Now that most uses of reexec have been replaced with non-reexec
solutions, most of the reexec.Init() calls peppered throughout the test
suites are unnecessary. Furthermore, most of the reexec.Init() calls in
test code neglects to check the return value to determine whether to
exit, which would result in the reexec'ed subprocesses proceeding to run
the tests, which would reexec another subprocess which would proceed to
run the tests, recursively. (That would explain why every reexec
callback used to unconditionally call os.Exit() instead of returning...)
Remove unneeded reexec.Init() calls from test and example code which no
longer needs it, and fix the reexec.Init() calls which are not inert to
exit after a reexec callback is invoked.
Signed-off-by: Cory Snider <csnider@mirantis.com>
integration/config/config_test.go:106:31: empty-lines: extra empty line at the end of a block (revive)
integration/secret/secret_test.go:106:31: empty-lines: extra empty line at the end of a block (revive)
integration/network/service_test.go:58:50: empty-lines: extra empty line at the end of a block (revive)
integration/network/service_test.go:401:58: empty-lines: extra empty line at the end of a block (revive)
integration/system/event_test.go:30:38: empty-lines: extra empty line at the end of a block (revive)
integration/plugin/logging/read_test.go:19:41: empty-lines: extra empty line at the end of a block (revive)
integration/service/list_test.go:30:48: empty-lines: extra empty line at the end of a block (revive)
integration/service/create_test.go:400:46: empty-lines: extra empty line at the start of a block (revive)
integration/container/logs_test.go:156:42: empty-lines: extra empty line at the end of a block (revive)
integration/container/daemon_linux_test.go:135:44: empty-lines: extra empty line at the end of a block (revive)
integration/container/restart_test.go:160:62: empty-lines: extra empty line at the end of a block (revive)
integration/container/wait_test.go:181:47: empty-lines: extra empty line at the end of a block (revive)
integration/container/restart_test.go:116:30: empty-lines: extra empty line at the end of a block (revive)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The TODO comment was in regards to allowing graphdriver plugins to
provide their own ContainerFS implementations. The ContainerFS interface
has been removed from Moby, so there is no longer anything which needs
to be figured out.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Updating test-code only; set ReadHeaderTimeout for some, or suppress the linter
error for others.
contrib/httpserver/server.go:11:12: G114: Use of net/http serve function that has no support for setting timeouts (gosec)
log.Panic(http.ListenAndServe(":80", nil))
^
integration/plugin/logging/cmd/close_on_start/main.go:42:12: G112: Potential Slowloris Attack because ReadHeaderTimeout is not configured in the http.Server (gosec)
server := http.Server{
Addr: l.Addr().String(),
Handler: mux,
}
integration/plugin/logging/cmd/discard/main.go:17:12: G112: Potential Slowloris Attack because ReadHeaderTimeout is not configured in the http.Server (gosec)
server := http.Server{
Addr: l.Addr().String(),
Handler: mux,
}
integration/plugin/logging/cmd/dummy/main.go:14:12: G112: Potential Slowloris Attack because ReadHeaderTimeout is not configured in the http.Server (gosec)
server := http.Server{
Addr: l.Addr().String(),
Handler: http.NewServeMux(),
}
integration/plugin/volumes/cmd/dummy/main.go:14:12: G112: Potential Slowloris Attack because ReadHeaderTimeout is not configured in the http.Server (gosec)
server := http.Server{
Addr: l.Addr().String(),
Handler: http.NewServeMux(),
}
testutil/fixtures/plugin/basic/basic.go:25:12: G112: Potential Slowloris Attack because ReadHeaderTimeout is not configured in the http.Server (gosec)
server := http.Server{
Addr: l.Addr().String(),
Handler: http.NewServeMux(),
}
volume/testutils/testutils.go:170:5: G114: Use of net/http serve function that has no support for setting timeouts (gosec)
go http.Serve(l, mux)
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Implement a ReadJSON() utility to help reduce some code-duplication,
and to make sure we handle JSON requests consistently (e.g. always
check for the content-type).
Differences compared to current handling:
- prevent possible panic if request.Body is nil ("should never happen")
- always require Content-Type to be "application/json"
- be stricter about additional content after JSON (previously ignored)
- but, allow the body to be empty (an empty body is not invalid);
update TestContainerInvalidJSON accordingly, which was testing the
wrong expectation.
- close body after reading (some code did this)
We should consider to add a "max body size" on this function, similar to
7b9275c0da/api/server/middleware/debug.go (L27-L40)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Finish the refactor which was partially completed with commit
34536c498d, passing around IdentityMapping structs instead of pairs of
[]IDMap slices.
Existing code which uses []IDMap relies on zero-valued fields to be
valid, empty mappings. So in order to successfully finish the
refactoring without introducing bugs, their replacement therefore also
needs to have a useful zero value which represents an empty mapping.
Change IdentityMapping to be a pass-by-value type so that there are no
nil pointers to worry about.
The functionality provided by the deprecated NewIDMappingsFromMaps
function is required by unit tests to to construct arbitrary
IdentityMapping values. And the daemon will always need to access the
mappings to pass them to the Linux kernel. Accommodate these use cases
by exporting the struct fields instead. BuildKit currently depends on
the UIDs and GIDs methods so we cannot get rid of them yet.
Signed-off-by: Cory Snider <csnider@mirantis.com>
The io/ioutil package has been deprecated in Go 1.16. This commit
replaces the existing io/ioutil functions with their new definitions in
io and os packages.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Discovered a few instances, where loop variable is incorrectly used
within a test closure, which is marked as parallel.
Few of these were actually loops over singleton slices, therefore the issue
might not have surfaced there (yet), but it is good to fix there as
well, as this is an incorrect pattern used across different tests.
Signed-off-by: Roman Volosatovs <roman.volosatovs@docker.com>
pkg/devicemapper/devmapper.go:383:28: S1039: unnecessary use of fmt.Sprintf (gosimple)
if err := task.setMessage(fmt.Sprintf("@cancel_deferred_remove")); err != nil {
^
integration/plugin/graphdriver/external_test.go:321:18: S1039: unnecessary use of fmt.Sprintf (gosimple)
http.Error(w, fmt.Sprintf("missing id"), 409)
^
integration-cli/docker_api_stats_test.go:70:31: S1039: unnecessary use of fmt.Sprintf (gosimple)
_, body, err := request.Get(fmt.Sprintf("/info"))
^
integration-cli/docker_cli_build_test.go:4547:19: S1039: unnecessary use of fmt.Sprintf (gosimple)
"--build-arg", fmt.Sprintf("FOO1=fromcmd"),
^
integration-cli/docker_cli_build_test.go:4548:19: S1039: unnecessary use of fmt.Sprintf (gosimple)
"--build-arg", fmt.Sprintf("FOO2="),
^
integration-cli/docker_cli_build_test.go:4549:19: S1039: unnecessary use of fmt.Sprintf (gosimple)
"--build-arg", fmt.Sprintf("FOO3"), // set in env
^
integration-cli/docker_cli_build_test.go:4668:32: S1039: unnecessary use of fmt.Sprintf (gosimple)
cli.WithFlags("--build-arg", fmt.Sprintf("tag=latest")))
^
integration-cli/docker_cli_build_test.go:4690:32: S1039: unnecessary use of fmt.Sprintf (gosimple)
cli.WithFlags("--build-arg", fmt.Sprintf("baz=abc")))
^
pkg/jsonmessage/jsonmessage_test.go:255:4: S1039: unnecessary use of fmt.Sprintf (gosimple)
fmt.Sprintf("ID: status\n"),
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
=== RUN TestServicePlugin
plugin_test.go:42: assertion failed: error is not nil: error building basic plugin bin: no required module provides package github.com/docker/docker/testutil/fixtures/plugin/basic: go.mod file not found in current directory or any parent directory; see 'go help modules'
: exit status 1
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This was changed as part of a refactor to use containerd dist code. The
problem is the OCI media types are not compatible with older versions of
Docker.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This fixes a panic when an admin specifies a custom default runtime,
when a plugin is started the shim config is nil.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This removes the use of the old distribution code in the plugin packages
and replaces it with containerd libraries for plugin pushes and pulls.
Additionally it uses a content store from containerd which seems like
it's compatible with the old "basicBlobStore" in the plugin package.
This is being used locally isntead of through the containerd client for
now.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This enables image lookup when creating a container to fail when the
reference exists but it is for the wrong platform. This prevents trying
to run an image for the wrong platform, as can be the case with, for
example binfmt_misc+qemu.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Configuration over the API per container is intentionally left out for
the time being, but is supported to configure the default from the
daemon config.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit cbecf48bc352e680a5390a7ca9cff53098cd16d7)
Signed-off-by: Madhu Venugopal <madhu@docker.com>
This supplements any log driver which does not support reads with a
custom read implementation that uses a local file cache.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit d675e2bf2b75865915c7a4552e00802feeb0847f)
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Premature check for OS type means that the test
will never even get to run on other OS types. This
will cause it to be always flagged as a failure on
such OS types.
Signed-off-by: vikrambirsingh <vikrambir.singh@docker.com>
```
integration/plugin/graphdriver/external_test.go:427:2: SA5001: should check returned error before deferring responseReader.Close() (staticcheck)
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
1. Use `go list` to get list of integration dirs to build. This means we
do not need to have a valid `.go` in every subdirectory and also
filters out other dirs like "bundles" which may have been created.
2. Add option to specify custom flags for integration and
integration-cli. This is needed so both suites can be run AND set
custom flags... since the cli suite does not support standard go
flags.
3. Add options to skip an entire integration suite.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
