The function was checking in a loop if networking for the container was
disabled. Change the function to return early, and to only set hooks
if one needs to be set.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The containerdCli was somewhat confusing (is it the CLI?); let's rename
to make it match what it is :)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Some snapshotters (like overlayfs or zfs) can't mount the same
directories twice. For example if the same directroy is used as an upper
directory in two mounts the kernel will output this warning:
overlayfs: upperdir is in-use as upperdir/workdir of another mount, accessing files from both mounts will result in undefined behavior.
And indeed accessing the files from both mounts will result in an "No
such file or directory" error.
This change introduces reference counts for the mounts, if a directory
is already mounted the mount interface will only increment the mount
counter and return the mount target effectively making sure that the
filesystem doesn't end up in an undefined behavior.
Signed-off-by: Djordje Lukic <djordje.lukic@docker.com>
Audit the OCI spec options used for Linux containers to ensure they are
less order-dependent. Ensure they don't assume that any pointer fields
are non-nil and that they don't unintentionally clobber mutations to the
spec applied by other options.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Many of the fields in LinuxResources struct are pointers to scalars for
some reason, presumably to differentiate between set-to-zero and unset
when unmarshaling from JSON, despite zero being outside the acceptable
range for the corresponding kernel tunables. When creating the OCI spec
for a container, the daemon sets the container's OCI spec CPUShares and
BlkioWeight parameters to zero when the corresponding Docker container
configuration values are zero, signifying unset, despite the minimum
acceptable value for CPUShares being two, and BlkioWeight ten. This has
gone unnoticed as runC does not distingiush set-to-zero from unset as it
also uses zero internally to represent unset for those fields. However,
kata-containers v3.2.0-alpha.3 tries to apply the explicit-zero resource
parameters to the container, exactly as instructed, and fails loudly.
The OCI runtime-spec is silent on how the runtime should handle the case
when those parameters are explicitly set to out-of-range values and
kata's behaviour is not unreasonable, so the daemon must therefore be in
the wrong.
Translate unset values in the Docker container's resources HostConfig to
omit the corresponding fields in the container's OCI spec when starting
and updating a container in order to maximize compatibility with
runtimes.
Signed-off-by: Cory Snider <csnider@mirantis.com>
The existing runtimes reload logic went to great lengths to replace the
directory containing runtime wrapper scripts as atomically as possible
within the limitations of the Linux filesystem ABI. Trouble is,
atomically swapping the wrapper scripts directory solves the wrong
problem! The runtime configuration is "locked in" when a container is
started, including the path to the runC binary. If a container is
started with a runtime which requires a daemon-managed wrapper script
and then the daemon is reloaded with a config which no longer requires
the wrapper script (i.e. some args -> no args, or the runtime is dropped
from the config), that container would become unmanageable. Any attempts
to stop, exec or otherwise perform lifecycle management operations on
the container are likely to fail due to the wrapper script no longer
existing at its original path.
Atomically swapping the wrapper scripts is also incompatible with the
read-copy-update paradigm for reloading configuration. A handler in the
daemon could retain a reference to the pre-reload configuration for an
indeterminate amount of time after the daemon configuration has been
reloaded and updated. It is possible for the daemon to attempt to start
a container using a deleted wrapper script if a request to run a
container races a reload.
Solve the problem of deleting referenced wrapper scripts by ensuring
that all wrapper scripts are *immutable* for the lifetime of the daemon
process. Any given runtime wrapper script must always exist with the
same contents, no matter how many times the daemon config is reloaded,
or what changes are made to the config. This is accomplished by using
everyone's favourite design pattern: content-addressable storage. Each
wrapper script file name is suffixed with the SHA-256 digest of its
contents to (probabilistically) guarantee immutability without needing
any concurrency control. Stale runtime wrapper scripts are only cleaned
up on the next daemon restart.
Split the derived runtimes configuration from the user-supplied
configuration to have a place to store derived state without mutating
the user-supplied configuration or exposing daemon internals in API
struct types. Hold the derived state and the user-supplied configuration
in a single struct value so that they can be updated as an atomic unit.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Ensure data-race-free access to the daemon configuration without
locking by mutating a deep copy of the config and atomically storing
a pointer to the copy into the daemon-wide configStore value. Any
operations which need to read from the daemon config must capture the
configStore value only once and pass it around to guarantee a consistent
view of the config.
Signed-off-by: Cory Snider <csnider@mirantis.com>
`docker run -v /foo:/foo:ro` is now recursively read-only on kernel >= 5.12.
Automatically falls back to the legacy non-recursively read-only mount mode on kernel < 5.12.
Use `ro-non-recursive` to disable RRO.
Use `ro-force-recursive` or `rro` to explicitly enable RRO. (Fails on kernel < 5.12)
Fix issue 44978
Fix docker/for-linux issue 788
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
The `docker-init` binary is not intended to be a user-facing command, and as such it is more appropriate for it to be found in `/usr/libexec` (or similar) than in `PATH` (see the FHS, especially https://refspecs.linuxfoundation.org/FHS_3.0/fhs/ch04s07.html and https://refspecs.linuxfoundation.org/FHS_2.3/fhs-2.3.html#USRLIBLIBRARIESFORPROGRAMMINGANDPA).
This adjusts the logic for using that configuration option to take this into account and appropriately search for `docker-init` (or the user's configured alternative) in these directories before falling back to the existing `PATH` lookup behavior.
This behavior _used_ to exist for the old `dockerinit` binary (of a similar name and used in a similar way but for an alternative purpose), but that behavior was removed in 4357ed4a73 when that older `dockerinit` was also removed.
Most of this reasoning _also_ applies to `docker-proxy` (and various `containerd-xxx` binaries such as the shims), but this change does not affect those. It would be relatively straightforward to adapt `LookupInitPath` to be a more generic function such as `libexecLookupPath` or similar if we wanted to explore that.
See 14482589df/cli-plugins/manager/manager_unix.go for the related path list in the CLI which loads CLI plugins from a similar set of paths (with a similar rationale - plugin binaries are not typically intended to be run directly by users but rather invoked _via_ the CLI binary).
Signed-off-by: Tianon Gravi <admwiggin@gmail.com>
Signed-off-by: Djordje Lukic <djordje.lukic@docker.com>
c8d/daemon: Mount root and fill BaseFS
This fixes things that were broken due to nil BaseFS like `docker cp`
and running a container with workdir override.
This is more of a temporary hack than a real solution.
The correct fix would be to refactor the code to make BaseFS and LayerRW
an implementation detail of the old image store implementation and use
the temporary mounts for the c8d implementation instead.
That requires more work though.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
daemon/images: Don't unset BaseFS
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
daemon/network/filter_test.go:174:19: empty-lines: extra empty line at the end of a block (revive)
daemon/restart.go:17:116: empty-lines: extra empty line at the end of a block (revive)
daemon/daemon_linux_test.go:255:41: empty-lines: extra empty line at the end of a block (revive)
daemon/reload_test.go:340:58: empty-lines: extra empty line at the end of a block (revive)
daemon/oci_linux.go:495:101: empty-lines: extra empty line at the end of a block (revive)
daemon/seccomp_linux_test.go:17:36: empty-lines: extra empty line at the start of a block (revive)
daemon/container_operations.go:560:73: empty-lines: extra empty line at the end of a block (revive)
daemon/daemon_unix.go:558:76: empty-lines: extra empty line at the end of a block (revive)
daemon/daemon_unix.go:1092:64: empty-lines: extra empty line at the start of a block (revive)
daemon/container_operations.go:587:24: empty-lines: extra empty line at the end of a block (revive)
daemon/network.go:807:18: empty-lines: extra empty line at the end of a block (revive)
daemon/network.go:813:42: empty-lines: extra empty line at the end of a block (revive)
daemon/network.go:872:72: empty-lines: extra empty line at the end of a block (revive)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Treat (storage/graph)Driver as snapshotter
Also moved some layerStore related initialization to the non-c8d case
because otherwise they get treated as a graphdriver plugins.
Co-authored-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Djordje Lukic <djordje.lukic@docker.com>
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Initial pull/ls works
Build is deactivated if the feature is active
Signed-off-by: Djordje Lukic <djordje.lukic@docker.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These HostConfig properties were not validated until the OCI spec for the container
was created, which meant that `container run` and `docker create` would accept
invalid values, and the invalid value would not be detected until `start` was
called, returning a 500 "internal server error", as well as errors from containerd
("cleanup: failed to delete container from containerd: no such container") in the
daemon logs.
As a result, a faulty container was created, and the container state remained
in the `created` state.
This patch:
- Updates `oci.WithNamespaces()` to return the correct `errdefs.InvalidParameter`
- Updates `verifyPlatformContainerSettings()` to validate these settings, so that
an error is returned when _creating_ the container.
Before this patch:
docker run -dit --ipc=shared --name foo busybox
2a00d74e9fbb7960c4718def8f6c74fa8ee754030eeb93ee26a516e27d4d029f
docker: Error response from daemon: Invalid IPC mode: shared.
docker ps -a --filter name=foo
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
2a00d74e9fbb busybox "sh" About a minute ago Created foo
After this patch:
docker run -dit --ipc=shared --name foo busybox
docker: Error response from daemon: invalid IPC mode: shared.
docker ps -a --filter name=foo
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
An integration test was added to verify the new validation, which can be run with:
make BIND_DIR=. TEST_FILTER=TestCreateInvalidHostConfig DOCKER_GRAPHDRIVER=vfs test-integration
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
On Linux the daemon was not respecting the HostConfig.ConsoleSize
property and relied on cli initializing the tty size after the container
was created. This caused a delay between container creation and
the tty actually being resized.
This is also a small change to the api description, because
HostConfig.ConsoleSize is no longer Windows-only.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
strings.ReplaceAll(s, old, new) is a wrapper function for
strings.Replace(s, old, new, -1). But strings.ReplaceAll is more
readable and removes the hardcoded -1.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Finish the refactor which was partially completed with commit
34536c498d, passing around IdentityMapping structs instead of pairs of
[]IDMap slices.
Existing code which uses []IDMap relies on zero-valued fields to be
valid, empty mappings. So in order to successfully finish the
refactoring without introducing bugs, their replacement therefore also
needs to have a useful zero value which represents an empty mapping.
Change IdentityMapping to be a pass-by-value type so that there are no
nil pointers to worry about.
The functionality provided by the deprecated NewIDMappingsFromMaps
function is required by unit tests to to construct arbitrary
IdentityMapping values. And the daemon will always need to access the
mappings to pass them to the Linux kernel. Accommodate these use cases
by exporting the struct fields instead. BuildKit currently depends on
the UIDs and GIDs methods so we cannot get rid of them yet.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Perform the validation when the daemon starts instead of performing these
validations for each individual container, so that we can fail early.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
I had to check what the actual size was, so added it to the const's documentation.
While at it, also made use of it in a test, so that we're testing against the expected
value, and changed one alias to be consistent with other places where we alias this
import.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Trying to reduce the use of libcontainer/devices, as it's considered
to be an "internal" package by runc.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Commit dae652e2e5 added support for non-privileged
containers to use ICMP_PROTO (used for `ping`). This option cannot be set for
containers that have user-namespaces enabled.
However, the detection looks to be incorrect; HostConfig.UsernsMode was added
in 6993e891d1 / ee2183881b,
and the property only has meaning if the daemon is running with user namespaces
enabled. In other situations, the property has no meaning.
As a result of the above, the sysctl would only be set for containers running
with UsernsMode=host on a daemon running with user-namespaces enabled.
This patch adds a check if the daemon has user-namespaces enabled (RemappedRoot
having a non-empty value), or if the daemon is running inside a user namespace
(e.g. rootless mode) to fix the detection.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The io/ioutil package has been deprecated in Go 1.16. This commit
replaces the existing io/ioutil functions with their new definitions in
io and os packages.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
The "quiet" argument was only used in a single place (at daemon startup), and
every other use had to pass "false" to prevent this function from logging
warnings.
Now that SysInfo contains the warnings that occurred when collecting the
system information, we can make leave it up to the caller to use those
warnings (and log them if wanted).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This changes mounts.NewParser() to create a parser for the current operatingsystem,
instead of one specific to a (possibly non-matching, in case of LCOW) OS.
With the OS-specific handling being removed, the "OS" parameter is also removed
from `daemon.verifyContainerSettings()`, and various other container-related
functions.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- daemon.WithRootless(): make sure ROOTLESSKIT_PARENT_EUID is valid int
- daemon.RawSysInfo(): minor simplification, and rename variable that
clashed with imported package.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The runc/libcontainer apparmor package on master no longer checks if apparmor_parser
is enabled, or if we are running docker-in-docker.
While those checks are not relevant to runc (as it doesn't load the profile), these
checks _are_ relevant to us (and containerd). So switching to use the containerd
apparmor package, which does include the needed checks.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The following was failing previously, because `getUnprivilegedMountFlags()` was not called:
```console
$ sudo mount -t tmpfs -o noexec none /tmp/foo
$ $ docker --context=rootless run -it --rm -v /tmp/foo:/mnt:ro alpine
docker: Error response from daemon: OCI runtime create failed: container_linux.go:367: starting container process caused: process_linux.go:520: container init caused: rootfs_linux.go:60: mounting "/tmp/foo" to rootfs at "/home/suda/.local/share/docker/overlay2/b8e7ea02f6ef51247f7f10c7fb26edbfb308d2af8a2c77915260408ed3b0a8ec/merged/mnt" caused: operation not permitted: unknown.
```
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
libcontainer does not guarantee a stable API, and is not intended
for external consumers.
this patch replaces some uses of libcontainer/cgroups with
containerd/cgroups.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
A nil interface in Go is not the same as a nil pointer that satisfies
the interface. libcontainer/user has special handling for missing
/etc/{passwd,group} files but this is all based on nil interface checks,
which were broken by Docker's usage of the API.
When combined with some recent changes in runc that made read errors
actually be returned to the caller, this results in spurrious -EINVAL
errors when we should detect the situation as "there is no passwd file".
Signed-off-by: Aleksa Sarai <asarai@suse.de>
After dicussing with maintainers, it was decided putting the burden of
providing the full cap list on the client is not a good design.
Instead we decided to follow along with the container API and use cap
add/drop.
This brings in the changes already merged into swarmkit.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Commit 56f77d5ade added code that is doing some very ugly things.
In partucular, calling cgroups.FindCgroupMountpointAndRoot() and
daemon.SysInfoRaw() inside a recursively-called initCgroupsPath()
not not a good thing to do.
This commit tries to partially untangle this by moving some expensive
checks and calls earlier, in a minimally invasive way (meaning I
tried hard to not break any logic, however weird it is).
This also removes double call to MkdirAll (not important, but it sticks
out) and renames the function to better reflect what it's doing.
Finally, this wraps some of the errors returned, and fixes the init
function to not ignore the error from itself.
This could be reworked more radically, but at least this this commit
we are calling expensive functions once, and only if necessary.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
