When resolving a reference that is both a Named and Digested, it could
be resolved to an image that has the same digest, but completely
different repository name.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
- Combine TestAttachWithTTY and TestAttachWithoutTTy to a single test using sub-tests
- Set up and tear-down the test-environment once
- Remove redundant client.ContainerRemove, as it's taken care of by testEnv.Clean()
- Run both tests in parallel
make TEST_FILTER=TestAttach DOCKER_GRAPHDRIVER=overlay2 TESTDEBUG=1 test-integration
Loaded image: busybox:latest
Loaded image: busybox:glibc
Loaded image: debian:bullseye-slim
Loaded image: hello-world:latest
Loaded image: arm32v7/hello-world:latest
INFO: Testing against a local daemon
=== RUN TestAttach
=== RUN TestAttach/without_TTY
=== PAUSE TestAttach/without_TTY
=== RUN TestAttach/with_TTY
=== PAUSE TestAttach/with_TTY
=== CONT TestAttach/without_TTY
=== CONT TestAttach/with_TTY
--- PASS: TestAttach (0.00s)
--- PASS: TestAttach/without_TTY (0.03s)
--- PASS: TestAttach/with_TTY (0.03s)
PASS
DONE 3 tests in 1.347s
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Calling function returned from setupTest (which calls testEnv.Clean) in
a defer block inside a test that spawns parallel subtests caused the
cleanup function to be called before any of the subtest did anything.
Change the defer expressions to use `t.Cleanup` instead to call it only
after all subtests have also finished.
This only changes tests which have parallel subtests.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
The daemon.lazyInitializeVolume() function only handles restoring Volumes
if a Driver is specified. The Container's MountPoints field may also
contain other kind of mounts (e.g., bind-mounts). Those were ignored, and
don't return an error; 1d9c8619cd/daemon/volumes.go (L243-L252C2)
However, the prepareMountPoints() assumed each MountPoint was a volume,
and logged an informational message about the volume being restored;
1d9c8619cd/daemon/mounts.go (L18-L25)
This would panic if the MountPoint was not a volume;
github.com/docker/docker/daemon.(*Daemon).prepareMountPoints(0xc00054b7b8?, 0xc0007c2500)
/root/rpmbuild/BUILD/src/engine/.gopath/src/github.com/docker/docker/daemon/mounts.go:24 +0x1c0
github.com/docker/docker/daemon.(*Daemon).restore.func5(0xc0007c2500, 0x0?)
/root/rpmbuild/BUILD/src/engine/.gopath/src/github.com/docker/docker/daemon/daemon.go:552 +0x271
created by github.com/docker/docker/daemon.(*Daemon).restore
/root/rpmbuild/BUILD/src/engine/.gopath/src/github.com/docker/docker/daemon/daemon.go:530 +0x8d8
panic: runtime error: invalid memory address or nil pointer dereference
[signal SIGSEGV: segmentation violation code=0x1 addr=0x30 pc=0x564e9be4c7c0]
This issue was introduced in 647c2a6cdd
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This adds an additional interval to be used by healthchecks during the
start period.
Typically when a container is just starting you want to check if it is
ready more quickly than a typical healthcheck might run. Without this
users have to balance between running healthchecks to frequently vs
taking a very long time to mark a container as healthy for the first
time.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Multiple daemons starting/running concurrently can collide with each
other when editing iptables rules. Most integration tests which opt into
parallelism and start daemons work around this problem by starting the
daemon with the --iptables=false option. However, some of the tests
neglect to pass the option when starting or restarting the daemon,
resulting in those tests being flaky.
Audit the integration tests which call t.Parallel() and (*Daemon).Stop()
and add --iptables=false arguments where needed.
Signed-off-by: Cory Snider <csnider@mirantis.com>
When live-restoring a container the volume driver needs be notified that
there is an active mount for the volume.
Before this change the count is zero until the container stops and the
uint64 overflows pretty much making it so the volume can never be
removed until another daemon restart.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This field was added in f0e5b3d7d8 to
account for older versions of the engine (Docker EE LTS versions), which
did not yet provide the OSType field in Docker info, and had to be manually
set using the TEST_OSTYPE env-var.
This patch removes the field in favor of the equivalent in DaemonInfo. It's
more verbose, but also less ambiguous what information we're using (i.e.,
the platform the daemon is running on, not the local platform).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Before 4bafaa00aa, if the daemon was
killed while a container was running and the container shim is killed
before the daemon is restarted, such as if the host system is
hard-rebooted, the daemon would restore the container to the stopped
state and set the exit code to 255. The aforementioned commit introduced
a regression where the container's exit code would instead be set to 0.
Fix the regression so that the exit code is once against set to 255 on
restore.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Commit 90de570cfa passed through the request
context to daemon.ContainerStop(). As a result, cancelling the context would
cancel the "graceful" stop of the container, and would proceed with forcefully
killing the container.
This patch partially reverts the changes from 90de570cfa
and breaks the context to prevent cancelling the context from cancelling the stop.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This makes the output of `docker save` fully OCI compliant.
When using the containerd image store, this code is not used. That
exporter will just use containerd's export method and should give us the
output we want for multi-arch images.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
`docker run -v /foo:/foo:ro` is now recursively read-only on kernel >= 5.12.
Automatically falls back to the legacy non-recursively read-only mount mode on kernel < 5.12.
Use `ro-non-recursive` to disable RRO.
Use `ro-force-recursive` or `rro` to explicitly enable RRO. (Fails on kernel < 5.12)
Fix issue 44978
Fix docker/for-linux issue 788
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
These changes add basic CDI integration to the docker daemon.
A cdi driver is added to handle cdi device requests. This
is gated by an experimental feature flag and is only supported on linux
This change also adds a CDISpecDirs (cdi-spec-dirs) option to the config.
This allows the default values of `/etc/cdi`, /var/run/cdi` to be overridden
which is useful for testing.
Signed-off-by: Evan Lezar <elezar@nvidia.com>
- use is.ErrorType
- replace uses of client.IsErrNotFound for errdefs.IsNotFound, as
the client no longer returns the old error-type.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Now that most uses of reexec have been replaced with non-reexec
solutions, most of the reexec.Init() calls peppered throughout the test
suites are unnecessary. Furthermore, most of the reexec.Init() calls in
test code neglects to check the return value to determine whether to
exit, which would result in the reexec'ed subprocesses proceeding to run
the tests, which would reexec another subprocess which would proceed to
run the tests, recursively. (That would explain why every reexec
callback used to unconditionally call os.Exit() instead of returning...)
Remove unneeded reexec.Init() calls from test and example code which no
longer needs it, and fix the reexec.Init() calls which are not inert to
exit after a reexec callback is invoked.
Signed-off-by: Cory Snider <csnider@mirantis.com>
This field is deprecated since 1261fe69a3,
and will now be omitted on API v1.44 and up for the `GET /images/json`,
`GET /images/{id}/json`, and `GET /system/df` endpoints.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Since cc19eba (backported to v23.0.4), the PreferredPool for docker0 is
set only when the user provides the bip config parameter or when the
default bridge already exist. That means, if a user provides the
fixed-cidr parameter on a fresh install or reboot their computer/server
without bip set, dockerd throw the following error when it starts:
> failed to start daemon: Error initializing network controller: Error
> creating default "bridge" network: failed to parse pool request for
> address space "LocalDefault" pool "" subpool "100.64.0.0/26": Invalid
> Address SubPool
See #45356.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
