In #28507 and #28885, `docker service/node ps -a` has been removed so that
information about slots are show up even without `-a` flag.
The output of `docker stack ps` reused the same output as `docker service/node ps`.
However, the `-a` was still there. It might make sense to remove `docker stack ps -a`
as well to bring consistency with `docker service/node ps`.
This fix is related to #28507, #28885, and #25983.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Move plugins to shared distribution stack with images.
Create immutable plugin config that matches schema2 requirements.
Ensure data being pushed is same as pulled/created.
Store distribution artifacts in a blobstore.
Run init layer setup for every plugin start.
Fix breakouts from unsafe file accesses.
Add support for `docker plugin install --alias`
Uses normalized references for default names to avoid collisions when using default hosts/tags.
Some refactoring of the plugin manager to support the change, like removing the singleton manager and adding manager config struct.
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
Signed-off-by: Derek McGowan <derek@mcgstyle.net>
When plugins have a positive refcount, they were not allowed to be
removed. However, plugins could still be disabled when volumes
referenced it and containers using them were running.
This change fixes that by enforcing plugin refcount during disable.
A "force" disable option is also added to ignore reference refcounting.
Signed-off-by: Anusha Ragunathan <anusha@docker.com>
This fix is a follow up for comment:
https://github.com/docker/docker/pull/29186/files#r91277345
While #29186 addresses the issue of `docker inspect <unknown object>`
on Windows, it actually makes `docker plugin inspect <unknown object>`
out `object not found` on Windows as well. This is actually misleading
as plugin is not supported on Windows.
This fix reverted the change in #29186 while at the same time,
checks `not supported` in `docker inspect <unknown object>` so that
- `docker plugin inspect <unknown object>` returns `not supported` on Windows
- `docker inspect <unknown object>` returns `not found` on Windows
This fix is related to #29186 and #29185.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the issue raised in 29291 where
the output of `--replicas` in `service create/update`:
```
--replicas uint Number of tasks (default none)
```
is misleading. User might incorrectly assume the number of replicas
would be `0` (`none`) by default, while the actual default is `1`.
The issue comes from the fact that some of the default values are
from daemon and it is not possible for client to find out the default
value.
In this case, it might be better to just simply not displaying `(default none)`.
This fix returns "" for `Uint64Opt` so that `(default none)` is hidden.
In addition to `--replicas`, this fix also changes
`--restart-delay`, `--restart-max-attempts`, `--stop-grace-period`,
`--health-interval`, `--health-timeout`, and `--restart-window`
in a similiar fashion.
New Output:
```
--health-interval duration Time between running the check (ns|us|ms|s|m|h)
--health-timeout duration Maximum time to allow one check to run (ns|us|ms|s|m|h)
...
--replicas uint Number of tasks
...
--restart-delay duration Delay between restart attempts (ns|us|ms|s|m|h)
--restart-max-attempts uint Maximum number of restarts before giving up
--restart-window duration Window used to evaluate the restart policy (ns|us|ms|s|m|h)
...
--stop-grace-period duration Time to wait before force killing a container (ns|us|ms|s|m|h)
```
The docs has been updated. Note the docs for help output of `service create/update`
is out of sync with the current master. This fix replace with the update-to-date
help output.
This fix fixes 29291.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Move configurations into a single file.
Abstract download manager in pull config.
Add supports for schema2 only and schema2 type checking.
Add interface for providing push layers.
Abstract image store to generically handle configurations.
Signed-off-by: Derek McGowan <derek@mcgstyle.net>
The `docker logs` command performed a
client-side check if the container's
logging driver was supported.
Now that we allow the client to connect
to both "older" and "newer" daemon versions,
this check is best done daemon-side.
This patch remove the check on the client
side, and leaves validation to the daemon,
which should be the source of truth.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The current validation only checked for the
number of elements in the volume-spec, however,
did not validate if the elements were empty.
Because of this, an empty volume-spec (""),
or volume spec only containing separators ("::")
would not be invalidated.
This adds a simple check for empty elements in
the volume-spec, and returns an error if
the spec is invalid.
A unit-test is also added to verify the behavior.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
the `convertVolumeToMount()` function did not take
anonymous volumes into account when converting
volume specifications to bind-mounts.
this resulted in the conversion to try to
look up an empty "source" volume, which
lead to an error;
undefined volume:
this patch distinguishes "anonymous"
volumes from bind-mounts and named-volumes,
and skips further processing if no source
is defined (i.e. the volume is "anonymous").
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
While looking into `docker stats <c1> <c2> ...` I noticed that
the error output is quite long, especially if there are multiple errors:
```sh
ubuntu@ubuntu:~/docker$ docker stats nofound
: Error response from daemon: No such container: nofound
ubuntu@ubuntu:~/docker$ docker stats nofound foo bar
: Error response from daemon: No such container: nofound, : Error response from daemon: No such container: foo, : Error response from daemon: No such container: bar
```
There are several issues,
1. There is an extra `: ` at the beginning. That is because if container is not found,
the name will not be available from the daemon.
2. Multiple errors are concatenated with `, ` which will be quite long.
This fix:
1. Only prient out the error from daemon.
2. Multiple errors are printed out line by line.
Below is the new output:
```sh
ubuntu@ubuntu:~/docker$ docker stats nofound
Error response from daemon: No such container: nofound
ubuntu@ubuntu:~/docker$ docker stats nofound foo bar
Error response from daemon: No such container: nofound
Error response from daemon: No such container: foo
Error response from daemon: No such container: bar
```
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
check to see if the node is part of a swarm, and if so, if it is unlocked first.
If neither of these are true, abort the command.
Signed-off-by: Ying Li <ying.li@docker.com>
the "docker swarm leave" command description
mentioned that the command can only be used
for workers, however, the command can also
be used for managers (using the `-f` / `--force`
option).
this patch removes the "(workers only)" part
of the command description.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The top-level `docker inspect` command could return
an error if the nodes Swarm certificates were expired.
In situations where the user did not explicitly
ask for an object-type (`--type=foo`), we should
ignore these errors, and consider them equal to
"node is not a swarm manager".
This change makes `docker inspect` ignore these
errors if no type was specified.
As a further optimization, the "swarm status"
result is now stored in a variable, so that
other swarm-specific API calls can be skipped.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This fix tries to address the issue raised in 28581 and 28927
where it is not possible to create a secret from a file (only
through STDIN).
This fix add a flag `--file` to `docker secret create` so that
it is possible to create a secret from a file with:
```
docker secret create --file secret.in secret.name
```
or
```
echo TEST | docker secret create --file - secret.name
```
Related docs has been updated.
An integration test has been added to cover the changes.
This fix fixes 28581.
This fix is related to 28927.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the issue raised in 24352. Previously,
when `docker swarm update` has no flags, the output is
```
Swarm updated.
```
even though nothing was updated. This could be misleading for
users.
This fix tries to address the issue by adding a `PreRunE` function
in the command so that in case no flag is provided (`cmd.Flags().NFlag() == 0`),
the usage will be outputed instead.
An integration has been added to cover the changes.
This fix fixes 24352.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
