I noticed I made a mistake in the first ping ("before swarm init"), which
was not specifying the daemon's socket path and because of that testing
against the main integration daemon (not the locally spun up daemon).
While fixing that, I wondered why the test didn't actually use the client
for the requests (to also verify the client converted the response), so
I rewrote the test to use `client.Ping()` and to verify the ping response
has the expected values set.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These HostConfig properties were not validated until the OCI spec for the container
was created, which meant that `container run` and `docker create` would accept
invalid values, and the invalid value would not be detected until `start` was
called, returning a 500 "internal server error", as well as errors from containerd
("cleanup: failed to delete container from containerd: no such container") in the
daemon logs.
As a result, a faulty container was created, and the container state remained
in the `created` state.
This patch:
- Updates `oci.WithNamespaces()` to return the correct `errdefs.InvalidParameter`
- Updates `verifyPlatformContainerSettings()` to validate these settings, so that
an error is returned when _creating_ the container.
Before this patch:
docker run -dit --ipc=shared --name foo busybox
2a00d74e9fbb7960c4718def8f6c74fa8ee754030eeb93ee26a516e27d4d029f
docker: Error response from daemon: Invalid IPC mode: shared.
docker ps -a --filter name=foo
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
2a00d74e9fbb busybox "sh" About a minute ago Created foo
After this patch:
docker run -dit --ipc=shared --name foo busybox
docker: Error response from daemon: invalid IPC mode: shared.
docker ps -a --filter name=foo
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
An integration test was added to verify the new validation, which can be run with:
make BIND_DIR=. TEST_FILTER=TestCreateInvalidHostConfig DOCKER_GRAPHDRIVER=vfs test-integration
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
On Linux the daemon was not respecting the HostConfig.ConsoleSize
property and relied on cli initializing the tty size after the container
was created. This caused a delay between container creation and
the tty actually being resized.
This is also a small change to the api description, because
HostConfig.ConsoleSize is no longer Windows-only.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
This change is in preparation of deprecating support for old manifests.
Currently the daemon's ID is based on the trust-key ID, which will be
removed once we fully deprecate support for old manifests (the trust
key is currently only used in tests).
This patch:
- looks if a trust-key is present; if so, it migrates the trust-key
ID to the new "engine-id" file within the daemon's root.
- if no trust-key is present (so in case it's a "fresh" install), we
generate a UUID instead and use that as ID.
The migration is to prevent engines from getting a new ID on upgrades;
while we don't provide any guarantees on the engine's ID, users may
expect the ID to be "stable" (not change) between upgrades.
A test has been added, which can be ran with;
make DOCKER_GRAPHDRIVER=vfs TEST_FILTER='TestConfigDaemonID' test-integration
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This was added in 93c3e6c91e, at which time only
some basic handling of non-succesful status codes was present;
93c3e6c91e/api/client/utils.go (L112-L121)
Given that since 38e6d474af non-successful status-
codes are already handled, and a 204 ("no content") status should not be an error,
this special case should no longer be needed.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Implement similar logic as is used in httputils.ReadJSON(). Before
this patch, endpoints using the ContainerDecoder would incorrectly
return a 500 (internal server error) status.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Implement a ReadJSON() utility to help reduce some code-duplication,
and to make sure we handle JSON requests consistently (e.g. always
check for the content-type).
Differences compared to current handling:
- prevent possible panic if request.Body is nil ("should never happen")
- always require Content-Type to be "application/json"
- be stricter about additional content after JSON (previously ignored)
- but, allow the body to be empty (an empty body is not invalid);
update TestContainerInvalidJSON accordingly, which was testing the
wrong expectation.
- close body after reading (some code did this)
We should consider to add a "max body size" on this function, similar to
7b9275c0da/api/server/middleware/debug.go (L27-L40)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This is a follow-up to 427c7cc5f8, which added
proxy-configuration options ("http-proxy", "https-proxy", "no-proxy") to the
dockerd cli and in `daemon.json`.
While working on documentation changes for this feature, I realised that those
options won't be "next" to each-other when formatting the daemon.json JSON, for
example using `jq` (which sorts the fields alphabetically). As it's possible that
additional proxy configuration options are added in future, I considered that
grouping these options in a struct within the JSON may help setting these options,
as well as discovering related options.
This patch introduces a "proxies" field in the JSON, which includes the
"http-proxy", "https-proxy", "no-proxy" options.
Conflict detection continues to work as before; with this patch applied:
mkdir -p /etc/docker/
echo '{"proxies":{"http-proxy":"http-config", "https-proxy":"https-config", "no-proxy": "no-proxy-config"}}' > /etc/docker/daemon.json
dockerd --http-proxy=http-flag --https-proxy=https-flag --no-proxy=no-proxy-flag --validate
unable to configure the Docker daemon with file /etc/docker/daemon.json:
the following directives are specified both as a flag and in the configuration file:
http-proxy: (from flag: http-flag, from file: http-config),
https-proxy: (from flag: https-flag, from file: https-config),
no-proxy: (from flag: no-proxy-flag, from file: no-proxy-config)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Arbitrary here does not include '', best to catch that one early as it's
almost certainly a mistake (possibly an attempt to pass a POSIX path
through this API)
Signed-off-by: Paul "TBBle" Hampson <Paul.Hampson@Pobox.com>
Since this function is about to get more complicated, and change
behaviour, this establishes tests for the existing implementation.
Signed-off-by: Paul "TBBle" Hampson <Paul.Hampson@Pobox.com>
This adds an additional "Swarm" header to the _ping endpoint response,
which allows a client to detect if Swarm is enabled on the daemon, without
having to call additional endpoints.
This change is not versioned in the API, and will be returned irregardless
of the API version that is used. Clients should fall back to using other
endpoints to get this information if the header is not present.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The wrapResponseError() utility converted some specific errors, but in
doing so, could hide the actual error message returned by the daemon.
In addition, starting with 38e6d474af,
HTTP status codes were already mapped to their corresponding errdefs
types on the client-side, making this conversion redundant.
This patch removes the wrapResponseError() utility; it's worth noting
that some error-messages will change slightly (as they now return the
error as returned by the daemon), but may cointain more details as
before, and in some cases prevents hiding the actual error.
Before this change:
docker container rm nosuchcontainer
Error: No such container: nosuchcontainer
docker container cp mycontainer:/no/such/path .
Error: No such container:path: mycontainer:/no/such/path
docker container cp ./Dockerfile mycontainer:/no/such/path
Error: No such container:path: mycontainer:/no/such
docker image rm nosuchimage
Error: No such image: nosuchimage
docker network rm nosuchnetwork
Error: No such network: nosuchnetwork
docker volume rm nosuchvolume
Error: No such volume: nosuchvolume
docker plugin rm nosuchplugin
Error: No such plugin: nosuchplugin
docker checkpoint rm nosuchcontainer nosuchcheckpoint
Error response from daemon: No such container: nosuchcontainer
docker checkpoint rm mycontainer nosuchcheckpoint
Error response from daemon: checkpoint nosuchcheckpoint does not exist for container mycontainer
docker service rm nosuchservice
Error: No such service: nosuchservice
docker node rm nosuchnode
Error: No such node: nosuchnode
docker config rm nosuschconfig
Error: No such config: nosuschconfig
docker secret rm nosuchsecret
Error: No such secret: nosuchsecret
After this change:
docker container rm nosuchcontainer
Error response from daemon: No such container: nosuchcontainer
docker container cp mycontainer:/no/such/path .
Error response from daemon: Could not find the file /no/such/path in container mycontainer
docker container cp ./Dockerfile mycontainer:/no/such/path
Error response from daemon: Could not find the file /no/such in container mycontainer
docker image rm nosuchimage
Error response from daemon: No such image: nosuchimage:latest
docker network rm nosuchnetwork
Error response from daemon: network nosuchnetwork not found
docker volume rm nosuchvolume
Error response from daemon: get nosuchvolume: no such volume
docker plugin rm nosuchplugin
Error response from daemon: plugin "nosuchplugin" not found
docker checkpoint rm nosuchcontainer nosuchcheckpoint
Error response from daemon: No such container: nosuchcontainer
docker checkpoint rm mycontainer nosuchcheckpoint
Error response from daemon: checkpoint nosuchcheckpoint does not exist for container mycontainer
docker service rm nosuchservice
Error response from daemon: service nosuchservice not found
docker node rm nosuchnode
Error response from daemon: node nosuchnode not found
docker config rm nosuchconfig
Error response from daemon: config nosuchconfig not found
docker secret rm nosuchsecret
Error response from daemon: secret nosuchsecret not found
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Finish the refactor which was partially completed with commit
34536c498d, passing around IdentityMapping structs instead of pairs of
[]IDMap slices.
Existing code which uses []IDMap relies on zero-valued fields to be
valid, empty mappings. So in order to successfully finish the
refactoring without introducing bugs, their replacement therefore also
needs to have a useful zero value which represents an empty mapping.
Change IdentityMapping to be a pass-by-value type so that there are no
nil pointers to worry about.
The functionality provided by the deprecated NewIDMappingsFromMaps
function is required by unit tests to to construct arbitrary
IdentityMapping values. And the daemon will always need to access the
mappings to pass them to the Linux kernel. Accommodate these use cases
by exporting the struct fields instead. BuildKit currently depends on
the UIDs and GIDs methods so we cannot get rid of them yet.
Signed-off-by: Cory Snider <csnider@mirantis.com>
This is more in line with other consts that are used for defaults, and makes it
slightly easier to consume than DefaultV2Registry, e.g. see:
https://github.com/oras-project/oras-go/blob/v1.1.0/pkg/auth/docker/resolver.go#L81-L84
Note that both the "index.docker.io" and "registry-1.docker.io" domains
are here for historic reasons and backward-compatibility. These domains
are still supported by Docker Hub (and will continue to be supported), but
there are new domains already in use, and plans to consolidate all legacy
domains to new "canonical" domains. Once those domains are decided on, we
should update these consts (but making sure to preserve compatibility with
existing installs, clients, and user configuration).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This was added in commits fc21bf280b and
0380fbff37 in support of LCOW, but was
now always set to runtime.GOOS.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Commit 0380fbff37 added the ability to pass a
--platform flag on `docker import` when importing an archive. The intent
of that commit was to allow importing a Linux rootfs on a Windows daemon
(as part of the experimental LCOW feature).
A later commit (337ba71fc1) changed some
of this code to take both OS and Architecture into account (for `docker build`
and `docker pull`), but did not yet update the `docker image import`.
This patch updates the import endpoitn to allow passing both OS and
Architecture. Note that currently only matching OSes are accepted,
and an error will be produced when (e.g.) specifying `linux` on Windows
and vice-versa.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This test is failing frequently once nodes have less disk space
available. Skipping the test for now, but we can continue looking
for a good solution.
Tracked through https://github.com/moby/moby/issues/42743
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This should help with Jenkins failing to clean up the Workspace:
- make sure "cleanup" is also called in the defer for all daemons. keeping
the daemon's storage around prevented Jenkins from cleaning up.
- close client connections and some readers (just to be sure)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The daemon can print the proxy configuration as part of error-messages,
and when reloading the daemon configuration (SIGHUP). Make sure that
the configuration is sanitized before printing.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The proxy configuration works, but looks like we're unable to connect to the
test proxy server as part of our test;
level=debug msg="Trying to pull example.org:5000/some/image from https://example.org:5000 v2"
level=warning msg="Error getting v2 registry: Get \"https://example.org:5000/v2/\": proxyconnect tcp: dial tcp 127.0.0.1:45999: connect: connection refused"
level=info msg="Attempting next endpoint for pull after error: Get \"https://example.org:5000/v2/\": proxyconnect tcp: dial tcp 127.0.0.1:45999: connect: connection refused"
level=error msg="Handler for POST /v1.42/images/create returned error: Get \"https://example.org:5000/v2/\": proxyconnect tcp: dial tcp 127.0.0.1:45999: connect: connection refused"
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This allows configuring the daemon's proxy server through the daemon.json con-
figuration file or command-line flags configuration file, in addition to the
existing option (through environment variables).
Configuring environment variables on Windows to configure a service is more
complicated than on Linux, and adding alternatives for this to the daemon con-
figuration makes the configuration more transparent and easier to use.
The configuration as set through command-line flags or through the daemon.json
configuration file takes precedence over env-vars in the daemon's environment,
which allows the daemon to use a different proxy. If both command-line flags
and a daemon.json configuration option is set, an error is produced when starting
the daemon.
Note that this configuration is not "live reloadable" due to Golang's use of
`sync.Once()` for proxy configuration, which means that changing the proxy
configuration requires a restart of the daemon (reload / SIGHUP will not update
the configuration.
With this patch:
cat /etc/docker/daemon.json
{
"http-proxy": "http://proxytest.example.com:80",
"https-proxy": "https://proxytest.example.com:443"
}
docker pull busybox
Using default tag: latest
Error response from daemon: Get "https://registry-1.docker.io/v2/": proxyconnect tcp: dial tcp: lookup proxytest.example.com on 127.0.0.11:53: no such host
docker build .
Sending build context to Docker daemon 89.28MB
Step 1/3 : FROM golang:1.16-alpine AS base
Get "https://registry-1.docker.io/v2/": proxyconnect tcp: dial tcp: lookup proxytest.example.com on 127.0.0.11:53: no such host
Integration tests were added to test the behavior:
- verify that the configuration through all means are used (env-var,
command-line flags, damon.json), and used in the expected order of
preference.
- verify that conflicting options produce an error.
Signed-off-by: Anca Iordache <anca.iordache@docker.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Looks like this test was broken from the start, and fully relied on a race
condition. (Test was added in 65ee7fff02)
The problem is in the service's command: `ls -l /etc/config || /bin/top`, which
will either:
- exit immediately if the secret is mounted correctly at `/etc/config` (which it should)
- keep running with `/bin/top` if the above failed
After the service is created, the test enters a race-condition, checking for 1
task to be running (which it ocassionally is), after which it proceeds, and looks
up the list of tasks of the service, to get the log output of `ls -l /etc/config`.
This is another race: first of all, the original filter for that task lookup did
not filter by `running`, so it would pick "any" task of the service (either failed,
running, or "completed" (successfully exited) tasks).
In the meantime though, SwarmKit kept reconciling the service, and creating new
tasks, so even if the test was able to get the ID of the correct task, that task
may already have been exited, and removed (task-limit is 5 by default), so only
if the test was "lucky", it would be able to get the logs, but of course, chances
were likely that it would be "too late", and the task already gone.
The problem can be easily reproduced when running the steps manually:
echo 'CONFIG' | docker config create myconfig -
docker service create --config source=myconfig,target=/etc/config,mode=0777 --name myservice busybox sh -c 'ls -l /etc/config || /bin/top'
The above creates the service, but it keeps retrying, because each task exits
immediately (followed by SwarmKit reconciling and starting a new task);
mjntpfkkyuuc1dpay4h00c4oo
overall progress: 0 out of 1 tasks
1/1: ready [======================================> ]
verify: Detected task failure
^COperation continuing in background.
Use `docker service ps mjntpfkkyuuc1dpay4h00c4oo` to check progress.
And checking the tasks for the service reveals that tasks exit cleanly (no error),
but _do exit_, so swarm just keeps up reconciling, and spinning up new tasks;
docker service ps myservice --no-trunc
ID NAME IMAGE NODE DESIRED STATE CURRENT STATE ERROR PORTS
2wmcuv4vffnet8nybg3he4v9n myservice.1 busybox:latest@sha256:f7ca5a32c10d51aeda3b4d01c61c6061f497893d7f6628b92f822f7117182a57 docker-desktop Ready Ready less than a second ago
5p8b006uec125iq2892lxay64 \_ myservice.1 busybox:latest@sha256:f7ca5a32c10d51aeda3b4d01c61c6061f497893d7f6628b92f822f7117182a57 docker-desktop Shutdown Complete less than a second ago
k8lpsvlak4b3nil0zfkexw61p \_ myservice.1 busybox:latest@sha256:f7ca5a32c10d51aeda3b4d01c61c6061f497893d7f6628b92f822f7117182a57 docker-desktop Shutdown Complete 6 seconds ago
vsunl5pi7e2n9ol3p89kvj6pn \_ myservice.1 busybox:latest@sha256:f7ca5a32c10d51aeda3b4d01c61c6061f497893d7f6628b92f822f7117182a57 docker-desktop Shutdown Complete 11 seconds ago
orxl8b6kt2l6dfznzzd4lij4s \_ myservice.1 busybox:latest@sha256:f7ca5a32c10d51aeda3b4d01c61c6061f497893d7f6628b92f822f7117182a57 docker-desktop Shutdown Complete 17 seconds ago
This patch changes the service's command to `sleep`, so that a successful task
(after successfully performing `ls -l /etc/config`) continues to be running until
the service is deleted. With that change, the service should (usually) reconcile
immediately, which removes the race condition, and should also make it faster :)
This patch changes the tests to use client.ServiceLogs() instead of using the
service's tasklist to directly access container logs. This should also fix some
failures that happened if some tasks failed to start before reconciling, in which
case client.TaskList() (with the current filters), could return more tasks than
anticipated (as it also contained the exited tasks);
=== RUN TestCreateServiceSecretFileMode
create_test.go:291: assertion failed: 2 (int) != 1 (int)
--- FAIL: TestCreateServiceSecretFileMode (7.88s)
=== RUN TestCreateServiceConfigFileMode
create_test.go:355: assertion failed: 2 (int) != 1 (int)
--- FAIL: TestCreateServiceConfigFileMode (7.87s)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Before this change if you assume that things work the way the test
expects them to (it does not, but lets assume for now) we aren't really
testing anything because we are testing that a container is healthy
before and after we send a signal. This will give false positives even
if there is a bug in the underlying code. Sending a signal can take any
amount of time to cause a container to exit or to trigger healthchecks
to stop or whatever.
Now lets remove the assumption that things are working as expected,
because they are not.
In this case, `top` (which is what is running in the container) is
actually exiting when it receives `USR1`.
This totally invalidates the test.
We need more control and knowledge as to what is happening in the
container to properly test this.
This change introduces a custom script which traps `USR1` and flips the
health status each time the signal is received.
We then send the signal twice so that we know the change has occurred
and check that the value has flipped so that we know the change has
actually occurred.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Commit dae652e2e5 added support for non-privileged
containers to use ICMP_PROTO (used for `ping`). This option cannot be set for
containers that have user-namespaces enabled.
However, the detection looks to be incorrect; HostConfig.UsernsMode was added
in 6993e891d1 / ee2183881b,
and the property only has meaning if the daemon is running with user namespaces
enabled. In other situations, the property has no meaning.
As a result of the above, the sysctl would only be set for containers running
with UsernsMode=host on a daemon running with user-namespaces enabled.
This patch adds a check if the daemon has user-namespaces enabled (RemappedRoot
having a non-empty value), or if the daemon is running inside a user namespace
(e.g. rootless mode) to fix the detection.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The io/ioutil package has been deprecated in Go 1.16. This commit
replaces the existing io/ioutil functions with their new definitions in
io and os packages.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Update the frozen images to also be based on Debian bullseye. Using the "slim"
variant (which looks to have all we're currently using), and remove the
buildpack-dep frozen image.
The buildpack-dep image is quite large, and it looks like we only use it to
compile some C binaries, which should work fine on a regular debian image;
docker build -t debian:bullseye-slim-gcc -<<EOF
FROM debian:bullseye-slim
RUN apt-get update && apt-get install -y gcc libc6-dev --no-install-recommends
EOF
docker image ls
REPOSITORY TAG IMAGE ID CREATED SIZE
debian bullseye-slim-gcc 1851750242af About a minute ago 255MB
buildpack-deps bullseye fe8fece98de2 2 days ago 834MB
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Otherwise errors within this function will all show to be at the line
number of the utility, instead of where it failed in the test:
=== RUN TestDaemonDefaultNetworkPools
service_test.go:23: assertion failed:
Command: ip link delete docker0
ExitCode: 127
Error: exec: "ip": executable file not found in $PATH
Stdout:
Stderr:
Failures:
ExitCode was 127 expected 0
Expected no error
=== RUN TestDaemonRestartWithExistingNetwork
service_test.go:23: assertion failed:
Command: ip link delete docker0
ExitCode: 127
Error: exec: "ip": executable file not found in $PATH
Stdout:
Stderr:
Failures:
ExitCode was 127 expected 0
Expected no error
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
