ReleaseRWLayer can and should only be called once (unless it returns
an error), but might be called twice in case of a failure from
`system.EnsureRemoveAll(container.Root)`. This results in the
following error:
> Error response from daemon: driver "XXX" failed to remove root filesystem for YYY: layer not retained
The obvious fix is to set container.RWLayer to nil as soon as
ReleaseRWLayer() succeeds.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Signed-off-by: John Howard <jhoward@microsoft.com>
The re-coalesces the daemon stores which were split as part of the
original LCOW implementation.
This is part of the work discussed in https://github.com/moby/moby/issues/34617,
in particular see the document linked to in that issue.
Instead of having to create a bunch of custom error types that are doing
nothing but wrapping another error in sub-packages, use a common helper
to create errors of the requested type.
e.g. instead of re-implementing this over and over:
```go
type notFoundError struct {
cause error
}
func(e notFoundError) Error() string {
return e.cause.Error()
}
func(e notFoundError) NotFound() {}
func(e notFoundError) Cause() error {
return e.cause
}
```
Packages can instead just do:
```
errdefs.NotFound(err)
```
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Currently, if a container removal has failed for some reason,
any client waiting for removal (e.g. `docker run --rm`) is
stuck, waiting for removal to succeed while it has failed already.
For more details and the reproducer, please check
https://github.com/moby/moby/issues/34945
This commit addresses that by allowing `ContainerWait()` with
`container.WaitCondition == "removed"` argument to return an
error in case of removal failure. The `ContainerWaitOKBody`
stucture returned to a client is amended with a pointer to `struct Error`,
containing an error message string, and the `Client.ContainerWait()`
is modified to return the error, if any, to the client.
Note that this feature is only available for API version >= 1.34.
In order for the old clients to be unstuck, we just close the connection
without writing anything -- this causes client's error.
Now, docker-cli would need a separate commit to bump the API to 1.34
and to show an error returned, if any.
[v2: recreate the waitRemove channel after closing]
[v3: document; keep legacy behavior for older clients]
[v4: convert Error from string to pointer to a struct]
[v5: don't emulate old behavior, send empty response in error case]
[v6: rename legacy* vars to include version suffix]
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
- Call the function that create an event entry while volumes are
pruning.
- Pass volume.Volume type on volumeRm instead of a name. Volume lookup is done
on the exported VolumeRm function.
- Skip volume deletion when force option used and it does not exists.
Signed-off-by: Nicolas Sterchele <sterchele.nicolas@gmail.com>
Signed-off-by: John Howard <jhoward@microsoft.com>
This PR has the API changes described in https://github.com/moby/moby/issues/34617.
Specifically, it adds an HTTP header "X-Requested-Platform" which is a JSON-encoded
OCI Image-spec `Platform` structure.
In addition, it renames (almost all) uses of a string variable platform (and associated)
methods/functions to os. This makes it much clearer to disambiguate with the swarm
"platform" which is really os/arch. This is a stepping stone to getting the daemon towards
fully multi-platform/arch-aware, and makes it clear when "operating system" is being
referred to rather than "platform" which is misleadingly used - sometimes in the swarm
meaning, but more often as just the operating system.
Use strongly typed errors to set HTTP status codes.
Error interfaces are defined in the api/errors package and errors
returned from controllers are checked against these interfaces.
Errors can be wraeped in a pkg/errors.Causer, as long as somewhere in the
line of causes one of the interfaces is implemented. The special error
interfaces take precedence over Causer, meaning if both Causer and one
of the new error interfaces are implemented, the Causer is not
traversed.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Specifically, none of the graphdrivers are supposed to return a
not-exist type of error on remove (or at least that's how they are
currently handled).
Found that AUFS still had one case where a not-exist error could escape,
when checking if the directory is mounted we call a `Statfs` on the
path.
This fixes AUFS to not return an error in this case, but also
double-checks at the daemon level on layer remove that the error is not
a `not-exist` type of error.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Steps to reproduce:
```
# docker run -tid --name aaa ubuntu
57bfd00ac5559f72eec8c1b32a01fe38427d66687940f74611e65137414f0ada
# docker run -tid --name bbb --link aaa ubuntu
23ad18362950f39b638206ab4d1885fd4f50cbd1d16aac9cab8e97e0c8363471
# docker ps --no-trunc
CONTAINER ID IMAGE
COMMAND CREATED STATUS PORTS
NAMES
23ad18362950f39b638206ab4d1885fd4f50cbd1d16aac9cab8e97e0c8363471
ubuntu "/bin/bash" 4 seconds ago Up 3 seconds
bbb
57bfd00ac5559f72eec8c1b32a01fe38427d66687940f74611e65137414f0ada
ubuntu "/bin/bash" 14 seconds ago Up 14
seconds aaa,bbb/aaa
# docker rm -f bbb
bbb
# docker ps --no-trunc
CONTAINER ID IMAGE
COMMAND CREATED STATUS PORTS
NAMES
57bfd00ac5559f72eec8c1b32a01fe38427d66687940f74611e65137414f0ada
ubuntu "/bin/bash" 29 seconds ago Up 28
seconds aaa,bbb/aaa
# docker rm --link bbb/aaa
Error response from daemon: Cannot get parent /bbb for name /bbb/aaa
```
When we rm container `bbb`, we can still see `bbb/aaa` in `docker ps
--no-trunc`. And this link cannot be deleted since container `bbb` has
already been removed.
We should remove links of a container when it is deleted.
Signed-off-by: Yuanhong Peng <pengyuanhong@huawei.com>
Currently, names are maintained by a separate system called "registrar".
This means there is no way to atomically snapshot the state of
containers and the names associated with them.
We can add this atomicity and simplify the code by storing name
associations in the memdb. This removes the need for pkg/registrar, and
makes snapshots a lot less expensive because they no longer need to copy
all the names. This change also avoids some problematic behavior from
pkg/registrar where it returns slices which may be modified later on.
Note that while this change makes the *snapshotting* atomic, it doesn't
yet do anything to make sure containers are named at the same time that
they are added to the database. We can do that by adding a transactional
interface, either as a followup, or as part of this PR.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Reuse existing structures and rely on json serialization to deep copy
Container objects.
Also consolidate all "save" operations on container.CheckpointTo, which
now both saves a serialized json to disk, and replicates state to the
ACID in-memory store.
Signed-off-by: Fabio Kung <fabio.kung@gmail.com>
Replicate relevant mutations to the in-memory ACID store. Readers will
then be able to query container state without locking.
Signed-off-by: Fabio Kung <fabio.kung@gmail.com>
This patch consolidates the two WaitStop and WaitWithContext methods
on the container.State type. Now there is a single method, Wait, which
takes a context and a bool specifying whether to wait for not just a
container exit but also removal.
The behavior has been changed slightly so that a wait call during a
Created state will not return immediately but instead wait for the
container to be started and then exited.
The interface has been changed to no longer block, but instead returns
a channel on which the caller can receive a *StateStatus value which
indicates the ExitCode or an error if there was one (like a context
timeout or state transition error).
These changes have been propagated through the rest of the deamon to
preserve all other existing behavior.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Before this, if `forceRemove` is set the container data will be removed
no matter what, including if there are issues with removing container
on-disk state (rw layer, container root).
In practice this causes a lot of issues with leaked data sitting on
disk that users are not able to clean up themselves.
This is particularly a problem while the `EBUSY` errors on remove are so
prevalent. So for now let's not keep this behavior.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Container state counts are used for reporting in the `/info` endpoint.
Currently when `/info` is called, each container is iterated over and
the containers 'StateString()' is called. This is not very efficient
with lots of containers, and is also racey since `StateString()` is not
using a mutex and the mutex is not otherwise locked.
We could just lock the container mutex, but this is proven to be
problematic since there are frequent deadlock scenarios and we should
always have the `/info` endpoint available since this endpoint is used
to get general information about the docker host.
Really, these metrics on `/info` should be deprecated. But until then,
we can just keep a running tally in memory for each of the reported
states.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Running the rm command on a paused/restarting container
will give an error message saying the container is running
which is incorrect.
To fix that, the error message will have the correct
container state and a procedure to remove it accordingly.
Notice: docker-py was bumped to:
4a08d04aef0595322e1b5ac7c52f28a931da85a5
Signed-off-by: Boaz Shuster <ripcurld.github@gmail.com>
When using `docker volume rm -f`, all errors were ignored,
and volumes where Purged, even if they were still in
use by a container.
As a result, repeated calls to `docker volume rm -f`
actually removed the volume.
The `-f` option was implemented to ignore errors
in case a volume was already removed out-of-band
by a volume driver plugin.
This patch changes the remove function to not
ignore "volume in use" errors if `-f` is used.
Other errors are still ignored as before.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This adds a metrics packages that creates additional metrics. Add the
metrics endpoint to the docker api server under `/metrics`.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Add metrics to daemon package
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
api: use standard way for metrics route
Also add "type" query parameter
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
Convert timers to ms
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
This fix tries to address the issue in raised #23367 where an out-of-band
volume driver deletion leaves some data in docker. This prevent the
reuse of deleted volume names (by out-of-band volume driver like flocker).
This fix adds a `--force` field in `docker volume rm` to forcefully purge
the data of the volume that has already been deleted.
Related documentations have been updated.
This fix is tested manually with flocker, as is specified in #23367.
An integration test has also been added for the scenario described.
This fix fixes#23367.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
fixes#25766
If a container's AutoRemove is enabled, client will wait until it's
removed after container exits, this is implemented based on "destroy"
event.
Currently an "AutoRemove" container will report "destroy" event to
notify a hanging client to exit before all volumes are removed, this is
wrong, we should wait container until everything is cleaned up.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Moving all strings to the errors package wasn't a good idea after all.
Our custom implementation of Go errors predates everything that's nice
and good about working with errors in Go. Take as an example what we
have to do to get an error message:
```go
func GetErrorMessage(err error) string {
switch err.(type) {
case errcode.Error:
e, _ := err.(errcode.Error)
return e.Message
case errcode.ErrorCode:
ec, _ := err.(errcode.ErrorCode)
return ec.Message()
default:
return err.Error()
}
}
```
This goes against every good practice for Go development. The language already provides a simple, intuitive and standard way to get error messages, that is calling the `Error()` method from an error. Reinventing the error interface is a mistake.
Our custom implementation also makes very hard to reason about errors, another nice thing about Go. I found several (>10) error declarations that we don't use anywhere. This is a clear sign about how little we know about the errors we return. I also found several error usages where the number of arguments was different than the parameters declared in the error, another clear example of how difficult is to reason about errors.
Moreover, our custom implementation didn't really make easier for people to return custom HTTP status code depending on the errors. Again, it's hard to reason about when to set custom codes and how. Take an example what we have to do to extract the message and status code from an error before returning a response from the API:
```go
switch err.(type) {
case errcode.ErrorCode:
daError, _ := err.(errcode.ErrorCode)
statusCode = daError.Descriptor().HTTPStatusCode
errMsg = daError.Message()
case errcode.Error:
// For reference, if you're looking for a particular error
// then you can do something like :
// import ( derr "github.com/docker/docker/errors" )
// if daError.ErrorCode() == derr.ErrorCodeNoSuchContainer { ... }
daError, _ := err.(errcode.Error)
statusCode = daError.ErrorCode().Descriptor().HTTPStatusCode
errMsg = daError.Message
default:
// This part of will be removed once we've
// converted everything over to use the errcode package
// FIXME: this is brittle and should not be necessary.
// If we need to differentiate between different possible error types,
// we should create appropriate error types with clearly defined meaning
errStr := strings.ToLower(err.Error())
for keyword, status := range map[string]int{
"not found": http.StatusNotFound,
"no such": http.StatusNotFound,
"bad parameter": http.StatusBadRequest,
"conflict": http.StatusConflict,
"impossible": http.StatusNotAcceptable,
"wrong login/password": http.StatusUnauthorized,
"hasn't been activated": http.StatusForbidden,
} {
if strings.Contains(errStr, keyword) {
statusCode = status
break
}
}
}
```
You can notice two things in that code:
1. We have to explain how errors work, because our implementation goes against how easy to use Go errors are.
2. At no moment we arrived to remove that `switch` statement that was the original reason to use our custom implementation.
This change removes all our status errors from the errors package and puts them back in their specific contexts.
IT puts the messages back with their contexts. That way, we know right away when errors used and how to generate their messages.
It uses custom interfaces to reason about errors. Errors that need to response with a custom status code MUST implementent this simple interface:
```go
type errorWithStatus interface {
HTTPErrorStatusCode() int
}
```
This interface is very straightforward to implement. It also preserves Go errors real behavior, getting the message is as simple as using the `Error()` method.
I included helper functions to generate errors that use custom status code in `errors/errors.go`.
By doing this, we remove the hard dependency we have eeverywhere to our custom errors package. Yes, you can use it as a helper to generate error, but it's still very easy to generate errors without it.
Please, read this fantastic blog post about errors in Go: http://dave.cheney.net/2014/12/24/inspecting-errors
Signed-off-by: David Calavera <david.calavera@gmail.com>
Currently some commands including `kill`, `pause`, `restart`, `rm`,
`rmi`, `stop`, `unpause`, `udpate`, `wait` will print a lot of error
message on client side, with a lot of redundant messages, this commit is
trying to remove the unuseful and redundant information for user.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Don't rely on sqlite db for name registration and linking.
Instead register names and links when the daemon starts to an in-memory
store.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Makes `docker volume ls` and `docker volume inspect` ask the volume
drivers rather than only using what is cached locally.
Previously in order to use a volume from an external driver, one would
either have to use `docker volume create` or have a container that is
already using that volume for it to be visible to the other volume
API's.
For keeping uniqueness of volume names in the daemon, names are bound to
a driver on a first come first serve basis. If two drivers have a volume
with the same name, the first one is chosen, and a warning is logged
about the second one.
Adds 2 new methods to the plugin API, `List` and `Get`.
If a plugin does not implement these endpoints, a user will not be able
to find the specified volumes as well requests go through the drivers.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
