- Using "/go/" redirects for some topics, which allows us to
redirect to new locations if topics are moved around in the
documentation.
- Updated some old URLs to their new location.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
While the field in the Go struct is named `NanoCPUs`, it has a JSON label to
use `NanoCpus`, which was added in the original pull request (not clear what
the reason was); 846baf1fd3
Some notes:
- Golang processes field names case-insensitive, so when *using* the API,
both cases should work, but when inspecting a container, the field is
returned as `NanoCpus`.
- This only affects Containers.Resources. The `Limits` and `Reservation`
for SwarmKit services and SwarmKit "nodes" do not override the name
for JSON, so have the canonical (`NanoCPUs`) casing.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Current description of the "v" option doesn't explain what happens to
the volumes that are still in use by other containers. Turns out that
the only volumes that are removed are unnamed ones[1].
Perhaps a good way of clarifying this behavior would be adapting the
description from "docker rm --help".
As for the docs/api/v1.*.yaml changes — they seem to be applicable,
since the origin of this behavior dates way back to the 2016 or v1.11[2].
[1]: a24a71c50f/daemon/mounts.go (L34-L38)
[2]: dd7d1c8a02
Signed-off-by: Nikolay Edigaryev <edigaryev@gmail.com>
Add Ulimits field to the ContainerSpec API type and wire it to Swarmkit.
This is related to #40639.
Signed-off-by: Albin Kerouanton <albin@akerouanton.name>
This patch adds a new "prune" event type to indicate that pruning of a resource
type completed.
This event-type can be used on systems that want to perform actions after
resources have been cleaned up. For example, Docker Desktop performs an fstrim
after resources are deleted (https://github.com/linuxkit/linuxkit/tree/v0.7/pkg/trim-after-delete).
While the current (remove, destroy) events can provide information on _most_
resources, there is currently no event triggered after the BuildKit build-cache
is cleaned.
Prune events have a `reclaimed` attribute, indicating the amount of space that
was reclaimed (in bytes). The attribute can be used, for example, to use as a
threshold for performing fstrim actions. Reclaimed space for `network` events
will always be 0, but the field is added to be consistent with prune events for
other resources.
To test this patch:
Create some resources:
for i in foo bar baz; do \
docker network create network_$i \
&& docker volume create volume_$i \
&& docker run -d --name container_$i -v volume_$i:/volume busybox sh -c 'truncate -s 5M somefile; truncate -s 5M /volume/file' \
&& docker tag busybox:latest image_$i; \
done;
docker pull alpine
docker pull nginx:alpine
echo -e "FROM busybox\nRUN truncate -s 50M bigfile" | DOCKER_BUILDKIT=1 docker build -
Start listening for "prune" events in another shell:
docker events --filter event=prune
Prune containers, networks, volumes, and build-cache:
docker system prune -af --volumes
See the events that are returned:
docker events --filter event=prune
2020-07-25T12:12:09.268491000Z container prune (reclaimed=15728640)
2020-07-25T12:12:09.447890400Z network prune (reclaimed=0)
2020-07-25T12:12:09.452323000Z volume prune (reclaimed=15728640)
2020-07-25T12:12:09.517236200Z image prune (reclaimed=21568540)
2020-07-25T12:12:09.566662600Z builder prune (reclaimed=52428841)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
After dicussing with maintainers, it was decided putting the burden of
providing the full cap list on the client is not a good design.
Instead we decided to follow along with the container API and use cap
add/drop.
This brings in the changes already merged into swarmkit.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Kernel memory limit is not supported on cgroup v2.
Even on cgroup v1, kernel memory limit (`kmem.limit_in_bytes`) has been deprecated since kernel 5.4.
0158115f70
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
The initial implementation followed the Swarm API, where
PidsLimit is located in ContainerSpec. This is not the
desired place for this property, so moving the field to
TaskTemplate.Resources in our API.
A similar change should be made in the SwarmKit API (likely
keeping the old field for backward compatibility, because
it was merged some releases back)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Support for PidsLimit was added to SwarmKit in docker/swarmkit/pull/2415,
but never exposed through the Docker remove API.
This patch exposes the feature in the repote API.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The pages that were linked to have moved, so changing the
links to point to docs.docker.com instead.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Adding separate documents for older API versions, so that these don't have to
be collected from each tag/release branch. For each version of the API, I picked
the highest release that uses the API (to make sure to include possible fixes
in the swagger);
git mv api/swagger.yaml api/swagger-current.yaml
git checkout v18.05.0-ce -- api/swagger.yaml
git mv api/swagger.yaml docs/api/v1.37.yaml
git checkout v18.02.0-ce -- api/swagger.yaml
git mv api/swagger.yaml docs/api/v1.36.yaml
git checkout v18.01.0-ce -- api/swagger.yaml
git mv api/swagger.yaml docs/api/v1.35.yaml
git checkout v17.11.0-ce -- api/swagger.yaml
git mv api/swagger.yaml docs/api/v1.34.yaml
git checkout v17.10.0-ce -- api/swagger.yaml
git mv api/swagger.yaml docs/api/v1.33.yaml
git checkout v17.09.1-ce -- api/swagger.yaml
git mv api/swagger.yaml docs/api/v1.32.yaml
git checkout v17.07.0-ce -- api/swagger.yaml
git mv api/swagger.yaml docs/api/v1.31.yaml
git checkout v17.06.2-ce -- api/swagger.yaml
git mv api/swagger.yaml docs/api/v1.30.yaml
git mv api/swagger-current.yaml api/swagger.yaml
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Metrics collectors generally don't need the daemon to prime the stats
with something to compare since they already have something to compare
with.
Before this change, the API does 2 collection cycles (which takes
roughly 2s) in order to provide comparison for CPU usage over 1s. This
was primarily added so that `docker stats --no-stream` had something to
compare against.
Really the CLI should have just made a 2nd call and done the comparison
itself rather than forcing it on all API consumers.
That ship has long sailed, though.
With this change, clients can set an option to just pull a single stat,
which is *at least* a full second faster:
Old:
```
time curl --unix-socket
/go/src/github.com/docker/docker/bundles/test-integration-shell/docker.sock
http://./containers/test/stats?stream=false\&one-shot=false > /dev/null
2>&1
real0m1.864s
user0m0.005s
sys0m0.007s
time curl --unix-socket
/go/src/github.com/docker/docker/bundles/test-integration-shell/docker.sock
http://./containers/test/stats?stream=false\&one-shot=false > /dev/null
2>&1
real0m1.173s
user0m0.010s
sys0m0.006s
```
New:
```
time curl --unix-socket
/go/src/github.com/docker/docker/bundles/test-integration-shell/docker.sock
http://./containers/test/stats?stream=false\&one-shot=true > /dev/null
2>&1
real0m0.680s
user0m0.008s
sys0m0.004s
time curl --unix-socket
/go/src/github.com/docker/docker/bundles/test-integration-shell/docker.sock
http://./containers/test/stats?stream=false\&one-shot=true > /dev/null
2>&1
real0m0.156s
user0m0.007s
sys0m0.007s
```
This fixes issues with downstreams ability to use the stats API to
collect metrics.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This adds a new `fluentd-request-ack` logging option for the Fluentd
logging driver. If enabled, the server will respond with an acknowledgement.
This option improves the reliability of the message transmission. This
change is not versioned, and affects all API versions.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This query-parameter was deprecated in docker 1.13 in commit
820b809e70, and scheduled for
removal in docker 17.12, so we should remove it for the next
API version.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Adds support for ReplicatedJob and GlobalJob service modes. These modes
allow running service which execute tasks that exit upon success,
instead of daemon-type tasks.
Signed-off-by: Drew Erny <drew.erny@docker.com>
Adds a new ServiceStatus field to the Service object, which includes the
running and desired task counts. This new field is gated behind a
"status" query parameter.
Signed-off-by: Drew Erny <drew.erny@docker.com>
The `/session` endpoint left experimental in API V1.39 through
239047c2d3 and
01c9e7082e, but the API reference
was not updated accordingly.
This updates the API documentation to match the change.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Unlike Linux which uses a temp dir as GOPATH, Windows
uses c:\go. Among other things, this blocks go get.
Moving GOPATH to c:\gopath and updating references in
comments and documentation.
Currently the change is being scoped narrowly. In the
future GOPATH value could be passed as a parameter to
the ps1 scripts.
Signed-off-by: Vikram bir Singh <vikrambir.singh@docker.com>
- remove -check.* flags
- use (per-test) -timeout flag
- allow user to override TEST_SKIP_* regardless of TESTFLAGS
- remove test-imports validation
Signed-off-by: Tibor Vass <tibor@docker.com>
This adds both a daemon-wide flag and a container creation property:
- Set the `CgroupnsMode: "host|private"` HostConfig property at
container creation time to control what cgroup namespace the container
is created in
- Set the `--default-cgroupns-mode=host|private` daemon flag to control
what cgroup namespace containers are created in by default
- Set the default if the daemon flag is unset to "host", for backward
compatibility
- Default to CgroupnsMode: "host" for client versions < 1.40
Signed-off-by: Rob Gulewich <rgulewich@netflix.com>
lxc-user-nic can eliminate slirp overhead but needs /etc/lxc/lxc-usernet to be configured for the current user.
To use lxc-user-nic, $DOCKERD_ROOTLESS_ROOTLESSKIT_NET=lxc-user-nic also needs to be set.
This commit also bumps up RootlessKit from v0.3.0 to v0.4.0:
70e0502f32...e92d5e772e
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
The `--rootless` flag had a couple of issues:
* #38702: euid=0, $USER="root" but no access to cgroup ("rootful" Docker in rootless Docker)
* #39009: euid=0 but $USER="docker" (rootful boot2docker)
To fix#38702, XDG dirs are ignored as in rootful Docker, unless the
dockerd is directly running under RootlessKit namespaces.
RootlessKit detection is implemented by checking whether `$ROOTLESSKIT_STATE_DIR` is set.
To fix#39009, the non-robust `$USER` check is now completely removed.
The entire logic can be illustrated as follows:
```
withRootlessKit := getenv("ROOTLESSKIT_STATE_DIR")
rootlessMode := withRootlessKit || cliFlag("--rootless")
honorXDG := withRootlessKit
useRootlessKitDockerProxy := withRootlessKit
removeCgroupSpec := rootlessMode
adjustOOMScoreAdj := rootlessMode
```
Close#39024Fix#38702#39009
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
Now `docker run -p` ports can be exposed to the host namespace automatically when `dockerd-rootless.sh` is launched with
`--userland-proxy --userland-proxy-path $(which rootlesskit-docker-proxy)`.
This is akin to how Docker for Mac/Win works with `--userland-proxy-path=/path/to/vpnkit-expose-port`.
The port number on the host namespace needs to be set to >= 1024.
SCTP ports are currently unsupported.
RootlessKit changes: 7bbbc48a6f...ed26714429
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
This patch hard-codes support for NVIDIA GPUs.
In a future patch it should move out into its own Device Plugin.
Signed-off-by: Tibor Vass <tibor@docker.com>
This changes the default ipc mode of daemon/engine to be private,
meaning the containers will not have their /dev/shm bind-mounted
from the host by default. The benefits of doing this are:
1. No leaked mounts. Eliminate a possibility to leak mounts into
other namespaces (and therefore unfortunate errors like "Unable to
remove filesystem for <ID>: remove /var/lib/docker/containers/<ID>/shm:
device or resource busy").
2. Working checkpoint/restore. Make `docker checkpoint`
not lose the contents of `/dev/shm`, but save it to
the dump, and be restored back upon `docker start --checkpoint`
(currently it is lost -- while CRIU handles tmpfs mounts,
the "shareable" mount is seen as external to container,
and thus rightfully ignored).
3. Better security. Currently any container is opened to share
its /dev/shm with any other container.
Obviously, this change will break the following usage scenario:
$ docker run -d --name donor busybox top
$ docker run --rm -it --ipc container:donor busybox sh
Error response from daemon: linux spec namespaces: can't join IPC
of container <ID>: non-shareable IPC (hint: use IpcMode:shareable
for the donor container)
The soution, as hinted by the (amended) error message, is to
explicitly enable donor sharing by using --ipc shareable:
$ docker run -d --name donor --ipc shareable busybox top
Compatibility notes:
1. This only applies to containers created _after_ this change.
Existing containers are not affected and will work fine
as their ipc mode is stored in HostConfig.
2. Old backward compatible behavior ("shareable" containers
by default) can be enabled by either using
`--default-ipc-mode shareable` daemon command line option,
or by adding a `"default-ipc-mode": "shareable"`
line in `/etc/docker/daemon.json` configuration file.
3. If an older client (API < 1.40) is used, a "shareable" container
is created. A test to check that is added.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
The Swarmkit api specifies a target for configs called called "Runtime"
which indicates that the config is not mounted into the container but
has some other use. This commit updates the Docker api to reflect this.
Signed-off-by: Drew Erny <drew.erny@docker.com>
Please refer to `docs/rootless.md`.
TLDR:
* Make sure `/etc/subuid` and `/etc/subgid` contain the entry for you
* `dockerd-rootless.sh --experimental`
* `docker -H unix://$XDG_RUNTIME_DIR/docker.sock run ...`
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Monitoring systems and load balancers are usually configured to use HEAD
requests for health monitoring. The /_ping endpoint currently does not
support this type of request, which means that those systems have fallback
to GET requests.
This patch adds support for HEAD requests on the /_ping endpoint.
Although optional, this patch also returns `Content-Type` and `Content-Length`
headers in case of a HEAD request; Refering to RFC 7231, section 4.3.2:
The HEAD method is identical to GET except that the server MUST NOT
send a message body in the response (i.e., the response terminates at
the end of the header section). The server SHOULD send the same
header fields in response to a HEAD request as it would have sent if
the request had been a GET, except that the payload header fields
(Section 3.3) MAY be omitted. This method can be used for obtaining
metadata about the selected representation without transferring the
representation data and is often used for testing hypertext links for
validity, accessibility, and recent modification.
A payload within a HEAD request message has no defined semantics;
sending a payload body on a HEAD request might cause some existing
implementations to reject the request.
The response to a HEAD request is cacheable; a cache MAY use it to
satisfy subsequent HEAD requests unless otherwise indicated by the
Cache-Control header field (Section 5.2 of [RFC7234]). A HEAD
response might also have an effect on previously cached responses to
GET; see Section 4.3.5 of [RFC7234].
With this patch applied, either `GET` or `HEAD` requests work; the only
difference is that the body is empty in case of a `HEAD` request;
curl -i --unix-socket /var/run/docker.sock http://localhost/_ping
HTTP/1.1 200 OK
Api-Version: 1.40
Cache-Control: no-cache, no-store, must-revalidate
Docker-Experimental: false
Ostype: linux
Pragma: no-cache
Server: Docker/dev (linux)
Date: Mon, 14 Jan 2019 12:35:16 GMT
Content-Length: 2
Content-Type: text/plain; charset=utf-8
OK
curl --head -i --unix-socket /var/run/docker.sock http://localhost/_ping
HTTP/1.1 200 OK
Api-Version: 1.40
Cache-Control: no-cache, no-store, must-revalidate
Content-Length: 0
Content-Type: text/plain; charset=utf-8
Docker-Experimental: false
Ostype: linux
Pragma: no-cache
Server: Docker/dev (linux)
Date: Mon, 14 Jan 2019 12:34:15 GMT
The client is also updated to use `HEAD` by default, but fallback to `GET`
if the daemon does not support this method.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- Add support for exact list of capabilities, support only OCI model
- Support OCI model on CapAdd and CapDrop but remain backward compatibility
- Create variable locally instead of declaring it at the top
- Use const for magic "ALL" value
- Rename `cap` variable as it overlaps with `cap()` built-in
- Normalize and validate capabilities before use
- Move validation for conflicting options to validateHostConfig()
- TweakCapabilities: simplify logic to calculate capabilities
Signed-off-by: Olli Janatuinen <olli.janatuinen@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This fix tries to address the issue raised in 37038 where
there were no memory.kernelTCP support for linux.
This fix add MemoryKernelTCP to HostConfig, and pass
the config to runtime-spec.
Additional test case has been added.
This fix fixes 37038.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This commit contains changes to configure DataPathPort
option. By default we use 4789 port number. But this commit
will allow user to configure port number during swarm init.
DataPathPort can't be modified after swarm init.
Signed-off-by: selansen <elango.siva@docker.com>
This allows non-recursive bind-mount, i.e. mount(2) with "bind" rather than "rbind".
Swarm-mode will be supported in a separate PR because of mutual vendoring.
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
This feature was added in 514ce73391,
and was merged after API v1.39 shipped as part of the Docker 18.09
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This feature was added in 14da20f5e7,
and was merged after API v1.39 shipped as part of the Docker 18.09
release candidates.
This commit moves the feature to the correct API version.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Looks like -i (together with DOCKER_INCREMENTAL_BINARY etc)
were used to get faster incremental builds.
Nowdays (since Go 1.10) this is no longer the case, as
go build cache is used [1]. Here's a quote:
> You do not have to use "go test -i" or "go build -i" or
> "go install" just to get fast incremental builds. We will
> not have to teach new users those workarounds anymore.
> Everything will just be fast.
To enable go cache between builds, add a volume for /root/.cache.
[1] https://groups.google.com/forum/#!msg/golang-dev/qfa3mHN4ZPA/X2UzjNV1BAAJ
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Adds support for sysctl options in docker services.
* Adds API plumbing for creating services with sysctl options set.
* Adds swagger.yaml documentation for new API field.
* Updates the API version history document.
* Changes executor package to make use of the Sysctls field on objects
* Includes integration test to verify that new behavior works.
Essentially, everything needed to support the equivalent of docker run's
`--sysctl` option except the CLI.
Includes a vendoring of swarmkit for proto changes to support the new
behavior.
Signed-off-by: Drew Erny <drew.erny@docker.com>
When requesting information about the daemon's configuration through the `/info`
endpoint, missing features (or non-recommended settings) may have to be presented
to the user.
Detecting these situations, and printing warnings currently is handled by the
cli, which results in some complications:
- duplicated effort: each client has to re-implement detection and warnings.
- it's not possible to generate warnings for reasons outside of the information
returned in the `/info` response.
- cli-side detection has to be updated for new conditions. This means that an
older cli connecting to a new daemon may not print all warnings (due to
it not detecting the new conditions)
- some warnings (in particular, warnings about storage-drivers) depend on
driver-status (`DriverStatus`) information. The format of the information
returned in this field is not part of the API specification and can change
over time, resulting in cli-side detection no longer being functional.
This patch adds a new `Warnings` field to the `/info` response. This field is
to return warnings to be presented by the user.
Existing warnings that are currently handled by the CLI are copied to the daemon
as part of this patch; This change is backward-compatible with existing
clients; old client can continue to use the client-side warnings, whereas new
clients can skip client-side detection, and print warnings that are returned by
the daemon.
Example response with this patch applied;
```bash
curl --unix-socket /var/run/docker.sock http://localhost/info | jq .Warnings
```
```json
[
"WARNING: bridge-nf-call-iptables is disabled",
"WARNING: bridge-nf-call-ip6tables is disabled"
]
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This feature allows user to specify list of subnets for global
default address pool. User can configure subnet list using
'swarm init' command. Daemon passes the information to swarmkit.
We validate the information in swarmkit, then store it in cluster
object. when IPAM init is called, we pass subnet list to IPAM driver.
Signed-off-by: selansen <elango.siva@docker.com>
* Expose license status in Info
This wires up a new field in the Info payload that exposes the license.
For moby this is hardcoded to always report a community edition.
Downstream enterprise dockerd will have additional licensing logic wired
into this function to report details about the current license status.
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
* Code review comments
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
* Add windows autogen support
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
It said `TESTFLAGS='-test.run ^TestValidateIPAddress$' make test-unit`
runs `TestBuild` test, but actually runs `TestValidateIPAddress` test.
Signed-off-by: Donghwa Kim <shanytt@gmail.com>
In version-history.md, the link for `Docker Engine API v1.37`
was pointed to `v1.36`.
This fix fixes the incorrect link.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Further to 355cf9483c which caught some
of these. This should fix the remainder in the contributing docs.
Signed-off-by: Brett Randall <javabrett@gmail.com>
If there is a package-rename forthcoming, it isn't currently evident on master, but seems to show in doc.
Changed doc to show actual docker/docker paths as they occur now instead of moby/moby.
Signed-off-by: Brett Randall <javabrett@gmail.com>
This largely removes references to Docker where possible.
The HOWTO guides are still Docker docs and refer to Docker not
moby, so the next step is to rework these as Moby docs and put
them in `docs/` in this repo.
Signed-off-by: Justin Cormack <justin.cormack@docker.com>
Commit d91c5f42eb added
support for "Isolation" mode for services, but didn't
get merged before API 1.34.
This patch moves the description in the API version
history to the correct API version (1.35), and does
a slight rewording of the functionality.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Currently, if a container removal has failed for some reason,
any client waiting for removal (e.g. `docker run --rm`) is
stuck, waiting for removal to succeed while it has failed already.
For more details and the reproducer, please check
https://github.com/moby/moby/issues/34945
This commit addresses that by allowing `ContainerWait()` with
`container.WaitCondition == "removed"` argument to return an
error in case of removal failure. The `ContainerWaitOKBody`
stucture returned to a client is amended with a pointer to `struct Error`,
containing an error message string, and the `Client.ContainerWait()`
is modified to return the error, if any, to the client.
Note that this feature is only available for API version >= 1.34.
In order for the old clients to be unstuck, we just close the connection
without writing anything -- this causes client's error.
Now, docker-cli would need a separate commit to bump the API to 1.34
and to show an error returned, if any.
[v2: recreate the waitRemove channel after closing]
[v3: document; keep legacy behavior for older clients]
[v4: convert Error from string to pointer to a struct]
[v5: don't emulate old behavior, send empty response in error case]
[v6: rename legacy* vars to include version suffix]
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Describe more how host port allocation is done when
container is stopped/started in "PublishAllPorts".
Signed-off-by: Boaz Shuster <ripcurld.github@gmail.com>
