Instead of special-casing anonymous endpoints in libnetwork, let the
daemon specify what (non fully qualified) DNS names should be associated
to container's endpoints.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
Rewrite `.build-empty-images` shell script that produced special images
(emptyfs with no layers, and empty danglign image) to a Go functions
that construct the same archives in a temporary directory.
Use them to load these images on demand only in the tests that need
them.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Copy the implementation of `context.WithoutCancel` introduced in Go 1.21
to be able to use it when building with older versions.
This will use the stdlib directly when building with Go 1.21+.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Integration tests will now configure clients to propagate traces as well
as create spans for all tests.
Some extra changes were needed (or desired for trace propagation) in the
test helpers to pass through tracing spans via context.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
commit ab35df454d removed most of the pre-go1.17
build-tags, but for some reason, "go fix" doesn't remove these, so removing
the remaining ones manually
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
As we have a hard time figuring out what moby/moby#46099 should look
like, this drop-in replacement will solve the initial formatting problem
we have. It's made internal such that we can remove it whenever we want
and unlike moby/moby#46099 doesn't require thoughtful API changes.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This sets BuildKit version from the build information embedded
in running binary so we are aligned with the expected vendoring.
We iterate over all dependencies and find the BuildKit one
and set the right version. We also check if the module is
replaced and use it this case.
There is also additional checks if a pseudo version is
detected. See comments in code for more info.
Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>
Starting the daemon should not load the busybox image again
in most cases, so add a new `StartNodeWithBusybox` function
to be clear that this one loads the busybox image, and use
`StartNode()` for cases where loading the busybox image is
not needed.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The daemon was already created and started with the busybox
image loaded, so there's no need to load the image again.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
While working on other tests I noticed that environment.Execution cannot
be used for anything but the pre-configured daemon, however this can
come in handy for being able share daemons across multiple tests that
currently spin up a new daemon.
The execution env also seems to be misused in some of these cases.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This is just noise due to timing. I picked `> 2` just based on
logs from tests I've seen there's always 1 or 2.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
When connecting with the daemon using a UNIX socket, the HTTP hostname was set, based
on the socket location, which was generating some noise in the test-logs.
Given that the actual hostname is not important (the URL just has to be well-formed),
the hostname/address can be cleaned up to reduce the noise.
This patch strips the path from the `addr`, and keeps `<random-id>.sock` as address.
Before:
daemon.go:329: [d15d31ba75501] error pinging daemon on start: Get http://%2Ftmp%2Fdocker-integration%2Fd15d31ba75501.sock/_ping: dial unix /tmp/docker-integration/d15d31ba75501.sock: connect: no such file or directory
After:
daemon.go:329: [d15d31ba75501] error pinging daemon on start: Get http://d15d31ba75501.sock/_ping: dial unix /tmp/docker-integration/d15d31ba75501.sock: connect: no such file or directory
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The test-integration/test=integration-cli directory contains
a directory for each daemon that was created during the integration
tests, which makes it a long list to browse through. In addition,
some tests spin up multiple daemons, and when debugging test-failures,
the daemon-logs often have to be looked at together.
This patch organizes the bundl directory to group daemon storage
locationos per test, making it easier to find information about
all the daemons that were used in a specific test.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This allows our tests, which all share a containerd instance, to be a
bit more isolated by setting the containerd namespaces to the generated
daemon ID's rather than the default namespaces.
This came about because I found in some cases we had test daemons
failing to start (really very slow to start) because it was (seemingly)
processing events from other tests.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This improves the select logic for the restart tests or starting the
daemon in general. With the way the ticker and select was setup, it was
possible for only the timeout to be displayed and not the wait errors.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Refactored exiting logic on way that layers are first marked to be under
removal so if actual removal fails they can be found from disk and
cleaned up.
Full garbage collector will be implemented as part of containerd
migration.
Signed-off-by: Olli Janatuinen <olli.janatuinen@gmail.com>
As of Go 1.12, the `testing` package panics if a goroutine logs to a
`testing.T` after the relevant test has completed. This was not
documented as a change at all; see the commit
95d06ab6c982f58b127b14a52c3325acf0bd3926 in the Go repository for the
relevant change.
At any point in the integration tests, tests could panic with the
message "Log in goroutine after TEST_FUNCTION has completed". This was
exacerbated by less direct logging I/O, e.g. running `make test` with
its output piped instead of attached to a TTY.
The most common cause of panics was that there was a race condition
between an exit logging goroutine and the `StopWithError` method:
`StopWithError` could return, causing the calling test method to return,
causing the `testing.T` to be marked as finished, before the goroutine
could log that the test daemon had exited. The fix is simple: capture
the result of `cmd.Wait()`, _then_ log, _then_ send the captured
result over the `Wait` channel. This ensures that the message is
logged before `StopWithError` can return, blocking the test method
so that the target `testing.T` is not marked as finished.
Signed-off-by: Daniel Sweet <danieljsweet@icloud.com>
This adds both a daemon-wide flag and a container creation property:
- Set the `CgroupnsMode: "host|private"` HostConfig property at
container creation time to control what cgroup namespace the container
is created in
- Set the `--default-cgroupns-mode=host|private` daemon flag to control
what cgroup namespace containers are created in by default
- Set the default if the daemon flag is unset to "host", for backward
compatibility
- Default to CgroupnsMode: "host" for client versions < 1.40
Signed-off-by: Rob Gulewich <rgulewich@netflix.com>
This adds some logs, handles timers better, and sets a request timeout
for the ping request.
I'm not sure the ticker in that loop is what we really want since the
ticker keeps ticking while we are (attempting) to make a request... but
I opted to not change that for now.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Minor improvement, but makes defining a list of options
a bit cleaner, and more descriptive;
Before:
opts := make([]func(*client.Client) error, 0)
After:
opts := make([]client.Opt, 0)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Allow specifying environment variables when installing an engine plugin
as a Swarm service. Invalid environment variable entries (without an
equals (`=`) char) will be ignored.
Signed-off-by: Sune Keller <absukl@almbrand.dk>
