Go 1.16. This commit
replaces the existing io/ioutil functions with their new definitions in
io and os packages.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
The LCOW implementation in dockerd has been deprecated in favor of re-implementation
in containerd (in progress). Microsoft started removing the LCOW V1 code from the
build dependencies we use in Microsoft/opengcs (soon to be part of Microsoft/hcshhim),
which means that we need to start removing this code.
This first step removes the lcow graphdriver, the LCOW initialization code, and
some LCOW-related utilities.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
"docker load" validates parent links by comparing image histories, and the
History struct has a time.Time member "Created". Time.UnmarshalJSON can read
RFC3339 timestamps with offset "+00:00", but t.MarshalJSON writes them with
offset "Z". Equivalent times in these two formats are not equal when compared
with the == operator.
This causes checkValidParent to incorrectly return false when the parent image
history contains times using offset "+00:00". In that case the history copied
to the child image will have been converted into "Z" form when marshaled out.
This patch adds an "Equal" method to History, which compares "Created" times
with t.Equal. This is used instead of reflect.DeepEqual in checkValidParent.
Signed-off-by: Rob Cowsill <42620235+rcowsill@users.noreply.github.com>
This commit adds the image variant to the image.(Image) type and
updates related functionality. Images built from another will
inherit the OS, architecture and variant.
Note that if a base image does not specify an architecture, the
local machine's architecture is used for inherited images. On the
other hand, the variant is set equal to the parent image's variant,
even when the parent image's variant is unset.
The legacy builder is also updated to allow the user to specify
a '--platform' argument on the command line when creating an image
FROM scratch. A complete platform specification, including variant,
is supported. The built image will include the variant, as will any
derived images.
Signed-off-by: Chris Price <chris.price@docker.com>
```
image/image.go:65:2: structtag: struct field Parent repeats json tag "parent" also at image.go:39 (govet)
Parent ID `json:"parent,omitempty"`
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Format the source according to latest goimports.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
