This commit adds contrib/integration-cli-on-swarm/integration-cli-on-swarm.sh,
which enables IT to be running in parallel, using Swarm-mode and Funker.
Please refer to contrib/integration-cli-on-swarm/README.md
The test takes almost 5 to 6 minutes, with 10 n1-standard-4 GCE instances.
$ ./contrib/integration-cli-on-swarm/integration-cli-on-swarm.sh --push-worker-image example.gcr.io/foo/bar --replicas 30 --shuffle
2016/12/29 08:32:15 Loaded 1618 tests (30 chunks)
2016/12/29 08:32:15 Executing 30 chunks in parallel, against "integration-cli-worker"
2016/12/29 08:32:15 Executing chunk 0 (contains 54 test filters)
..
2016/12/29 08:34:34 Finished chunk 28 [1/30] with 54 test filters in 2m19.098068003s, code=0.
2016/12/29 08:34:38 Finished chunk 12 [2/30] with 54 test filters in 2m23.088569511s, code=0.
2016/12/29 08:34:48 Finished chunk 10 [3/30] with 54 test filters in 2m33.880679079s, code=0.
2016/12/29 08:34:54 Finished chunk 20 [4/30] with 54 test filters in 2m39.973747028s, code=0.
2016/12/29 08:35:11 Finished chunk 18 [5/30] with 54 test filters in 2m56.28384361s, code=0.
2016/12/29 08:35:11 Finished chunk 29 [6/30] with 52 test filters in 2m56.54047088s, code=0.
2016/12/29 08:35:15 Finished chunk 1 [7/30] with 54 test filters in 3m0.285044426s, code=0.
2016/12/29 08:35:22 Finished chunk 6 [8/30] with 54 test filters in 3m7.211775338s, code=0.
2016/12/29 08:35:24 Finished chunk 25 [9/30] with 54 test filters in 3m9.938413009s, code=0.
2016/12/29 08:35:30 Finished chunk 27 [10/30] with 54 test filters in 3m15.219834368s, code=0.
2016/12/29 08:35:36 Finished chunk 9 [11/30] with 54 test filters in 3m21.615434162s, code=0.
2016/12/29 08:35:41 Finished chunk 13 [12/30] with 54 test filters in 3m26.576907401s, code=0.
2016/12/29 08:35:45 Finished chunk 17 [13/30] with 54 test filters in 3m30.290752537s, code=0.
2016/12/29 08:35:53 Finished chunk 2 [14/30] with 54 test filters in 3m38.148423321s, code=0.
2016/12/29 08:35:55 Finished chunk 24 [15/30] with 54 test filters in 3m40.09669137s, code=0.
2016/12/29 08:35:57 Finished chunk 8 [16/30] with 54 test filters in 3m42.299945108s, code=0.
2016/12/29 08:35:57 Finished chunk 22 [17/30] with 54 test filters in 3m42.946558809s, code=0.
2016/12/29 08:35:59 Finished chunk 23 [18/30] with 54 test filters in 3m44.232557165s, code=0.
2016/12/29 08:36:02 Finished chunk 3 [19/30] with 54 test filters in 3m47.112051358s, code=0.
2016/12/29 08:36:11 Finished chunk 15 [20/30] with 54 test filters in 3m56.340656645s, code=0.
2016/12/29 08:36:11 Finished chunk 11 [21/30] with 54 test filters in 3m56.882401231s, code=0.
2016/12/29 08:36:22 Finished chunk 19 [22/30] with 54 test filters in 4m7.551093516s, code=0.
2016/12/29 08:36:23 Finished chunk 21 [23/30] with 54 test filters in 4m8.221093446s, code=0.
2016/12/29 08:36:25 Finished chunk 16 [24/30] with 54 test filters in 4m10.450451705s, code=0.
2016/12/29 08:36:27 Finished chunk 5 [25/30] with 54 test filters in 4m12.162272692s, code=0.
2016/12/29 08:36:28 Finished chunk 14 [26/30] with 54 test filters in 4m13.977801031s, code=0.
2016/12/29 08:36:29 Finished chunk 0 [27/30] with 54 test filters in 4m14.34086812s, code=0.
2016/12/29 08:36:49 Finished chunk 26 [28/30] with 54 test filters in 4m34.437085539s, code=0.
2016/12/29 08:37:14 Finished chunk 7 [29/30] with 54 test filters in 4m59.22902721s, code=0.
2016/12/29 08:37:20 Finished chunk 4 [30/30] with 54 test filters in 5m5.103469214s, code=0.
2016/12/29 08:37:20 Executed 30 chunks in 5m5.104379119s. PASS: 30, FAIL: 0.
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
- export DOCKER_GITCOMMIT in the Makefile
- prioritize DOCKER_GITCOMMIT against the `git` command in
`./hack/make.sh`
- Also add `integration-cli/bundles` to gitignore (it's generated when
using integration-cli shell)
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
By using `make CONTAINER_NAME=docker-dev shell` you're able to name
the docker-dev container to what you want. The idea behind it is by
knowing the name of your dev container you can automate easily some
thing using `docker exec` later.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Much easier than the previous method of copying over to the docs
repository and generating the docs.
And, as @cpuguy83 pointed out, that actually didn't work
because the PR that adds Swagger docs isn't merged yet. Oopsy.
Signed-off-by: Ben Firshman <ben@firshman.co.uk>
Changes the default when incremental build is enabled to use named
volumes instead of bindmounts.
The reason for this is, on Mac/Windows the bind mounts will go over the
shared fs, which is incredibly slow and itself uses lots of CPU.
Makes an incremental build on OSX go from ~40s to 10s.
To get the old behavior, can set `PKGCACHE_DIR=.go-pkg-cache`
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This make it more consistent with the other image builds and allow to
build manpages behind a proxy for example.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
This pins the version of go-swagger used, because
the results generated by different versions
can differ quite a bit (tested between 0.7.2 - 0.7.4),
and can cause CI / validation to fail.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This speeds up docker build time drastically. It still possible to
disable this by setting `DOCKER_INCREMENTAL_BUILD` to `0` (and this is
what should be done on the CI).
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Allow each script to run directly without the hack/make.sh wrapper. These
scripts do not produce artifacts and do not benefit from the "bundles"
framework.
Signed-off-by: Daniel Nephin <dnephin@docker.com>
The bundles dir used to be automatically made a volume if BINDDIR was
not set.
The `PKGCACHE_*` stuff was added recently which gets added to
`DOCKER_MOUNT`. This breaks the case where someone wants to use the
package cache (DOCKER_INCREMENTAL_BINARY is enabled) but has not
specified a bind dir but needs the bundles dir made a volume.
Moves the package cache handling to after the bundles dir is made a
volume.
Before this patch, if you have `DOCKER_GRAPHDRIVER` set to anything
other than vfs, the tests in the daemon suite (and swarm suite, and
registry suite) will fail to run since they cannot startup a daemon
(except for speicifc cases where <driver> over <driver> is possible,
like devmapper).
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Passses down BUILD_APT_MIRROR to the docker env.
Ensures BUILD_APT_MIRROR is used when building debs, but only when the
consuming `Dockerfile` actually uses it, otherwise it will cause the
build to fail (e.g. on Ubuntu builds we aren't using APT_MIRROR).
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Adds a new bundle `verify-integration-tests` which pre-compiles a test
binary for the integration tests.
This makes sure that the integration tests will actually compile before
doing other tasks which take much longer, such as building dockerd and
loading test fixtures.
When it comes time to actually run the tests, the pre-compiled binary
will be used so it doesn't have to compile the tests a 2nd time.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
DOCKER_BUILD_APT_MIRROR
This allows passthrough of other options like HTTP_PROXY from
DOCKER_BUILD_ARGS to work on all builds (for example,
ensure-syscall-test) when APT_MIRROR is set.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
When running a `make manpages` the image `docker-manpage-dev` will be build and started to create
the man pages. But the container will not be deleted afterwards. So I propose to start it with
`docker run --rm ...`, otherwise we'll collect some trash.
```
$ docker ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
e3d9f721d862 docker-manpage-dev "man/generate.sh" 19 minutes ago Exited (0) 16 minutes ago berserk_jang
5738a23fb682 docker-manpage-dev "man/generate.sh" 9 hours ago Exited (0) 9 hours ago boring_bartik
15490b5e63f7 docker-manpage-dev "man/generate.sh" 10 hours ago Exited (0) 10 hours ago lonely_joliot
```
Signed-off-by: Dieter Reuter <dieter.reuter@me.com>
`make run` allows you to fire up a daemon (in a container) just using
the existing built binaries. This allows for more rapid iteration
instead of dealing with firing up a shell just to start the daemon.
By default the daemon will listen on port 2375 on the default network
interface.
If a port forward is required to access the daemon, the user can set
`make DOCKER_PORT=2375 run` to get a port forward on a random port with
the daemon listening on port 2375, or `make DOCKER_PORT=2375:2375 run`
to get a daemon running with port 2375 forwarded to the daemon running
on 2375.
Note that the daemon is automatically configured to listen on whatever
port is set for the container side of the `DOCKER_PORT` port spec.
When running on docker4mac, the user must do the following:
```
$ make BINDDIR=. DOCKER_PORT=2375 run
```
This makes sure the binaries are loaded in the container and a port is
forwarded, since it is currently impossible to route traffic from the
mac directly to a container IP.
To get a fresh binary:
```
$ make BINDDIR=. DOCKER_PORT=2375 binary run
```
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This installs docker and dockerd to `$DOCKER_MAKE_INSTALL_PREFIX/bin`, which
defaults to `/usr/local/bin`
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Add a proxy to support 'docker daemon'
Fix configFile option, and remove a test that is no longer relevant.
Remove daemon build tag.
Remove DOCKER_CLIENTONLY from build scripts.
Signed-off-by: Daniel Nephin <dnephin@docker.com>
Change docker-daemon to dockerd.
Signed-off-by: Daniel Nephin <dnephin@docker.com>
